소개
This manual provides essential instructions for the safe installation, operation, and maintenance of your Cangaroo i-Swift i-Size Booster Seat. Designed for children between 125-150 cm in height (approximately 4 to 12 years old) and up to 36 kg, this booster seat ensures comfort and safety during travel. Please read this manual thoroughly before first use and keep it for future reference.
안전 정보
- Always secure the child with the vehicle's 3-point seat belt.
- Ensure the booster seat is correctly installed using the ISOFIX system, even when not occupied by a child, to prevent it from becoming a projectile in an accident.
- 부품이 손상되었거나 누락된 경우 부스터 시트를 절대 사용하지 마십시오.
- Do not modify the booster seat in any way.
- Always follow the vehicle manufacturer's instructions for child restraint installation.
- The booster seat is designed for forward-facing use only.
- Regularly check that the seat belt is not twisted and is correctly positioned over the child's shoulder and lap.
설정 및 설치
The Cangaroo i-Swift i-Size Booster Seat is designed for quick and easy installation using the ISOFIX system.
- Prepare the Booster Seat: Ensure the ISOFIX connectors are retracted.
- ISOFIX 앵커 위치를 찾으세요: Identify the ISOFIX anchor points in your vehicle's rear seat. These are usually located between the seat back and cushion.
- ISOFIX 커넥터를 연결하십시오: Extend the ISOFIX connectors from the booster seat and push them firmly onto the vehicle's ISOFIX anchor points until you hear an audible "click" and the indicators turn green (if applicable).
- Secure the Booster Seat: Push the booster seat firmly against the vehicle's seat back to ensure a tight fit.
- 컵홀더를 설치하세요: Attach the cup holder to the designated slot on the side of the booster seat. Ensure it is securely fastened.
이미지: 측면 view of the Cangaroo i-Swift i-Size booster seat, showing the extended ISOFIX connectors ready for installation.
이미지: 클로즈업 view of the detachable cup holder, designed with an anti-spill system and soft silicone seal.
작동 지침
Once the booster seat is securely installed, follow these steps to properly secure your child:
- Position the Child: Place your child on the booster seat, ensuring their back is flat against the seat back.
- 안전벨트를 연결하세요: Pull the vehicle's 3-point seat belt over the child. The lap belt portion should lie low across the child's hips, touching the thighs. The shoulder belt should cross the center of the child's shoulder and chest, not touching the neck or falling off the shoulder.
- 안전벨트를 매세요: Insert the seat belt buckle tongue into the vehicle's buckle receiver until it clicks.
- Tighten the Seat Belt: Pull the shoulder belt upwards to remove any slack, ensuring the belt is snug against the child's body without being too tight.
- Check Belt Position: Verify that the seat belt is correctly positioned and not twisted. The booster seat's design helps guide the belt for optimal placement.
이미지: 정면도 view of the Cangaroo i-Swift i-Size booster seat, showcasing its ergonomic design and integrated cup holder.
유지
- 커버 청소: The booster seat cover is removable and washable. Refer to the care label for specific washing instructions, typically machine wash cold on a gentle cycle. Do not bleach or tumble dry.
- 프레임 청소: Wipe the plastic parts of the booster seat frame with a damp 천과 순한 비누. 연마성 세척제나 솔벤트를 사용하지 마십시오.
- 컵 홀더: The cup holder can be detached and washed separately with soap and water.
- 점검: Regularly inspect the booster seat for any signs of wear, damage, or loose parts. If any damage is found, discontinue use and contact customer support.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Booster seat feels loose after ISOFIX installation. | ISOFIX connectors not fully engaged or seat not pushed firmly against vehicle seat back. | Ensure ISOFIX connectors click into place (green indicators visible). Push the booster seat firmly towards the vehicle's seat back to remove any gaps. |
| Vehicle seat belt is twisted or not fitting correctly. | Incorrect routing of the seat belt. | Unbuckle the belt, straighten it, and re-route it according to the "Operating Instructions" section, ensuring it passes through the designated guides on the booster seat. |
| Cup holder is not secure. | Not properly attached to the slot. | Ensure the cup holder is pushed firmly into its designated slot until it locks into place. |
명세서
- 모델 번호: 111391
- 상표: 캉가루
- 유형: i-사이즈 부스터 시트
- 어린이 신장 범위: 125~150cm
- 대략적인 연령대: 4 - 12년
- 최대 지원 무게: 36kg
- 설치 방법: ISOFIX (forward-facing)
- 구속 시스템: Vehicle's 3-point seat belt
- 주요 소재: 소재 (폴리에스터 100%)
- 제품 크기(길이 x 너비 x 높이): 40 x 43 x 22cm
- 제품 무게: 2.8kg
- 안전 기준: ECE-R129/03
- 특별 기능: Ergonomic design, breathable cover, removable and washable cover, comfortable armrests, integrated cup holder with anti-spill function.
보증 및 지원
Specific warranty information for the Cangaroo i-Swift i-Size Booster Seat may vary by region and retailer. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or further assistance, please contact your local Cangaroo distributor or the retailer from whom you purchased the product. You may also visit the official Cangaroo web연락처 정보와 추가 자료는 해당 사이트를 참조하세요.
제조업체: 캉가루
ASIN: B0DMQFJV23
