1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP Freelift Pro Dual Monitor Mount. Please read this guide thoroughly before installation to ensure correct setup and safe usage. This monitor mount is designed to enhance your workspace ergonomics and free up desk space by securely holding two monitors.
2. 안전 정보
- 조립하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 불량인 경우 사용하지 마십시오.
- Follow all assembly steps carefully. Incorrect installation may result in product damage or personal injury.
- 팔당 최대 하중 10kg(22lbs)을 초과하지 마십시오.
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitors.
- Do not install on tempered glass table tops.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
3. 패키지 내용
아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하십시오.
- Main Pole and Base
- Dual Gas Spring Arms
- VESA 플레이트 (2개)
- C-Clamp 집회
- 그로밋 베이스 어셈블리
- 하드웨어 키트(나사, 와셔, 스페이서)
- 육각렌치 (다양한 크기)
- 케이블 관리 클립
Refer to the 'Package List' section in the installation video for a visual guide to all included components.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates the unboxing and initial setup steps, including a visual overview 모든 부분의.
4. 설정
4.1 Choose Mounting Type
The MOUNTUP Freelift Pro offers two installation options: C-Clamp or Grommet Mount. Select the method best suited for your desk.
- C-Clamp 산: For desk thickness within 0.39''-2.76''.
- 그로밋 마운트: For desk thickness within 0.39''-2.76'' and hole diameter within 0.39''-2.36''.
Image: Two Installation Options - Illustrates the C-clamp and grommet mounting methods with desk thickness and hole diameter specifications.
4.2 Base Installation (C-Clamp 또는 그로밋)
Follow the instructions in the video for your chosen mounting type:
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates both C-clamp and grommet base installation steps from 0:03 to 0:34.
4.3 Arm Installation
Attach the gas spring arms to the installed base as shown in the video.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates arm installation from 0:35 to 0:45.
4.4 VESA 플레이트를 모니터에 부착
Secure the VESA plate to the back of your monitor using the provided screws. Ensure the plate is firmly attached.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates attaching the VESA plate to the monitor from 0:46 to 0:51.
4.5 Slide Monitor onto Arm
Carefully slide the monitor (with attached VESA plate) onto the arm's mounting head until it clicks into place. Secure it with the locking knob.
Image: Quick Release VESA Plate - Shows the quick-release VESA plate mechanism for easy monitor attachment and removal.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates sliding the monitor onto the arm from 0:52 to 0:56.
5. 사용 설명서
5.1 모니터 위치 조정
The Freelift Pro Dual Monitor Mount offers full motion adjustment for optimal view편안함:
- 경사: +85° ~ -45°
- 받침: 180° (at VESA plate), 360° (at arm joint), 270° (at base joint)
- 회전: 360° (세로에서 가로로)
- 높이 조정: Max height up to 17.3 inches (from desk surface)
- 확대: Each arm extends up to 21 inches
Image: Freely Position Your Screen - Highlights the maximum height and extension capabilities of the monitor arms.
Image: Optimize Your View - Demonstrates the swivel, height, tilt, and rotation ranges for flexible monitor positioning.
Image: Full Motion Adjustment - Details the extensive swivel capabilities at different points of the monitor arm.
Video: Freelift Pro Dual Monitor Arm Function - Demonstrates the full range of motion, including tilt, swivel, and rotation.
5.2 가스 스프링 장력 조정
The gas spring tension may need adjustment depending on your monitor's weight. Use the provided Allen key to adjust the tension screw located on the arm.
- To reduce tension (for lighter monitors or if arms are too stiff): Turn the screw clockwise (towards '-').
- To increase tension (for heavier monitors or if arms are falling down): Turn the screw counter-clockwise (towards '+').
Each turn needs to be a full 360 degrees. Hold the arm in a horizontal position during adjustment.
Image: Gas Spring Adjust - Provides a visual guide for adjusting gas spring tension and tilt.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates resetting spring tension from 1:06 to 1:11.
6. 케이블 관리
Route your monitor cables through the integrated cable management channels on the arms to maintain a tidy workspace.
Image: Organize Wires and Tools - Shows how to manage cables and store Allen keys within the arm for convenience.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates cable management from 0:57 to 1:02.
7. 유지관리
- 모든 나사와 연결부가 단단히 조여져 있고 안전한지 정기적으로 점검하십시오.
- Clean the monitor mount with a soft, damp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- Periodically re-adjust gas spring tension if monitors feel too loose or too stiff over time.
8. 문제 해결
If you encounter any issues with your monitor mount, refer to the common problems and solutions below:
8.1 Arms Falling Down / Can't Rise Up
This indicates that the gas spring tension is too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise ('+') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.2 Arms Rising Up / Can't Fall Down
This indicates that the gas spring tension is too high for your monitor's weight. Decrease the tension by turning the adjustment screw clockwise ('-') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.3 Monitors Face Down / Can't Be Adjusted Tilt
The tilting bolt may be too tight. Loosen the tilting bolt (towards '-') with an Allen key, adjust the monitor to your desired angle, then retighten the bolt (towards '+') to fix the angle.
8.4 Swivels Left and Right is Loose / Monitor Can't Swivel
Adjust the tightness of the swivel screw using an Allen key. Tighten or loosen as needed to achieve the desired swivel resistance.
Video: Freelift Pro Dual Monitor arm trouble shooting - This video provides visual guidance for adjusting tension, tilt, and swivel to resolve common issues.
9. 사양
| 특징 | 사양 |
|---|---|
| 호환 모니터 크기 | 22" - 32" (flat or curved LCD) |
| 팔당 최대 하중 용량 | 4.4 - 22파운드(2 - 10kg) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 기울기 범위 | +85° ~ -45° |
| 스위블 범위 | 180° (at VESA plate), 360° (at arm joint), 270° (at base joint) |
| 회전 | 360° |
| Max Height (from desk) | 17.3인치 |
| Max Extension (per arm) | 21인치 |
| 장착 옵션 | C-Clamp, 그로밋 |
| C-Clamp 책상 두께 | 0.39인치 - 2.76인치 |
| 그로밋 데스크 두께 | 0.39인치 - 2.76인치 |
| 그로밋 구멍 직경 | 0.39인치 - 2.36인치 |
| 재료 | 합금강 |
Image: Perfect For Your Screen - Overview of product compatibility including load capacity, screen size, and VESA patterns.
10. 보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact MOUNTUP customer service directly. Keep your purchase receipt for warranty claims.
