ZEBRONICS MLS755 라인 인터랙티브 UPS 시스템 사용 설명서

1. 서론

The ZEBRONICS MLS755 is a Line Interactive Uninterruptible Power Supply (UPS) system designed to provide reliable power backup and protection for various electronic devices. This UPS is specifically engineered to support micro-load applications such as WiFi routers, surveillance systems, PoE switches, smart home hubs, VoIP phones, and small NAS devices. It features advanced microcontroller-based control, a wide input voltage range, and a 3-tier battery management system to ensure stable performance and extended battery life.

2. 안전 지침

Please read and follow these safety instructions carefully before installing or operating the UPS. Retain this manual for future reference.

• UPS c를 열지 마십시오.asing. 내부에는 사용자가 직접 수리할 수 있는 부품이 없습니다. 모든 수리는 자격을 갖춘 서비스 담당자에게 맡기십시오.
• 무정전 전원 공급 장치(UPS)를 직사광선이 비치는 곳, 열원 근처, 또는 먼지, 습기, 부식성 물질이 과도한 환경에 설치하지 마십시오.
• UPS 주변의 환기가 잘 되도록 하세요. 환기구를 막지 마세요.
• UPS는 접지된 AC 전원 콘센트에만 연결하십시오.
• 레이저 프린터나 히터와 같이 UPS에 과부하를 줄 수 있는 가전제품은 연결하지 마십시오.
• 비상시 전원 버튼을 눌러 UPS를 끄고 AC 전원 공급 장치에서 분리하십시오.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• ZEBRONICS MLS755 UPS Unit
• 사용자 설명서
• 전원 케이블(포함된 경우)

4. 제품 오버view

The ZEBRONICS MLS755 UPS provides essential power protection and backup. Familiarize yourself with its components.

전면 패널

This image displays the front of the ZEBRONICS MLS755 UPS unit. It features a power button centrally located, surrounded by a red indicator light. Above the power button are three smaller indicator lights: red, yellow, and green, which signify different operational statuses. The Zebronics logo is visible at the bottom front.

• 전원 버튼: 무정전 전원 공급 장치(UPS)를 켜거나 끄는 데 사용됩니다.
• LED 표시등: Display the operational status of the UPS (e.g., AC mode, battery mode, fault, overload).

Rear Panel and Connectivity

This image shows the rear panel of the ZEBRONICS MLS755 UPS, highlighting its connectivity ports and a label with key specifications. The specifications listed include Nominal Voltage (220-240 VAC), Voltage Range (140-300 VAC), Frequency (50/60 Hz), Plug Type (3 Pin Plug), and Input Protection (Internal Fuse). The rear panel features multiple output sockets for connecting devices and an input power cord.

• AC 입력: 무정전 전원 공급 장치를 주 전원 공급 장치에 연결합니다.
• 출력 소켓: Provide power backup and surge protection for connected devices.

Key Features Visualized

This image illustrates the ZEBRONICS MLS755 UPS in an office setting, with a computer monitor and keyboard visible. The text overlay highlights "LED & Audible Alarms," indicating that the UPS provides visual and sound notifications for status changes or issues.

This image depicts the ZEBRONICS MLS755 UPS with two large green arrows forming a circular motion around it, symbolizing its "Auto restart while AC is recovering" feature. This indicates the UPS automatically resumes operation when main power is restored.

This image shows the ZEBRONICS MLS755 UPS with a graphic representation of electrical energy, illustrating the "Automatic Voltage Regulation (AVR)" feature. This function ensures a stable output voltage to connected devices, protecting them from power fluctuations.

This image presents a grid of nine blue squares, each highlighting a key feature of the ZEBRONICS MLS755 UPS. These features include: Line Interactive UPS, Micro-controller Based, Sleep Mode Charging, Cold Start, Generator Compatible, Boost & Buck AVR, Double Boost, Overload Protection, and Simulated Sine Wave.

제품 치수

이 이미지는 차원을 제공합니다. view of the ZEBRONICS MLS755 UPS. The measurements indicated are 14.2 cm (height), 28 cm (depth), and 10.1 cm (width). These dimensions help users understand the physical size of the unit for placement considerations.

5. 설정

Follow these steps for initial setup of your UPS:

1. 짐 풀기: UPS를 포장에서 조심스럽게 꺼내세요. 배송 중 손상된 부분이 있는지 확인하세요.
2. 놓기: Place the UPS on a flat, stable surface in a well-ventilated area, away from direct sunlight, heat, and moisture. Ensure adequate space around the unit for airflow.
3. 초기 충전: Connect the UPS to a standard grounded AC power outlet. Allow the UPS to charge for at least 6-8 hours before connecting any devices to ensure optimal battery performance. The UPS will charge whether it is turned on or off.
4. 연결 장치: After initial charging, connect your devices (e.g., WiFi router, desktop PC, monitor) to the output sockets on the rear panel of the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's capacity (600VA / 360W).
5. 전원 켜기: Press the power button on the front panel to turn on the UPS. The LED indicators will illuminate to show its status.

6. 사용 설명서

Understanding the operation of your ZEBRONICS MLS755 UPS.

켜기/끄기

• 켜려면: Press and hold the power button for approximately 2 seconds until the UPS beeps and the indicators light up.
• 끄기: Press and hold the power button for approximately 2 seconds until the UPS beeps and the indicators turn off.

LED Indicators and Audible Alarms

The UPS provides visual and audible alerts to communicate its status:

• 녹색 LED : Indicates AC mode (normal operation, power supplied from utility).
• 노란색 LED: Indicates battery mode (power supplied from UPS battery during an outag이자형).
• 적색 LED : Indicates a fault, overload, or low battery condition. Refer to the troubleshooting section for details.
• 가청 경보: Various beeping patterns indicate different events such as power failure, low battery, or overload.

자동 볼륨tage 규정(AVR)

The MLS755 features AVR with double boost and buck functionality. This automatically corrects minor power fluctuations (sags and surges) without switching to battery power, thereby extending battery life and providing stable power to your devices.

자동 재시작 기능

When AC power is restored after a power outage, the UPS will automatically restart and resume normal operation, ensuring continuous protection for your connected devices.

Micro Load Support

This UPS is optimized for micro-load devices, ensuring that even low-power equipment like WiFi routers receive stable and continuous power during outages. The ZEB Micro Load Sense System ensures consistent performance across a wide input voltag전자 범위.

7. 유지관리

적절한 유지 관리는 UPS의 수명 연장과 최적의 성능을 보장합니다.

• 배터리 관리: The MLS755 incorporates an advanced 3-tier battery management system that optimizes charging and discharging cycles, extending battery life by over 30%.
• 일반 충전: To maintain battery health, keep the UPS connected to AC power at all times. If the UPS is stored for an extended period, recharge it every three months for at least 6-8 hours.
• 청소: UPS 외부를 주기적으로 부드럽고 마른 천으로 닦아주십시오. 액체 또는 에어로졸 세척제는 사용하지 마십시오. 통풍구에 먼지와 이물질이 없는지 확인하십시오.
• 배터리 교체: Batteries are consumable items. When the battery capacity significantly decreases, it may need replacement. Contact authorized service personnel for battery replacement.

8. 문제 해결

무정전 전원 공급 장치(UPS)에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

If the problem persists after attempting these solutions, please contact ZEBRONICS customer support.

9. 사양

Detailed technical specifications for the ZEBRONICS MLS755 UPS System:

10. 보증 및 지원

ZEBRONICS products are manufactured under strict quality standards. This product is covered by a limited warranty from the date of purchase. Please retain your purchase receipt as proof of purchase.

For warranty claims, technical support, or service inquiries, please contact ZEBRONICS customer service. You can find contact information on the official ZEBRONICS web사이트 또는 지역 소매점을 통해 구매하세요.

제조업체: Zebronics India Private Limited
주소: No.13/7, Smith Road, Royapettah, Chennai - 600 002