RAINPOINT 4 Outlets Hose Timer Instruction Manual

1. 서론

The RAINPOINT 4 Outlets Hose Timer is an advanced irrigation controller designed to simplify your watering tasks. Featuring four individually programmable zones, it allows for customized watering schedules tailored to different areas of your garden or lawn. This timer supports automatic, timed, and manual watering modes, along with a convenient rain delay function to conserve water. Its robust, weatherproof construction ensures durability for outdoor use.

그림 1: 전면 view of the RAINPOINT 4 Outlets Hose Timer, showing the LCD display, control dial, and four hose outlets.

2. 안전 정보

• Ensure the timer is securely attached to the faucet to prevent accidental detachment or damage.
• Use only 4 AA alkaline batteries (not included). Do not mix old and new batteries, or different types of batteries.
• Replace batteries promptly when the low power indicator flashes to avoid interruption of watering schedules and automatic valve closure.
• Protect the timer from freezing temperatures by removing it from the faucet and draining all water before winter.
• Do not disassemble or attempt to repair the unit yourself. Refer to the troubleshooting section or contact customer support.
• Ensure all connections are tight to prevent leaks. Periodically check washers and replace if worn.

3. 제품 오버view

The RAINPOINT 4 Outlets Hose Timer features a user-friendly design with a large LCD display and intuitive controls.

주요 구성 요소:

• LCD 디스플레이: Large 3.3-inch screen for clear visibility of settings and current status.
• 컨트롤 다이얼 : Rotary dial for easy navigation between different programming modes (ON, OFF, Set Clock, Start Time, How Long, How Often).
• 버튼: OK/Manual, +/Delay, -, Zone buttons for precise adjustments and mode activation.
• 4개 콘센트: Individual outlets for connecting up to four hoses, allowing for independent zone control.
• 황동 입구: Durable brass water inlet for secure connection to the faucet.

Figure 2: Illustration of the 4 programmable outlets, highlighting that only one valve can be open at a time for optimal performance.

Figure 3: Close-up of the large LCD display and control dial, demonstrating the ease of programming.

4. 설정

4.1 배터리 설치

1. 타이머 뒷면에서 배터리 구획을 찾으세요.
2. 배터리 커버를 밀어서 엽니다.
3. 올바른 극성(+/-)을 확인하여 새로운 AA 알카라인 배터리 4개를 삽입합니다.
4. Close the battery cover securely to maintain its waterproof seal.

Figure 4: The waterproof battery cover, ensuring protection against outdoor elements.

4.2 수도꼭지 및 호스 연결

1. Screw the timer's brass inlet onto your 3/4-inch outdoor faucet. Hand-tighten firmly to prevent leaks.
2. Connect your garden hoses to the four individual outlets at the bottom of the timer. Ensure each connection is tight.
3. For added stability, especially with heavier hoses, utilize the reinforced column and consider securing the timer with a metal rod at the back (as shown in Figure 5).

Figure 5: The heavy-duty structure of the timer, illustrating secure mounting to a wooden post with a metal rod for stability.

5. 사용 설명서

The RAINPOINT 4 Outlets Hose Timer offers flexible programming options for automatic, manual, and rain delay watering.

5.1 시계 설정

타이머의 현재 시간을 설정하려면 다음 단계를 따르세요.

1. Turn the control dial to "SET CLOCK".
2. "+" 또는 "-" 버튼을 사용하여 시간을 조정하세요.
3. Press "OK/Manual" to confirm the hour and move to minutes.
4. "+" 또는 "-" 버튼을 사용하여 분을 조정하세요.
5. Press "OK/Manual" to confirm.
6. Turn the dial to "ON" to save the settings.

5.2 Setting Automatic Watering Schedule

You can program up to four independent watering zones. Each zone can have its own start time, duration, and frequency.

Figure 6: Visual representation of the flexible watering cycle modes, including start time, duration, and frequency settings.

1단계: 시작 시간 설정

1. Turn the control dial to "START TIME".
2. Use the "+" or "-" buttons to adjust the desired start hour. Press and hold for quick adjustment.
3. Press "OK/Manual" to confirm the hour and move to minutes.
4. "+" 또는 "-" 버튼을 사용하여 분을 조정하세요.
5. Press "OK/Manual" to confirm.
6. Press the "ZONE" button to switch to another zone (1-4) and repeat the process for each desired zone.

Step 2: Set How Long (Watering Duration)

1. Turn the control dial to "HOW LONG".
2. Use the "+" or "-" buttons to set the watering duration from 1 minute to 3 hours 59 minutes. Press and hold for quick adjustment.
3. Press "OK/Manual" to confirm.
4. Press the "ZONE" button to switch to another zone (1-4) and repeat the process.

Step 3: Set How Often (Watering Frequency)

1. Turn the control dial to "HOW OFTEN".
2. Use the "+" or "-" buttons to set the frequency: every 1-12 hours, or every 1-7 days.
3. Press "OK/Manual" to confirm.
4. Press the "ZONE" button to switch to another zone (1-4) and repeat the process.
5. Once all settings are complete, turn the control dial to "ON" to activate the automatic watering schedule.

5.3 수동 급수

The manual watering mode allows for immediate, unscheduled watering without affecting your programmed schedules.

1. Ensure the control dial is set to "ON".
2. Press and hold the "OK/Manual" button for 3 seconds until "MANUAL" appears on the screen.
3. Use the "ZONE" button to select the desired watering zone (1-4) or "BOTH" for all active zones.
4. Use the "+" or "-" buttons to set the manual watering duration (from 1 minute to 8 hours).
5. Press "OK/Manual" to confirm and start manual watering.
6. To stop manual watering, turn the dial to "OFF" or press "OK/Manual" again.

Figure 7: The manual watering feature in action, allowing for flexible, on-demand watering.

5.4 강우 지연 기능

The rain delay feature allows you to pause your watering schedule for a set period, preventing overwatering during rainy weather.

1. Ensure the control dial is set to "ON".
2. Press and hold the "+/DELAY" button for 3 seconds. The screen will show "DELAY" and the default delay time.
3. Use the "+" or "-" buttons to select the desired delay duration (24, 48, or 72 hours).
4. Press "OK/Manual" to confirm the rain delay. The timer will resume its schedule automatically after the delay period.
5. To cancel rain delay, press and hold "+/DELAY" again for 3 seconds.

Figure 8: The rain delay feature, offering options for 24, 48, or 72-hour pauses in watering.

6. 유지관리

6.1 필터 청소

A clogged filter can reduce water flow. Regular cleaning is recommended.

1. 수도꼭지에서 타이머를 나사로 풀어냅니다.
2. Locate the filter screen inside the brass inlet.
3. Carefully remove the filter screen.
4. Rinse the filter under running water to remove any debris. For stubborn clogs, use a small brush.
5. Reinsert the clean filter screen and reattach the timer to the faucet.

6.2 배터리 교체

When the low power indicator flashes on the display, it's time to replace the batteries. This ensures continuous operation and prevents unexpected valve closures.

1. 배터리 칸을 엽니다.
2. 오래된 배터리를 제거하세요.
3. Insert 4 new AA alkaline batteries, observing polarity.
4. 배터리 덮개를 단단히 닫으세요.

6.3 방한처리

To prevent damage from freezing temperatures, remove the timer from the faucet before the first frost.

• Disconnect the timer from the faucet and all hoses.
• Drain any remaining water from the timer.
• Store the timer indoors in a dry, frost-free location.

7. 문제 해결

일반적인 문제와 해결 방법은 아래 표를 참조하세요.

8. 사양

• 상표: 레인포인트
• 모델: Sky Blue 4 outlets (B0DLFJNJF8)
• 색상: 하늘색
• 제품 크기: 7인치 깊이 x 8인치 너비 x 4.5인치 높이
• 품목 무게: 2 파운드
• 설정 수: 8 (referring to programmable cycles)
• 화면 크기: 3.3 인치
• 수압: 최대 116 PSI
• 전원: AA 배터리 4개 (포함되지 않음)
• 물주기 시간: 1분 ~ 3시간 59분
• 물주기 빈도: 1~12시간마다 또는 1~7일마다

9. 보증 및 지원

RAINPOINT products are designed for durability and performance. For warranty information, technical support, or any inquiries regarding your sprinkler timer, please refer to the contact details provided in your product packaging or visit the official RAINPOINT web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.