소개
This manual provides detailed instructions for the installation, operation, and maintenance of your AIDA Single Pole Motion Sensor Light Switch. This device is designed to enhance convenience and energy efficiency by automatically controlling lighting based on occupancy. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The AIDA Single Pole Motion Sensor Light Switch shown alongside its product packaging, highlighting its design and key features.
중요한 안전 정보
WARNING: RISK OF ELECTRIC SHOCK. Improper installation can be dangerous or illegal. Always consult a qualified electrician if you are unsure about any part of the installation process.
- 전원 끄기: 스위치를 설치하거나 정비하기 전에 항상 회로 차단기 또는 퓨즈 박스에서 전원을 차단하십시오.
- 중성선 필요: This device requires a neutral wire for proper operation. If your electrical box does not have a neutral wire, this switch is not compatible.
- Single Pole Only: This switch is designed for single-pole control only and is not suitable for 3-way or multiple-way circuits.
- UL/CUL Certified: The switch is UL and CUL listed, ensuring compliance with safety standards.
- 운영 볼륨tage: Ensure your electrical system operates at 120 Volts (AC).
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- AIDA Single Pole Occupancy Motion Sensor Light Switch
- 나사 없는 벽면 플레이트
- Wire Nuts (Terminal caps)
- 장착 나사
- 사용 설명서(본 문서)
제품 사양
| 특징 | 세부 사항 |
|---|---|
| 입력 정격 | 120/277V~50/60Hz |
| Applicable Load Types | 200W LED/CFL, 500W MLV, 500W INC/HAL, 5A Ballast (120V), 1/6HP Fan (4.4A 120V) |
| 스위치 유형 | 단극 |
| 철사 게이지 | #14 - #12 AWG |
| 배선 유형 | 터미널 캡 |
| 작동 온도 | 화씨 32도에서 화씨 104도(섭씨 0도에서 40도) |
| 제품 크기 | 4.17"x1.73"x1.77" (106x44x45mm) |
| 재료 | 구리, 황동(접촉 재료) |
| 제어 방법 | Sensor, Touch |
Image: A visual representation of the product dimensions and a detailed table of specifications for the AIDA motion sensor switch.
Image: A chart illustrating the universal compatibility of the AIDA motion sensor switch with various load types including LED/CFL, MLV, INV/HAL, Ballast, and Fan.
설정 및 설치
시작하기 전에:
- 전원 끄기: Locate your circuit breaker panel and turn off the power to the switch box you will be working on. Verify power is off using a voltag전자 테스터.
- 전선 식별: Carefully remove the existing wall plate and switch. Identify the following wires:
- Line Wire (Black): 회로 차단기에서 전력을 공급받습니다.
- Load Wire (Black): 조명기구에 전력을 공급합니다.
- 중성선(흰색): Required for this switch.
- Ground Wire (Green or Bare Copper): 안전을 위해서입니다.
- Confirm Neutral Wire: This switch requires a neutral wire. If you do not have a neutral wire (typically white) in your electrical box, this switch is not compatible.
배선 지침:
Follow the wiring diagram carefully. Use the provided wire nuts to secure connections.
Image: A detailed wiring diagram showing connections for the AIDA motion sensor light switch, including Line, Load, Neutral, and Ground wires. It explicitly states that a neutral wire is required and the switch is not suitable for 3-way or multiple-way circuits.
- 연결하다 녹색 wire from the switch to your house's 지면 철사.
- 연결하다 하얀색 wire from the switch to your house's 중립적 철사.
- 연결하다 검은색 wire from the switch to your house's 선 (열선.
- 연결하다 빨간색 wire from the switch to your house's 짐 wire (to the light fixture).
Important: Ensure all connections are secure and insulated with wire nuts. This switch is for single-pole applications only. Do not use in 3-way or multi-way circuits.
스위치 장착:
- Carefully fold the wires and push the switch into the electrical box.
- Secure the switch to the electrical box using the provided screws.
- Attach the screwless wall plate.
- 회로 차단기에서 전원을 복구하세요.
Image: A diagram showing the precise dimensions of the AIDA motion sensor light switch, its mounting bracket, and the screwless wall plate for easy installation.
Operating Instructions and Customization
The AIDA motion sensor switch offers various modes and adjustable settings to suit your needs.
작동 모드 :
- Occupancy Mode (Auto-On/Auto-Off): Lights automatically turn ON when motion is detected and OFF after a set delay when no motion is detected. Ideal for high-traffic areas like bathrooms, laundry rooms, and kitchens.
- Vacancy Mode (Manual-On/Auto-Off): Lights must be manually turned ON, but will automatically turn OFF after a set delay when no motion is detected. Suitable for bedrooms or TV rooms where you prefer manual control for turning on lights.
조정 가능한 설정:
The switch features internal dip switches for customizing settings. Carefully remove the faceplate to access these controls.
이미지: 클로즈업 view of the AIDA motion sensor switch's internal settings, showing dip switches for Adjustable Light Level (Timeout), PIR Sensitivity, and Ambient Light Sensor Mode.
- Adjustable Light Level (Timeout): This setting determines how long the light stays on after the last detected motion. Options typically include 30 seconds, 1 minute, 5 minutes, 15 minutes, or 30 minutes. Refer to the switch's internal labels for specific settings.
- PIR 감도 : Adjusts the sensitivity of the Passive Infrared (PIR) sensor to detect motion. Settings range from Low (L) to High (H). A higher sensitivity detects smaller movements or movements at a greater distance.
- Ambient Light Sensor Mode: Controls how the switch reacts to ambient light.
- 낮음/높음: The switch will only turn on lights if the ambient light level is below a certain threshold (e.g., only turn on at night).
- 끄다: The ambient light sensor is disabled, and the switch will turn on lights regardless of ambient light.
- 관습: Allows for more specific ambient light level adjustments.
Note: After adjusting any internal settings, reattach the faceplate securely.
이미지: 자세한 view of the AIDA motion sensor switch with its cover removed, showing the dip switches for adjusting timeout, PIR sensitivity, and ambient light sensor mode.
유지
The AIDA Motion Sensor Light Switch is designed for long-lasting, maintenance-free operation. To ensure optimal performance:
- 청소: 스위치와 벽면 커버를 주기적으로 부드러운 천으로 닦아주세요.amp 천으로 닦으세요. 연마성 세제나 용제는 마감재나 내부 부품을 손상시킬 수 있으므로 사용하지 마세요.
- 방해: Ensure the sensor lens is not obstructed by furniture, decorations, or other objects, as this can impair motion detection.
- 사용자가 수리할 수 없는 부품: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit beyond adjusting the dip switches.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Light does not turn ON with motion. |
|
|
| Light stays ON constantly. |
|
|
| Light turns OFF too quickly or too slowly. |
|
|
| Switch makes a clicking noise. |
|
|
보증 및 고객 지원
AIDA products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official AIDA web대지.
If you encounter any issues or have questions regarding your AIDA Single Pole Motion Sensor Light Switch, please contact our customer support team:
- Web대지: Visit the AIDA Store on Amazon (일반적인 제품 정보)
- 이메일: 제품 포장이나 공식 문서를 참조하세요. web연락처 이메일 사이트입니다.
- 핸드폰: 제품 포장이나 공식 문서를 참조하세요. web연락처 전화번호를 알려주는 사이트입니다.
Please have your model number (B0DM4SGNBQ) and purchase date ready when contacting support.
