Diivoo 4존 스프링클러 타이머 사용 설명서

소개

Thank you for choosing the Diivoo 4 Zone Sprinkler Timer. This programmable automatic irrigation timer is designed to simplify your garden watering, offering independent control over four separate zones. With features like rain delay and manual watering modes, it provides flexibility and efficiency for your lawn, yard, and pool watering needs. Please read this manual thoroughly before operation to ensure proper setup and optimal performance.

안전 정보

• Do not immerse the timer in water. The unit is IP54 rated for water resistance, but not submersion.
• Use only 2 AA 1.5V alkaline batteries. Do not mix old and new batteries, or different types of batteries.
• 모든 연결 부분이 단단히 조여져 누수가 발생하지 않도록 하세요.
• Operate within recommended water pressure limits to avoid damage.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• Protect from freezing temperatures. Remove batteries and store indoors during winter.

제품 끝view

구성 요소

그림 1: 전면 view of the Diivoo 4 Zone Sprinkler Timer, showing the large LCD display, control buttons, and four hose outlets.

• 메인 유닛: Houses the control panel, LCD display, and battery compartment.
• 입구 커넥터: Connects to your outdoor faucet (standard 3/4" garden hose thread). Features reinforced nylon fiber for durability.
• Four Outlet Connectors: Each outlet can be connected to a separate hose or irrigation line.
• 제어 버튼: For navigation and setting adjustments (OK, ESC/OFF, +, -, DELAY).
• LCD 디스플레이: Large screen showing current time, program settings for each zone (A, B, C, D), and status indicators.

주요 특징

• 4개의 독립적인 급수 구역: Allows separate scheduling for different areas.
• 프로그래밍 가능한 일정: Set start time, watering duration (1s-360min), and frequency (every 1 min to 24 hrs, or every day to every 15 days).
• 비 지연 기능: Skip watering cycles to conserve water during rainy periods.
• 수동 물뿌리기 모드: Initiate immediate watering without affecting programmed schedules.
• 대형 LCD 디스플레이: 3.2 x 2 inch screen for easy readability and quick operation.
• IP54 방수 기능: 내구성이 뛰어나며 야외 사용에 적합합니다.
• 낮은 전력 소모: Battery life up to 6-8 months with 2 AA batteries (not included).
• 저전력 보호: Valve automatically shuts off when battery is too low to prevent water waste.

설정

1. 배터리 설치

타이머에는 1.5V AA 알칼리 건전지 2개(별도 구매)가 필요합니다.

1. 타이머 뒷면에서 배터리 구획을 찾으세요.
2. 배터리 커버를 밀어서 엽니다.
3. 새로운 AA 알카라인 배터리 2개를 올바른 극성(+/-)에 맞춰 삽입합니다.
4. Close the battery cover securely. The battery cover has a seal to isolate moisture.

Figure 2: Image showing the battery compartment and reinforced nylon fiber connection, highlighting the leakproof design.

2. 타이머 연결

1. 실외 수도꼭지가 잠겨 있는지 확인하십시오.
2. Screw the timer's inlet connector onto any standard 3/4" garden outdoor faucet. Hand-tighten only. Do not overtighten.
3. Connect your garden hoses to the four independent outlets (A, B, C, D) at the bottom of the timer.
4. Turn on your outdoor faucet. The timer is designed to withstand typical household water pressure.

작동 지침

Understanding the LCD Display and Controls

Figure 3: Close-up of the large LCD screen and the 7-button quick setup panel.

The large LCD display shows various information including the current time, battery level, active zone indicators (A, B, C, D), start time, watering duration, watering frequency, and next start time. The control panel features buttons for navigation and setting adjustments:

• OK : Confirm selection or enter setting mode.
• ESC/OFF: Exit current setting, return to previous screen, or turn off the timer.
• +: Increase value or move forward in menu.
• -: Decrease value or move backward in menu.
• 지연: Activate/deactivate rain delay.
• NOW/ABCD: Switch between current time display and zone selection.

1. 현재 시간 설정

1. 를 누르세요 OK button to enter setting mode. The time display will flash.
2. 사용하세요 + or - 시간을 조정하려면 버튼을 누르세요. OK 확인합니다.
3. 분을 조정하려면 다음을 사용하세요. + or -, 그런 다음 누르세요 OK 확인합니다.
4. 누르다 키보드 설정 모드를 종료합니다.

2. Programming Automatic Watering Schedules (4 Zones)

The Diivoo timer allows you to set independent watering schedules for each of its four zones (A, B, C, D).

Figure 4: Visual representation of four independent irrigation zones (Zone 1, Zone 2, Zone 3, Zone 4) for customized watering.

Figure 5: Display showing options for setting Start Time, Watering Duration (1s to 360min), and Watering Frequency (Every 1H-23H or Every 1-15 Days).

1. 를 누르세요 NOW/ABCD button to select the desired zone (A, B, C, or D). The selected zone indicator will flash.
2. 누르다 OK to enter programming for the selected zone.
3. 시작 시간 설정: 사용 + or - to adjust the hour and minutes for the watering start time. Press OK 각 조정 후.
4. Set Watering Duration ("How Long"): 사용 + or - to set the watering duration from 1 second to 360 minutes. Press OK 확인합니다.
5. Set Watering Frequency ("How Often"):
   • 사용 + or - to select frequency in hours (e.g., every 1 hour to 23 hours). Press OK.
   • Alternatively, select frequency in days (e.g., every 1 day to 15 days). Press OK.
   • You can also set specific days of the week for watering. Navigate through the days and press OK to select/deselect.
6. After setting all parameters for the zone, press 키보드 to save and exit. Repeat for other zones as needed.

메모: Adequate water pressure is required when all 4 zone ports are operating simultaneously. If water pressure is insufficient, it is recommended to rotate the use of the 4 zone ports to avoid reduced water flow through each port.

3. 수동 급수 모드

Manual watering allows you to water immediately without interrupting your preset programs.

Figure 6: Illustration of manual watering in progress, showing the ability to set individual watering times for each zone from 1 second to 360 minutes.

1. 메인 화면에서 OK button (water drop icon).
2. 사용 + or - to select the desired watering duration (from 1 second to 360 minutes).
3. 누르다 OK to start manual watering. The selected zone(s) will begin watering immediately.
4. 수동 급수를 중지하려면 누르세요. ESC/꺼짐.

4. 비 지연 기능

The rain delay feature allows you to temporarily pause your watering schedule to avoid overwatering and save water during rainy conditions. The timer does not have a rain sensor, so you will need to activate this manually based on local weather forecasts.

Figure 7: Display showing the Rain Delay feature, indicating that the next watering schedule will be skipped. This feature aids in water conservation and allows for postponed schedules.

1. In the "ON" state (main display), press and hold the + 버튼을 5초간 누르세요.
2. The "DELAY" icon will appear on the screen, and the "NEXT START" time will update to reflect the postponed schedule.
3. To deactivate rain delay, press and hold the + 버튼을 다시 5초 동안 누릅니다.

5. 제품 비디오 가이드

유지

• 청소: 광고로 타이머 지우기amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 배터리 교체: Replace batteries when the low battery indicator appears on the LCD. It is recommended to replace batteries every 6-8 months or at the start of each watering season.
• 겨울철 : Before the first frost, remove the timer from the faucet. Remove the batteries. Store the timer indoors in a dry, protected area to prevent damage from freezing water.
• 필터 청소: Periodically check the filter washer inside the inlet connector for debris. Clean if necessary to ensure proper water flow.

문제 해결

명세서

• 모델: HCT-379
• 제품 크기: 6.46 x 5.59 x 2.99 인치
• 품목 무게: 1.85파운드
• 전원: AA 1.5V 알칼리 배터리 2개 (별도 구매)
• 물주기 시간: 1초 ~ 360분
• 물주기 빈도: Every 1 minute to 24 hours, or Every 1 day to 15 days
• 방수 기능: IP54
• 입구 나사산: Standard 3/4" Garden Hose Thread
• 설정 수: 16

보증 및 지원

Diivoo products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your Diivoo 4 Zone Sprinkler Timer, please contact Diivoo customer service. Our team of experts is available to assist you.

Please refer to the contact information provided with your product packaging or visit the official Diivoo web최신 지원 세부 정보는 사이트에서 확인하세요.

Diivoo Official Store: Diivoo Store on Amazon