Kicker KS-Series 6x9 Coaxial Speakers Instruction Manual
Model: 51KSC6904
소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Kicker KS-Series 6x9 Coaxial Speakers (Model 51KSC6904). Please read this manual thoroughly before attempting installation or operation to ensure proper use and to maximize the performance and longevity of your speakers.
중요한 안전 정보
- 전문 설치 권장: For optimal performance and safety, it is highly recommended that these speakers be installed by a qualified car audio professional.
- 파워 핸들링: 귀하의 것을 확인하십시오 amplifier's power output matches the recommended power handling of these speakers to prevent damage. Overpowering or underpowering can lead to speaker failure.
- 배선: Always use appropriate gauge wiring for speaker connections. Incorrect wiring can cause overheating or damage to your audio system.
- 통풍: Ensure adequate ventilation around the speakers and amp과열을 방지하는 lifier.
- 청력 보호: 높은 볼륨에 장시간 노출되면 영구적인 청력 손상을 초래할 수 있습니다. 볼륨 조절 시 주의하세요.
패키지 내용
Before beginning installation, please verify that all the following items are included in your package:
- 2 x Kicker 51KSC6904 KS-Series 6x9" Coaxial Speakers
- 2 x 1" Silk-dome Tweeters (integrated)
- 2 x 스피커 그릴
- 장착 하드웨어(나사, 클립)
- 1 x Kicker Branded Can Koozie (bundle accessory)
Image: Pair of Kicker KS-Series 6x9 Coaxial Speakers with grilles.
Image: One Kicker KS-Series 6x9 Coaxial Speaker with its protective grille.
Image: One Kicker KS-Series 6x9 Coaxial Speaker without its grille, showing the cone and tweeter.
Image: A single protective grille for the Kicker KS-Series 6x9 speaker.
Image: Kicker branded can koozie, included as a bundle accessory.
설치 가이드
장착 고려 사항
The Kicker KS-Series speakers feature a thin-mount design, allowing them to fit easily behind most factory grilles and in various vehicle applications. Before mounting, ensure the chosen location provides sufficient clearance for the speaker's depth and diameter.
- 장착 구멍 직경: 5-11/16 x 8-7/16 inches (14.45 x 21.43 cm)
- Top Mount Depth: 3-3/16인치(8.1cm)
- Bottom Mount Depth: 3-11/16인치(9.37cm)
- Tweeter Protrusion: 1/16 인치(0.16cm)
Use the provided mounting hardware to secure the speakers firmly in place. Avoid over-tightening screws, which can damage the speaker frame.
배선 지침
These speakers have a rated impedance of 4 ohms. Connect the speakers to an amplifier that is stable at a 4-ohm load and provides a recommended power output of up to 150 watts RMS per channel. Ensure correct polarity (+ to + and - to -) when connecting the speaker wires to both the speaker terminals and the amplifier terminals. Incorrect polarity can lead to reduced bass response and poor sound imaging.
It is recommended to use high-quality speaker wire of appropriate gauge (e.g., 16-gauge or thicker) for optimal power transfer and sound quality.
작업
설치가 완료되면 오디오 소스를 연결하세요. amp증폭기. 다음으로 시작하세요. amplifier's gain settings at their minimum and gradually increase them until the desired volume is achieved without distortion. These speakers are designed to deliver clear and detailed audio reproduction across a wide frequency range.
침입 기간: Like many audio components, these speakers may benefit from a break-in period. Play them at moderate volumes for several hours before attempting to play them at their maximum capabilities. This allows the speaker's suspension components to loosen and perform optimally.
유지 보수 및 관리
- 청소: Use a soft, dry cloth to clean the speaker grilles and surrounds. Avoid using harsh chemicals or abrasive cleaners.
- 환경 조건: While designed for automotive use, avoid exposing the speakers to excessive moisture, extreme temperatures, or direct sunlight for prolonged periods, as this can degrade materials over time.
- 점검: Periodically inspect speaker cones and surrounds for any signs of damage or wear.
문제 해결
If you experience issues with your Kicker KS-Series speakers, refer to the table below for common problems and their solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않음 | 느슨하거나 연결이 끊어진 배선 Amp리파이어 전원이 켜지지 않음 Incorrect input selection on head unit | 모든 스피커를 확인하세요 amp리퍼 연결 확인하다 amplifier power and fuse Ensure correct audio source is selected |
| 왜곡되거나 불분명한 소리 | Amp리파이어 게인이 너무 높게 설정됨 스피커 전선이 단락됨 손상된 스피커 콘/서라운드 | 줄이다 amp리파이어 게인 배선에 단락이 있는지 점검하십시오. Contact Kicker support for speaker inspection/replacement |
| 저음이 약하거나 없음 | Incorrect speaker polarity 크로스오버 설정이 잘못되었습니다. 불충분하다 amp리파이어 파워 | Verify speaker wire polarity Adjust head unit or amplifier crossover settings 보장하다 amplifier provides adequate power |
| 간헐적인 소리 | 느슨한 연결 과열 amp리퍼 | 모든 배선 연결부를 확인하십시오. 적절한 환기를 확보하십시오. amplifier; reduce volume |
기술 사양
| 특징 | 사양 |
|---|---|
| 스피커 디자인 | 양방향 동축 |
| 우퍼 크기 | 6x9인치 |
| 트위터 크기 | 1 인치 |
| 정격 임피던스 | 4옴 |
| 추천 Amp변환기 전력(RMS) | 150 와트 |
| 감광도 | 92데시벨 |
| 주파수 응답 | 30 ~ 21kHz |
| 장착 구멍 직경 | 5-11/16 x 8-7/16 inches (14.45 x 21.43 cm) |
| Top Mount Depth | 3-3/16인치(8.1cm) |
| Bottom Mount Depth | 3-11/16인치(9.37cm) |
| 트위터 돌출부 | 1/16 인치(0.16cm) |
| 우퍼 소재 | Polypropylene with Rubber Surrounds |
| 트위터 소재 | Silk-dome |
| 품목 무게 | 15.9파운드(7.21kg) |
| 패키지 크기 | 18.63 x 12 x 4.44인치(47.32 x 30.48 x 11.28cm) |
보증 및 고객 지원
Kicker products are designed for durability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Kicker web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
If you require technical assistance, troubleshooting beyond this manual, or warranty service, please contact Kicker customer support through their official website or authorized service centers. Provide your product model number (51KSC6904) and a detailed description of the issue when contacting support.
