소개
This manual provides detailed instructions for the assembly, installation, and maintenance of your Bed Bath & Beyond Entryway Wall Mounted Coat Rack, Model LGEW40939293. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
The wall-mounted coat rack features a solid MDF construction with a smooth white paint finish, designed to provide additional storage and organization in your entryway or other suitable areas. It includes a top shelf, three built-in cubbies, and four dual steel hooks.
안전 정보
- 조립하기 전에 모든 부품이 있고 손상되지 않았는지 확인하세요.
- Do not overtighten screws during assembly to prevent damage to the MDF panels.
- Mount the unit securely to a wall stud or use appropriate wall anchors for drywall installation to ensure stability and prevent tipping.
- Do not exceed the recommended weight capacity for the shelf or hooks. (Note: Specific weight capacity not provided in source data, general safety advice.)
- 조립하는 동안 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
Before starting assembly, verify that all components listed below are present and undamaged. All necessary hardware is included in the package.
- MDF Panels (various sizes for shelf, cubbies, and back panel)
- 4 x Dual Steel Hooks
- Assembly Hardware (screws, dowels, wall anchors if applicable)
- 사용 설명서
설정 및 조립
Assembly is required. It is recommended to assemble the unit on a soft, clean surface to prevent scratches. Two people may be required for safe installation.
필요한 도구:
- Phillips 헤드 스크루 드라이버
- 드릴(벽면 장착용)
- 수준
- 줄자
- 연필
조립 단계:
- 구성 요소 풀기: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts against the package contents list.
- 선반 구조 조립하기: Follow the included diagram (not provided, but implied by "easy assemble is required with all hardware packed in the package") to connect the MDF panels to form the top shelf and cubby structure. Secure with screws as indicated.
- 뒷면 패널 부착: Secure the back panel to the assembled shelf structure using the provided screws.
- 후크 설치: Attach the four dual steel hooks to the designated positions on the lower front panel of the unit using the provided screws. Ensure they are tightened securely.
Figure 1: Assembled Bed Bath & Beyond Wall Mounted Coat Rack (White)
벽 장착 지침:
- 위치를 선택하십시오 : Select a suitable wall location, preferably where wall studs can be utilized for maximum stability.
- 마크 장착 지점: Hold the assembled unit against the wall at the desired height. Use a level to ensure it is straight. Mark the positions of the mounting holes on the wall with a pencil.
- 드릴 파일럿 홀: Drill pilot holes at the marked locations. If mounting into drywall without studs, use appropriate wall anchors (not explicitly stated if included, but standard practice).
- 벽에 고정: Align the unit with the pilot holes and secure it to the wall using the provided mounting screws. Ensure the unit is firmly attached and stable before placing items on it.
그림 2: 후면 view 장착 지점 표시
작동 지침
The Bed Bath & Beyond Entryway Wall Mounted Coat Rack is designed for organizing various items in your home.
- Top Shelf and Cubbies: Use the top shelf and the three built-in cubbies to display decorative items, store small baskets, or organize personal belongings such as keys, wallets, or small plants.
- Dual Hooks: The four dual hooks are suitable for hanging coats, hats, scarves, purses, backpacks, or towels. Distribute weight evenly across the hooks.
그림 3: 예ample of usage in an entryway
Figure 4: Close-up of cubby and hook usage
유지 보수 및 관리
- 청소: 부드러운 d로 표면을 닦으십시오.amp 천을 사용하십시오. 마감 처리가 손상될 수 있는 강한 화학 물질이나 연마성 세제는 사용하지 마십시오.
- 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 중량 제한: Do not overload the shelf or hooks. While specific weight limits are not provided, avoid placing excessively heavy items to prevent damage or detachment from the wall.
문제 해결
If you encounter any issues with your coat rack, refer to the following common solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Unit feels unstable after mounting. | Improper wall mounting; screws not fully tightened; insufficient wall anchors. | Ensure unit is mounted into wall studs or use appropriate heavy-duty wall anchors. Tighten all mounting screws securely. |
| 고리가 느슨합니다. | Screws attaching hooks are loose. | Retighten the screws securing the hooks to the panel. |
| 표면에 긁힌 자국이 있습니다. | Abrasive cleaning materials used; impact from sharp objects. | Use a soft cloth for cleaning. Avoid sharp objects. Minor scratches may be touched up with white furniture paint (not included). |
명세서
- 모델 이름: LGEW40939293
- 상표: 베드 배스 앤 비욘드
- 재료: MDF Panel, Steel Hooks
- 색상: 하얀색
- 치수(길이 x 너비 x 높이): 980mm x 200mm x 350mm (approximately 38.58" x 7.87" x 13.78")
- 고리 개수: 4 Dual Hooks
- 저장: 3 Built-in Cubbies, 1 Top Shelf
그림 5: 제품 치수
보증 및 지원
Specific warranty information is not provided in the product details. For any questions regarding assembly, missing parts, or product support, please contact Bed Bath & Beyond customer service through their official web제품을 구매한 사이트 또는 소매업체.
추가 지원이 필요하면 다음을 방문하세요. Bed Bath & Beyond brand page on Amazon or the retailer's support channels.