Telwin Drive 1800 Kompressor

Telwin Drive 1800 Kompressor - Instruction Manual

Model: Drive 1800 Kompressor | Brand: Telwin

1. 소개 및 이상view

The Telwin Drive 1800 Kompressor is a compact, multi-functional 12V lithium emergency starter designed for various vehicles including motorcycles, cars, campers, marine engines, and vans. This device integrates an air compressor for tire inflation, a power bank for electronic device charging, and a high-intensity LED light. It utilizes high-efficiency LiPo lithium batteries for quick and complete charging, ensuring a compact and lightweight design. This manual provides essential information for the safe and effective use of your device.

2. 안전 정보

이 제품을 사용하기 전에 모든 안전 경고와 지침을 읽으세요. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

Telwin Drive 1800 Kompressor accessories including jump start cables, air hose, nozzles, and storage case.

Figure 3.1: Included accessories for the Telwin Drive 1800 Kompressor.

4. 제품 특징 및 구성품

Familiarize yourself with the main components of your Telwin Drive 1800 Kompressor.

앞쪽 view of the Telwin Drive 1800 Kompressor showing the control panel and display.

그림 4.1: 전면 view of the Telwin Drive 1800 Kompressor.

뒤쪽에 view of the Telwin Drive 1800 Kompressor showing USB-A output, USB-C input, and jump start port.

그림 4.2: 후면 view with charging and output ports.

Close-up of the control panel on the Telwin Drive 1800 Kompressor with power, mode, and light buttons.

그림 4.3: 상세 view 제어판의.

5. 설정

5.1 초기 충전

Before first use, fully charge the Telwin Drive 1800 Kompressor. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The LCD display will indicate charging status. Charging time may vary.

5.2 공기 호스 부착

To use the compressor function, securely screw the removable air hose into the designated port on the device. Ensure a tight connection to prevent air leakage.

6. 사용 설명서

6.1 차량 점프 스타트

  1. Ensure the Telwin Drive 1800 Kompressor is sufficiently charged.
  2. 차량의 점화 장치와 모든 부속품을 끄세요.
  3. 연결하다 빨간색 양(+) clamp 차량 배터리의 양극(+) 단자에 연결합니다.
  4. 연결하다 검은색 음(-) clamp to a metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect directly to the negative battery terminal unless specified by the vehicle manufacturer.
  5. CL을 확인amps are securely attached and do not touch each other.
  6. Turn on the Telwin Drive 1800 Kompressor.
  7. 차량 시동을 걸어보세요. 시동이 즉시 걸리지 않으면 30초 정도 기다렸다가 다시 시도하세요. 한 번에 3초 이상 시동을 걸려고 하지 마세요.
  8. 차량이 시동되면 즉시 분리하십시오. 검은색 음(-) clamp 먼저 빨간색 양(+) clamp.
Telwin Drive 1800 Kompressor connected to a car battery for jump starting.

Figure 6.1: Jump starting a vehicle using the Telwin Drive 1800 Kompressor.

6.2 공기 압축기 사용 방법

  1. Ensure the air hose is securely attached to the device.
  2. Select the appropriate inflation nozzle and attach it to the air hose.
  3. 노즐을 공기를 주입할 대상(예: 타이어 밸브)에 연결하십시오.
  4. Turn on the Telwin Drive 1800 Kompressor.
  5. Use the mode button to select the desired inflation mode (car, SUV, bicycle, inflatables, custom).
  6. Use the +/- buttons to set the target pressure. The LCD display will show the current and target pressure.
  7. Press the power button to start inflation. The compressor will automatically stop when the target pressure is reached.
  8. 노즐과 에어 호스를 분리하세요.
Telwin Drive 1800 Kompressor being used to inflate a car tire.

Figure 6.2: Inflating a car tire with the integrated compressor.

6.3 파워뱅크로 사용하기

To charge electronic devices, connect your device's USB charging cable to the USB-A output port (OUT: 5V==2.4A) on the Telwin Drive 1800 Kompressor. The device will automatically begin charging.

6.4 LED 조명 사용하기

Press the dedicated light button on the control panel to cycle through the LED light modes:

Telwin Drive 1800 Kompressor with its LED light activated, illuminating a dark area.

Figure 6.3: The LED light in operation.

7. 유지관리

8. 문제 해결

문제가능한 원인해결책
장치가 켜지지 않습니다.배터리가 소진되었습니다.USB-C 케이블을 사용하여 기기를 완전히 충전하세요.
차량 점프 스타트가 불가능합니다.잘못된 clamp connection; vehicle battery too deeply discharged; device battery too low.확인amp connections (red to +, black to chassis); ensure device is fully charged; consult vehicle manual.
Compressor not inflating.Air hose not securely attached; nozzle not properly connected; target pressure not set.Check all connections; ensure nozzle is firmly attached; set target pressure on the display.
LED 조명이 작동하지 않습니다.Device battery is depleted; light button not pressed correctly.Charge the device; press the light button firmly to cycle modes.

9. 사양

10. 보증 및 지원

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Telwin web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.