1. 서론
The OSRAM LEDguardian ROAD FLARE Signal V16 IoT is a DGT 3.0 certified LED warning light designed to enhance roadside safety. This device provides a highly visible signal to alert other drivers to your presence in emergency situations. It features real-time localization capabilities and is mandatory for use in Spain from January 1, 2026, replacing traditional warning triangles.
주요 특징은 다음과 같습니다.
- 360° amber flashing light for maximum visibility.
- DGT 3.0 certification with anonymous data transfer to the DGT platform for real-time vehicle localization.
- 140 lumen light output with a range of up to 1000 meters.
- Integrated 9V battery providing up to 2.5 hours of operation.
- Magnetic base for quick and secure attachment to vehicle surfaces.
- Durable and weather-resistant design (IP54 rated).
2. 안전 정보
- Always ensure the device is securely attached to a metallic surface on your vehicle, such as the roof, to prevent it from falling.
- Do not stare directly into the light source when activated, as it can cause eye strain.
- This device is intended as a warning signal. It does not replace the need to contact emergency services (police, ambulance, etc.) in case of an accident or breakdown.
- Check local traffic regulations regarding the use of auxiliary warning lights, especially outside of Spain.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
모든 항목이 있는지 확인하세요.
- 1 x OSRAM LEDguardian ROAD FLARE Signal V16 IoT device
- 1 x 9V battery (pre-installed or separate)
- 사용 설명서 (본 문서)
4. 설정
4.1. 배터리 설치
The device typically comes with a 9V battery pre-installed. If not, or if replacing the battery:
- Locate the battery compartment cover on the underside of the device.
- 뚜껑을 비틀거나 밀어서 여세요.
- 올바른 극성(+/-)을 확인한 후 새 9V 배터리를 삽입합니다.
- 배터리 덮개를 단단히 닫으세요.
A battery indicator is present to inform you about the battery status.
4.2. Initial Activation and DGT 3.0 Connectivity
The device is designed for immediate use. Upon activation, it automatically connects to the DGT 3.0 platform to signal your vehicle's position. No manual setup for connectivity is required from the user.
Diagram illustrating DGT 3.0 connectivity and real-time localization. The warning light sends anonymous data to the DGT 3.0 platform, which then relays the vehicle's position to other road users and emergency services.
5. 사용 설명서
5.1. Activating the Warning Light
To activate the amber flashing warning light:
- Remove the device from its storage location (e.g., glove compartment).
- Press the main power button located on the top of the device. The amber flashing light will activate automatically.
- Place the device on a flat, metallic surface of your vehicle, such as the roof, using its magnetic base. Ensure it is stable and visible from all directions.
Collage showing various ways to deploy and activate the OSRAM LEDguardian ROAD FLARE Signal V16 IoT, including placing it on a vehicle roof and holding it for activation.
The OSRAM LEDguardian ROAD FLARE Signal V16 IoT deployed on a vehicle roof at night, providing high visibility.
5.2. Using the Flashlight Function
The device also includes a white light flashlight function for practical use during emergencies, such as inspecting a tire or finding items in the dark.
- To activate the flashlight, press the dedicated flashlight button (often indicated by a light bulb icon).
- 다시 누르면 손전등이 꺼집니다.
Video demonstrating the quick deployment of the V16 warning light with its magnetic base and its high visibility at night.
비디오 쇼asing the V16 warning light's features, including its magnetic attachment, amber flashing mode, and integrated white flashlight function.
6. 유지관리
6.1. 배터리 교체
When the battery indicator shows low power, replace the 9V battery following the instructions in Section 4.1. Use only high-quality 9V alkaline batteries for optimal performance and battery life.
6.2. 청소
부드러운 천으로 장치를 청소하십시오.amp 천을 사용하십시오. 연마성 세제나 용제를 사용하지 마십시오. 천이 손상될 수 있습니다.asing or internal components. Ensure the device is dry before storage.
7. 문제 해결
- 장치가 켜지지 않음: 9V 배터리가 올바르게 설치되었는지, 그리고 충전량이 충분한지 확인하십시오. 필요한 경우 배터리를 교체하십시오.
- 빛이 희미하다: This indicates a low battery. Replace the 9V battery.
- Device not adhering to vehicle: Ensure the surface is clean, dry, and metallic. The magnetic base requires a suitable metal surface for secure attachment.
- DGT 3.0 connectivity issues: The device is designed for automatic connectivity. If you suspect issues, ensure the device is activated and in an open area with clear signal reception. Contact OSRAM support if problems persist.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 | LEDguardian ROAD FLARE Signal V16 IoT |
| 제조업체 | 오스람 |
| 제품 치수 | 11.5 x 11.5 x 9.5cm |
| 품목 무게 | 199그램 |
| 라이트 타입 | LED (발광 다이오드) |
| 밝은 색상 | 앰버(1900K) |
| 빔 각도 | 360도 |
| 광 출력 | 140루멘 |
| 조명 범위 | 최대 1000미터 |
| 전원 | 배터리 작동식 (9V 배터리 1개 포함) |
| 배터리 수명 | 최대 2.5시간 |
| 재료 | Metal (for screen material, likely casing includes other materials) |
| 장착 유형 | Roof mounting (magnetic) |
| 인증 | DGT 3.0 certified |
상세한 view of the OSRAM LEDguardian ROAD FLARE Signal V16 IoT with key features labeled, including DGT 3.0 certification, weather resistance, battery indicator, LED count, light range, magnetic base, and integrated SIM card.
Technical drawing showing the dimensions of the OSRAM LEDguardian ROAD FLARE Signal V16 IoT, with height and diameter measurements.
9. 보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the official OSRAM website or contact your local OSRAM dealer. Keep your purchase receipt as proof of purchase.
