소개
Thank you for choosing the VEVOR Adjustable Height Projector Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new projector stand. Please read these instructions thoroughly before use and retain them for future reference.
The VEVOR projector stand features an adjustable tray and robust load capacity, securely holding both your projector and laptop. This versatile stand is suitable for various environments, enhancing presentations and making them more dynamic.
안전 정보
- Ensure all components are securely fastened before placing any equipment on the stand.
- 최대 적재 용량은 8.5kg(18.7lbs)을 초과하지 마십시오.
- 넘어지지 않도록 안정적이고 평평한 표면에 거치대를 놓으십시오.
- 조립 및 작동 중에는 어린이와 애완동물이 스탠드에 접근하지 못하도록 하십시오.
- Avoid sudden movements or impacts to the stand while equipment is in place.
- Regularly check for any loose parts or damage. Do not use if damaged.
패키지 내용
다음 품목이 모두 패키지에 포함되어 있는지 확인하세요.
- 1 x Iron Base Foot
- 1 x 베이스
- 1 x Support Rod
- 2 x 연장 막대
- 1 x Telescopic Rod
- 1 x 어댑터
- 2 x 클립
- 플라스틱 트레이 1개
- 1 x Foam Pad + Strap
- 1 x Ball Head Mount
- 1 x 드라이버
- 6 x M5*10mm Flat-Head Screws
- 1 x 사용자 매뉴얼(이 문서)
조립 설명서
Follow these steps to assemble your VEVOR Projector Stand:
- Attach the support rod to the base using the provided screws. Ensure it is firmly secured.
- Connect the extension rods to the support rod, then attach the telescopic rod.
- Mount the ball head to the top of the telescopic rod.
- Attach the plastic tray to the ball head. Secure it with the adapter and clips.
- Apply the foam pad to the tray surface and use the strap to secure your device.
작업
높이 조정
The stand's height is easily adjustable from 77 cm (30.3 inches) to 161 cm (63.4 inches). Loosen the adjustment knob on the telescopic rod, extend or retract the rod to the desired height, and then tighten the knob securely to lock it in place.
Adjusting Tray Angle and Rotation
The tray can be rotated 180 degrees and tilted to achieve the perfect viewing angle. Loosen the ball head mount to adjust the angle, then tighten to secure. The tray also features internal cable management for an organized setup.
Placing Devices
Place your projector, laptop, or other compatible devices on the tray. Use the included foam pad for cushioning and the strap to secure the device, preventing accidental slips. The stand is designed to support various devices for presentations, view읽는 것, 또는 읽기.
유지
- Clean the stand regularly with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- 모든 나사와 연결부를 주기적으로 점검하여 단단히 고정되어 있는지 확인하세요.
- Store the stand in a dry place when not in use. Its portable folding design allows for easy storage.
문제 해결
받침대가 불안정합니다.
- 스탠드를 완전히 평평하고 안정적인 표면에 놓으십시오.
- Verify that all screws, especially those connecting the base and rods, are fully tightened.
- Check that the weight of the device on the tray does not exceed the maximum load capacity of 8.5 kg (18.7 lbs).
- Distribute the weight evenly on the tray.
Height adjustment mechanism is loose:
- Ensure the adjustment knob on the telescopic rod is fully tightened after setting the desired height.
Tray does not hold position:
- Tighten the ball head mount securely after adjusting the tray angle.
명세서
| 모델 | 63.4 in Projector Floor Stand (ZG-TBTY) |
| 높이 범위 | 770-1610 mm / 27.56 - 63.39 inches |
| 제품 무게 | 3.6kg / 7.94파운드 |
| 제품 크기(L x W x H) | 300 x 400 x 1600mm / 11.81 x 15.75 x 62.99인치 |
| 중량 용량 | 8.5kg / 18.7파운드 |
| 트레이 소재 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| Tray Wall Thickness | 3mm (XNUMXmm) |
| Main Tray Size | 400 x 300 x 8mm / 15.75 x 11.81 x 0.31인치 |
| 기본 소재 | 철판 |
| 기본 크기 | 300 x 300mm / 11.81 x 11.81인치 |
| Base Wall Thickness | 4mm (XNUMXmm) |
| 색상 | 검은색 |
보증 및 지원
Information regarding warranty coverage for this product is not explicitly provided. For any support inquiries, missing parts, or technical assistance, please contact VEVOR customer service through their official web제품을 구매한 사이트 또는 소매업체.
Availability of spare parts for this product is currently not specified.
