소개
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your HAIBOXING M1828 Brushed Motor with Pinion. This motor is designed as a replacement part for HAIBOXING 1/18th scale RC car models 18858, 18859, and 18868. Please read these instructions carefully to ensure proper use and longevity of the product.
제품 끝view
The HAIBOXING M1828 is a brushed motor specifically designed for 1/18th scale remote control vehicles. It comes pre-assembled with a pinion gear, ready for installation. This component is crucial for the propulsion system of your RC truck.
Image: The HAIBOXING M1828 brushed motor with an attached pinion gear and electrical connector. This is the primary component for RC vehicle propulsion.
안전 정보
No specific safety information is provided by the manufacturer for this component. However, when working with RC electronics and mechanical parts, always observe general safety precautions:
- Ensure the RC vehicle's power source is disconnected before performing any installation or maintenance.
- Handle electrical components with care to avoid short circuits.
- 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
- Wear appropriate eye protection if necessary during installation.
설정 및 설치
This section outlines the general procedure for replacing the brushed motor in compatible HAIBOXING 1/18th scale RC vehicles (models 18858, 18859, 18868).
필요한 도구:
- 소형 십자 드라이버
- 작은 일자 드라이버(선택 사항, 들어올리기용)
- 니들노즈 플라이어(옵션)
설치 단계:
- 전원 분리: Ensure the RC vehicle's battery is disconnected to prevent accidental operation or electrical shorts.
- 접근 모터실: Carefully remove the body shell of your RC vehicle. Depending on the model, you may need to remove screws or clips to access the motor and gearbox area.
- 기존 모터를 분리하십시오: Locate the existing motor. Disconnect its electrical connector from the Electronic Speed Controller (ESC). Note the orientation of the wires (red to positive, black to negative) if not color-coded on the connector.
- 기존 모터를 제거하세요: Unscrew any mounting screws holding the motor in place. Carefully slide the motor out, ensuring the pinion gear disengages from the main gear.
- Inspect Pinion (if separate): The M1828 motor comes with a pre-installed pinion. If your old motor's pinion needs to be transferred or adjusted, ensure it is securely fastened and correctly aligned with the main gear.
- 새 모터 설치: Insert the new HAIBOXING M1828 motor into the motor mount. Ensure the pinion gear meshes correctly with the main gear. There should be a small amount of play (backlash) between the gears to prevent binding.
- 모터 고정: Fasten the motor with the mounting screws. Do not overtighten.
- 전선을 연결하십시오: Connect the motor's electrical connector to the ESC. Ensure the polarity is correct (red to red, black to black).
- 테스트 기능: Before reattaching the body shell, connect the battery and perform a brief test to ensure the motor spins freely and the wheels turn correctly.
- 재조립: Reattach the body shell and any other components removed during the process.
이미지: 각도 view of the M1828 motor, showing the pinion and connector. Useful for identifying the component.
이미지: 측면 view of the M1828 motor, highlighting the cooling fins and wiring. Important for proper orientation during installation.
이미지: 위에서 아래로 view of the M1828 motor, showing the overall shape and connector placement. Aids in visual confirmation.
작동 고려 사항
Once installed, the motor operates as part of your RC vehicle's drivetrain. To ensure optimal performance and longevity:
- 적절한 전원 공급 장치: Ensure your battery and Electronic Speed Controller (ESC) are compatible with the motor's requirements. Using an incompatible power source can damage the motor or ESC.
- 과열을 피하세요: Continuous high-stress operation, especially in hot environments or with incorrect gearing, can lead to motor overheating. Monitor motor temperature during use.
- 장애물 제거: Avoid operating the vehicle in conditions where debris (sand, dirt, small rocks) can easily enter the motor or gear mesh, as this can cause damage.
유지
Regular maintenance helps extend the life of your brushed motor:
- 청소: Periodically remove the motor from the vehicle and gently clean any accumulated dust, dirt, or debris from the motor casing and cooling fins using a soft brush or compressed air.
- Pinion Inspection: Check the pinion gear for wear, bent teeth, or damage. Replace if necessary. Ensure it is securely attached to the motor shaft.
- Brush Inspection (Advanced): For advanced users, if the motor is serviceable, inspect the carbon brushes for wear. Worn brushes can reduce performance and eventually cause motor failure.
- 매끄럽게 하기: The motor itself typically does not require lubrication. However, ensure the gears it meshes with are properly lubricated according to your RC vehicle's manual.
문제 해결
If you encounter issues with your motor, consider the following:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모터가 회전하지 않음 |
|
|
| 모터 과열 |
|
|
| 모터에서 이상한 소음이 난다 |
|
|
| 출력/속도 감소 |
|
|
명세서
- 모델 번호: M1828
- 호환성: HAIBOXING 1/18th Scale RC Car Models 18858, 18859, 18868
- 유형: Brushed Motor with Pinion
- 재료: 금속
- 제품 크기: 약 2 x 2 x 3인치
- 품목 무게: 2.4 온스
- 추천 연령: 14 years and up (for RC vehicle operation)
보증 및 지원
For warranty information or technical support, please refer to the documentation provided with your original HAIBOXING RC vehicle or contact HAIBOXING customer service directly. You can also visit the official HAIBOXING store for more information: HAIBOXING Store.
