1. 서론
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your MOUNTUP MU0057-L Full Motion TV Wall Mount. Please read all instructions carefully before installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.
The MOUNTUP MU0057-L is designed to securely mount most 42-75 inch flat or curved screen televisions weighing up to 99 lbs (45 kg). It features a 30-inch extension arm, +/-90° swivel, +5°/-10° tilt, and +/-3° leveling for optimal view유연성.
2. 안전 정보
경고: 이 지침을 읽고 따르지 않을 경우 심각한 부상, 재산 피해 또는 보증 무효화가 발생할 수 있습니다.
- 중량 용량: Do not exceed the maximum weight capacity of 99 lbs (45 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
- TV 크기 : This mount is compatible with TVs from 42 to 75 inches.
- VESA 호환성: Ensure your TV's VESA pattern (mounting hole spacing) is within the range of 150x100mm to 600x400mm.
- 벽 유형: This mount is designed for installation on solid concrete/brick walls or single wood studs. 건식벽체에만 설치하지 마십시오.
- 전문적인 설치: If you have any doubts about your ability to safely install this mount, consult a qualified professional.
- 구성 요소 확인: Before installation, verify that all components are present and undamaged. Do not use damaged or defective parts.
- 도구: 설치에 적합한 도구를 사용하십시오.
3. 패키지 내용
Please check the package to ensure all parts are included and undamaged. If any parts are missing or damaged, contact MOUNTUP customer service.
- 벽판 조립체
- TV 브래킷 (2)
- 장착 하드웨어 키트(다양한 나사, 와셔, 스페이서, 앵커)
- 버블 레벨
- 드릴링 템플릿
- 사용 설명서
4. 사양
| 사양 | 값 |
|---|---|
| 모델 | MU0057-L |
| TV 크기 호환성 | 42~75인치 |
| 중량 용량 | 최대 99kg(45파운드) |
| VESA 호환성 | 150x100mm ~ 600x400mm |
| 벽에서 연장된 부분 | 3인치(수축 시)에서 30인치(확장 시)까지 |
| 스위블 범위 | +/-90° |
| 기울기 범위 | +5° / -10° |
| 레벨 조정 | +/-3° |
| 재료 | 금속 |
| 색상 | 검은색 |
| 품목 무게 | 13.77파운드 |
메모: The TV plate is offset approximately 8.5 inches (215mm) from the wall plate center. Consider this when positioning your TV on the wall.
Image: TV Plate Offset Diagram
5. 설치 지침
5.1 설치 전 확인 사항
- TV 호환성 확인: Check your TV's size, weight, and VESA mounting pattern. The VESA pattern refers to the four mounting holes on the back of your TV.
- 벽 유형 식별: Determine if your wall is solid concrete/brick or a single wood stud.
- Check TV Ports: Ensure the mount will not block any necessary ports on your TV.
Image: Available VESA Patterns and TV Mounting Holes
Image: Diverse Wall Compatibility
Image: Ensure Mount Won't Block Ports
5.2 단계별 설치
The installation process involves three main steps:
- TV 마운트 브래킷: Attach the TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are securely fastened.
- 벽면 플레이트 설치: Using the provided drilling template and bubble level, mark and drill pilot holes in your wall. Secure the wall plate assembly to the wall with the appropriate anchors and lag bolts.
- TV를 벽면 고정판에 걸어주세요: Carefully lift your TV with the attached brackets and hook them onto the wall plate. Secure the TV to the wall plate using the safety screws or locking mechanisms.
Image: Easy & Quick 3-Step Installation Overview
6. 운영 및 조정
6.1 확장 및 수축
The mount allows your TV to extend up to 30 inches from the wall and retract to approximately 3 inches, providing flexibility for various viewing positions and saving space when not in use.
Image: Mount Extension and Retraction
6.2 회전 조절
The articulating arm allows for a smooth +/-90° swivel, enabling you to adjust the TV's angle to suit different viewing areas within a room, including corner mounting scenarios.
Image: Wide Swivel Range for Corner Mounting
6.3 기울기 조정
Adjust the TV's vertical angle with a +5°/-10° tilt range. This feature helps reduce glare from lights or windows and provides a comfortable view잉 각도.
6.4 수평 조정
After installation, you can make minor horizontal adjustments of +/-3° to ensure the TV is perfectly level.
Image: Level and Tilt Adjustments
7. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 패스너 점검: 모든 나사와 볼트가 단단히 조여져 있는지 주기적으로 확인하고, 필요한 경우 다시 조이십시오.
- 움직임 확인: Test the mount's full range of motion (extension, retraction, swivel, tilt) occasionally to ensure smooth operation.
8. 문제 해결
설치 중이나 설치 후에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
- TV가 수평이 아닙니다: Use the +/-3° post-installation leveling feature to adjust the TV's horizontal position.
- 마운트가 느슨해진 느낌: Re-check all wall and TV fasteners to ensure they are securely tightened. Do not overtighten.
- 팔을 움직이는 데 어려움이 있습니다. The mount's joints may be stiff initially. Apply gentle force. If persistent, ensure no cables are snagged.
- TV not fitting VESA pattern: Double-check your TV's VESA pattern against the mount's specifications (150x100mm to 600x400mm). If incompatible, the mount cannot be used.
9. 보증 및 지원
MOUNTUP is dedicated to providing quality products and customer satisfaction. While specific warranty details are not provided in this document, MOUNTUP offers comprehensive support.
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact MOUNTUP customer service. Experts are available 7 days a week to provide support and advanced technology solutions.
For more information or to contact support, please visit the official MOUNTUP store or web대지.
