ACEZUK M06 6000A Car Jump Starter with 150PSI Air Compressor User Manual

1. 제품 오버view

주요 특징

• 6000A Jump Starter: Capable of reliably jump-starting 12V vehicles (all gasoline engines and up to 12.0L diesel engines) in seconds, even in temperatures ranging from -20°C to 60°C. Provides up to 70 jump starts on a single charge. Suitable for automobiles, trucks, motorcycles, boats, lawnmowers, yachts, pickups, and snowmobiles.
• 150PSI Portable Air Compressor: Designed for rapid inflation of all tires from 0 PSI to 150 PSI. Features dual-cylinder technology for a fast inflation rate of 50 LPM (1.76 CFM).
• Digital Pressure Gauge & Automatic Shut-off: Equipped with a real-time LED digital pressure gauge for accurate readings. Allows selection of preset modes (car, bicycle, motorcycle, ball) and automatically stops inflation once the desired PSI is reached.
• 21800mAh 파워뱅크: Functions as a power bank with Type-C input (5V/3A, 9V/2A) and dual USB outputs (5V/3A) to charge personal devices like cell phones and tablets. Recommended charging the jump starter with a 5V/2A adapter or higher.
• 실용적인 디자인 : Features a unique 3.4-inch large LCD screen displaying operational status, battery level, and potential errors. Includes a 600 lumens LED light with 3 modes (constant light, strobe, SOS) for outdoor activities or emergencies. An additional small light is integrated for illuminating the inflation operation area.
• Smart Jump Cables: Provides 8 types of protection, including protection against overheating, overcharge, over-discharge, over-voltage, short-circuit, reverse polarity, and anti-interference.

패키지 내용

• 1 x ACEZUK M06 Jump Starter with Air Compressor
• 1 x Smart Jump Cable
• 1 x Air Pump Hose
• 4 x Gas Nozzles
• 1 x USB-C 충전 케이블
• 1 x 사용자 설명서
• 휴대용 EVA 운반 케이스 1개

2. 안전 정보

본 제품을 사용하기 전에 모든 안전 지침을 읽고 이해하십시오. 지침을 따르지 않을 경우 감전, 화재 및/또는 심각한 부상이 발생할 수 있습니다.

• Do not operate the air pump continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before resuming inflation.
• Avoid over-inflating tires, as this can cause damage. If a tire is over-inflated, gently press the tire valve to release excess air.
• Always ensure correct polarity when connecting the jump cables to the vehicle battery terminals. Incorrect connection can cause sparks, damage the device, or harm the user.
• 장치와 액세서리를 어린이의 손이 닿지 않는 곳에 보관하십시오.
• Do not attempt to disassemble, modify, or repair the device. This will void the warranty and may lead to hazards.
• Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
• Use only the provided smart jump cables and accessories with this device.

3. 설정

장치 충전하기

Before initial use, fully charge the ACEZUK M06. It is recommended to charge the device every 3-4 months to maintain optimal battery health, especially if not in regular use.

1. Connect the provided USB-C charging cable to the device's Type-C input port.
2. Connect the other end of the USB-C cable to a 5V/2A or higher USB power adapter (not included).
3. The LCD screen will display the charging status and battery level. Charge until the battery indicator shows 100%.

초기 검사

Upon receiving your ACEZUK M06, perform a quick inspection:

• Check the device and all accessories for any visible damage.
• '패키지 내용물' 섹션에 나열된 모든 구성품이 있는지 확인하십시오.

4. 사용 설명서

4.1 차량 점프 스타트

차량을 안전하게 점프 스타트하려면 다음 단계를 따르세요.

1. 차량의 시동이 꺼져 있고 주차 브레이크가 걸려 있는지 확인하십시오.
2. Insert the smart jump cable plug completely into the jump starter's designated port. The red and green lights on the clamp will flash alternately, indicating it's ready.
3. 빨간색 cl을 연결하세요amp 차량 배터리의 양극(+) 단자에 연결하십시오.
4. 검은색 cl을 연결하세요amp 차량 배터리의 음극(-) 단자에 연결하세요.
5. If the indicator light on the smart cable flashes red and green alternately, and the vehicle does not start, press and hold the forced start button on the smart cable for 3 seconds until the light turns solid green. This bypasses safety checks for severely discharged batteries.
6. Start the vehicle's engine within 30 seconds of the indicator light turning solid green.
7. 차량 시동이 걸리면 즉시 클립을 제거하십시오.amps from the battery terminals within 30 seconds. First, remove the black clamp그러면 빨간색amp.

4.2 공기 압축기 사용 방법

To inflate tires or other inflatables:

1. ON/OFF 버튼을 눌러 장치의 전원을 켭니다.
2. Briefly press the air pump button (usually indicated by a tire icon) to enter inflation mode. The screen will display the current pressure.
3. Press the 'M' (Mode) button to cycle through and select the appropriate inflation mode (e.g., car, bicycle, motorcycle, ball).
4. Use the '+' and '-' buttons to adjust the desired target air pressure. You can also change the unit of measurement (PSI, BAR, KPA) if available.
5. Connect the air pump hose securely to the tire valve or the appropriate gas nozzle for other inflatables.
6. Press and hold the air pump button for 3 seconds to begin inflation.
7. 사전 설정된 압력에 도달하면 압축기가 자동으로 멈춥니다.
8. Briefly press the air pump button again to exit inflation mode.

4.3 파워뱅크로 사용하기

The ACEZUK M06 can charge your electronic devices:

1. Connect your mobile phone, tablet, or other USB-powered device to one of the dual USB output ports (5V/3A) on the jump starter.
2. 기기가 연결된 기기를 자동으로 충전하기 시작합니다.

4.4 LED 조명 사용하기

내장형 LED 조명은 다양한 상황에 필요한 조명을 제공합니다.

1. Press the light button (usually indicated by a light bulb icon) to turn on the LED light.
2. Press the button repeatedly to cycle through the 3 modes: constant light, strobe, and SOS signal.
3. An additional small light is located on the bottom of the product to specifically illuminate the area around the tire valve during inflation.

5. 유지관리

Proper maintenance ensures the longevity and optimal performance of your ACEZUK M06:

• 저장: Store the device in its portable EVA carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• 충전재: If the device is not used regularly, recharge it every 3-4 months to prevent deep discharge and maintain battery health.
• 청소: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure all ports are free from dust and debris.
• 케이블 관리: Inspect the smart jump cables and air pump hose regularly for any signs of wear or damage. Replace if necessary.

6. 문제 해결

If you encounter issues with your ACEZUK M06, refer to the table below for common problems and their solutions:

7. 사양

• 상표: 에이스주크
• 모델: M06
• 피크 전류 : 6000 Amp에레스
• 배터리 용량: 21800mAh(리튬 이온)
• 차량 서비스 유형: Automotive (All Gas, up to 12.0L Diesel)
• 권tage: 12 볼트
• 공기 압축기 압력: 0-150 PSI
• 공기 흐름 율 : 50 LPM (1.76 CFM)
• Type-C 입력: 5V/3A, 9V/2A
• USB 출력: 듀얼 5V/3A
• LED 조명: 600 Lumens (3 modes: Light/Strobe/SOS)
• 작동 온도: -20°C ~ 60°C
• 제품 무게: 1.57kg
• 패키지 크기: 21.1 x 17.3 x 14.4cm

8. 보증 및 지원

ACEZUK is committed to providing high-quality products and excellent customer service.

• 보증: This product comes with a 2-year FREE warranty from the date of purchase.
• 기술 지원: Lifetime technical support is available for all ACEZUK M06 users.
• 고객 서비스: 저희 고객 서비스팀은 질문이나 문의 사항이 있으시면 24시간 연중무휴로 도와드리겠습니다.

For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided with your purchase or visit the official ACEZUK web지원 리소스 사이트.