소개
The Evenflo GoTime Sport Booster Car Seat is designed to provide safety, comfort, and convenience for your growing child. This manual provides essential information for proper installation, use, and maintenance of your booster seat. Please read all instructions carefully before using the product and keep this manual for future reference.
This booster seat is suitable for children weighing 40 to 120 lb, with a height of 44 to 57 inches, and a minimum age of 4 years.
중요한 안전 정보
경고: 이 지침을 따르지 않을 경우 자녀에게 심각한 부상이나 사망을 초래할 수 있습니다.
- 카시트에 아이를 앉힐 때는 항상 차량의 안전벨트(허리 벨트와 어깨 벨트)를 사용하여 아이를 안전하게 고정하십시오.
- Ensure the vehicle's shoulder belt is properly positioned across the center of your child's shoulder and chest, not on the neck or off the shoulder.
- The lap belt must be low on the hips, touching the child's thighs.
- 절대로 허리 벨트만으로 이 부스터 시트를 사용하지 마십시오.
- Do not use this booster seat if your child is under 4 years of age, weighs less than 40 lb, or is shorter than 44 inches.
- Do not use this booster seat if your child weighs more than 120 lb or is taller than 57 inches.
- 자녀를 부스터 시트에 혼자 두지 마십시오.
- Inspect the booster seat regularly for damage or wear. Discontinue use if damaged.
- Refer to your vehicle owner's manual for specific information regarding child restraint installation.
제품 특징
- 강화된 안전 설계: Features a deep design with overlapping head and body sides for added support and meets or exceeds all applicable federal safety standards.
- One-Hand Height Adjustment: Easily adjust the headrest to 7 different positions with one hand to ensure a proper fit for your growing child.
- 두 가지 사용 모드: Seamlessly transitions from a high-back booster to a backless booster to accommodate children as they grow.
- 일체형 컵홀더: Dual cup holders keep drinks and snacks conveniently within reach.
- 기계 세탁 가능 원단: The durable padded seat fabric is removable and machine-washable for easy cleaning.
구성 요소
The Evenflo GoTime Sport Booster Car Seat consists of the following main components:
- Booster Seat Backrest (High-Back)
- Booster Seat Base (with integrated cup holders)
- 어깨 벨트 포지셔닝 클립
그림 1: 전면 view of the assembled Evenflo GoTime Sport Booster Car Seat. This image shows the full high-back booster with its patterned fabric and dual cup holders.
그림 2: 후면 view of the Evenflo GoTime Sport Booster Car Seat, showing the plastic shell and adjustment mechanism.
설정 및 조립
High-Back Booster Assembly
- Align the backrest with the base. There are slots on the backrest that fit into corresponding pegs on the base.
- Push the backrest firmly down onto the base until it clicks securely into place. Ensure there is no gap between the backrest and the base.
- Verify the connection by gently pulling up on the backrest. It should not separate from the base.
Figure 3: The booster seat backrest detached from the base, illustrating the two main components for assembly or conversion to backless mode.
Backless Booster Conversion
To convert the high-back booster to a backless booster:
- Locate the release mechanism at the back or bottom of the backrest where it connects to the base.
- Follow the specific instructions in your product manual to disengage the backrest from the base. This typically involves squeezing tabs or lifting a lever.
- Once the backrest is removed, the base can be used as a backless booster. Ensure the shoulder belt positioning clip is accessible and used correctly with the backless booster.
작동 지침
Installing the Booster Seat in Your Vehicle
The Evenflo GoTime Sport Booster Car Seat is installed using your vehicle's lap and shoulder belt system. It does not use LATCH connectors.
- Place the booster seat firmly on the vehicle seat. Ensure it is positioned flat against the vehicle seat back.
- 아이를 부스터 시트에 앉히세요.
- Pull the vehicle's lap and shoulder belt around your child and the booster seat.
- Route the lap belt under the armrests of the booster seat and across your child's upper thighs, low on the hips.
- Route the shoulder belt through the shoulder belt guide on the booster seat's headrest (for high-back mode) or use the included shoulder belt positioning clip (for backless mode). The shoulder belt should lie flat across the center of your child's shoulder and chest.
- Buckle the vehicle's seat belt and pull the shoulder belt snug to remove any slack.
Figure 4: Proper routing of the vehicle's shoulder belt through the red belt guide on the booster seat's headrest. The belt should lie flat across the child's shoulder.
Adjusting Headrest Height
The headrest can be adjusted to 7 different positions to accommodate your child's growth.
- Locate the height adjustment handle at the top of the headrest.
- Squeeze the handle and simultaneously pull up or push down the headrest to the desired position.
- Release the handle to lock the headrest in place. Ensure it is securely locked before use.
Figure 5: The headrest of the booster seat can be easily adjusted upwards or downwards to fit the child's height, indicated by the multiple positions shown.
Using the Integrated Cup Holders
The booster seat features two integrated cup holders for convenience.
Figure 6: One of the two integrated cup holders, designed to hold beverages or small snacks, shown with a snack pouch inside.
유지
청소 지침
- Fabric Pad: The seat pad is removable and machine-washable. Wash on a gentle cycle with cold water and mild detergent. Tumble dry on low heat or hang to dry. Do not use bleach.
- 플라스틱 및 금속 부품: 광고로 닦아내세요amp cloth and mild soap. Air dry thoroughly. Do not use abrasive cleaners or solvents.
- 버클: Clean the buckle by wiping with a damp 천 소재입니다. 버클에 윤활유를 바르지 마십시오.
저장
When not in use, store the booster seat in a cool, dry place away from direct sunlight. Do not place heavy objects on top of the booster seat during storage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Booster seat feels loose or unstable in the vehicle. | Vehicle seat belt not tightened sufficiently; booster seat not properly seated on vehicle seat. | Ensure the booster seat is pushed firmly against the vehicle seat back. Pull the vehicle's lap and shoulder belt snug to remove all slack after buckling. Refer to "Installing the Booster Seat in Your Vehicle" section. |
| Shoulder belt does not fit correctly across child's shoulder. | Headrest height is incorrect; belt not routed through guide. | Adjust the headrest height so the shoulder belt lies flat across the center of your child's shoulder. Ensure the belt is routed through the red belt guide. |
| Backrest detaches from base during use. | Backrest not securely attached during assembly. | Re-assemble the backrest to the base, ensuring it clicks firmly into place. Verify the connection by gently pulling on the backrest. If it continues to detach, discontinue use and contact customer support. |
| Fabric pad is difficult to remove or reattach. | Incorrect removal/attachment procedure. | Refer to the detailed instructions in your full product manual for fabric removal and reattachment. Ensure all elastic loops and tabs are correctly positioned. |
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 제품 치수 | 17.5 x 13.25 x 19.75 인치 |
| 품목 무게 | 6파운드 |
| 최소 아동 체중 | 40 파운드 |
| 최대 아동 체중 | 120 파운드 |
| 최소 아동 키 | 44 인치 |
| 최대 아동 키 | 57 인치 |
| 재료 유형 | Polyester, Polypropylene, Cotton |
| 리클라이닝 위치 수 | 7 (for headrest height adjustment) |
| 정위 | 앞으로 향함 |
| 설치 유형 | 안전벨트 |
| 색상 | 하늘색 |
보증 및 지원
For detailed warranty information and customer support, please refer to the official Evenflo website or the documentation included with your purchase. Evenflo offers ParentLink® customer service experts who can provide live video support with certified car seat safety technicians for assistance with proper vehicle installation.
You can visit the official Evenflo web자세한 내용은 사이트: www.evenflo.com
