La-Z-Boy Sonata CCHR10014E

La-Z-Boy Sonata Executive Mid-Back Office Chair Instruction Manual

Model: Sonata CCHR10014E

1. 제품 오버view

The La-Z-Boy Sonata Executive Mid-Back Office Chair is designed for comfort and style in your workspace. It features a button-tufted seat and back, double-layer cushioning, padded armrests, and an ergonomic design for extended use. The chair is built with a swivel metal base and durable bonded leather upholstery.

La-Z-Boy Sonata Executive Mid-Back Office Chair

Image 1.1: La-Z-Boy Sonata Executive Mid-Back Office Chair, Dark Brown/Chrome.

This chair combines modern sophistication with luxurious comfort, featuring gentle curves and timeless button-tufting. The double-stitching provides a tailored finish, complemented by industrial-inspired arms and a polished chrome base.

2. 안전 정보

  • Always follow assembly instructions carefully to prevent injury.
  • 최대 중량 용량은 275파운드(125kg)를 초과하지 마십시오.
  • 사용 전에 모든 볼트와 나사가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조이십시오.
  • 조립하는 동안 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하세요.
  • 의자가 넘어지지 않도록 평평한 곳에서 사용하십시오.
  • 의자 위에 서거나 의자를 발판으로 사용하지 마십시오.

3. 패키지 내용

Before beginning assembly, ensure all components are present. The package should include:

  • 의자 등받이
  • 시트 쿠션 어셈블리
  • 팔걸이(좌우)
  • 의자 받침대 (별 모양 받침대)
  • 캐스터(5개)
  • 가스 리프트 실린더
  • 메커니즘 플레이트
  • 하드웨어 키트(나사, 와셔, 육각 렌치)

부품이 누락되었거나 손상된 경우 고객 지원팀에 문의하세요.

4. 조립 설명서

Assembly is designed to be simple and quick. A hardware kit is included with all necessary tools.

  1. 바닥에 캐스터 부착: 의자 받침대 다리 끝에 있는 구멍에 바퀴 다섯 개를 각각 끼워 넣으세요. 딸깍 소리가 나면서 제자리에 고정될 때까지 세게 밀어 넣으세요.
  2. 가스 리프트 삽입: 가스 리프트 실린더를 의자 받침대의 중앙 구멍에 놓습니다.
  3. 좌석에 메커니즘 플레이트 부착: 메커니즘 플레이트를 시트 쿠션 밑면에 미리 뚫린 구멍에 맞춰 정렬합니다. 제공된 나사와 육각 렌치를 사용하여 고정합니다. 메커니즘의 앞면이 시트 앞쪽을 향하도록 하십시오.
  4. 좌석에 팔걸이 부착: Secure the armrests to the sides of the seat cushion using the provided screws. Do not fully tighten yet.
  5. 등받이를 좌석/팔걸이에 부착: Align the backrest with the seat and armrests. Secure the backrest to the seat and armrests using the remaining screws. Once all screws are in place, fully tighten all armrest and backrest screws.
  6. 시트 어셈블리를 가스 리프트에 연결하십시오: Carefully place the assembled seat onto the gas lift cylinder, ensuring the tapered end of the gas lift fits securely into the mechanism plate.
바퀴와 가스 리프트가 장착된 의자 받침대

Image 4.1: Illustration of the sturdy metal base with 360° swivel casters, meeting ANSI/BIFMA X5.1 requirements.

For detailed visual instructions, refer to the included assembly guide in your package.

5. 사용 설명서

5.1 높이 조정

To adjust the chair's height, locate the accent fingertip control lever on the right side of the seat.

  • 좌석을 올리려면: While seated, lift the lever upwards. Stand up slightly to allow the chair to rise. Release the lever at the desired height.
  • 좌석을 낮추려면: While seated, lift the lever upwards. Apply weight to the seat to lower it. Release the lever at the desired height.
의자 높이 조절 메커니즘

Image 5.1: Illustration of the height customization lever on the right side of the chair.

5.2 Tilt and Recline Function

The chair features a recline function and tilt-lock mechanism for personalized comfort.

  • 리클라이닝: Locate the lever on the left side of the seat. Flip this lever upwards to unlock the recline function. Lean back to recline.
  • 기울기를 고정하려면: Flip the left lever downwards to lock the chair in an upright position.
  • 기울기 장력을 조정하려면: A round knob is located underneath the seat, typically at the front. Twist this knob clockwise to increase tilt tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
Chair recline and tilt tension controls

Image 5.2: Illustration of the recline lever and tilt tension knob for personalized fit.

5.3 Mobility and Swivel

The chair is equipped with 360-degree smooth-rolling dual casters, allowing for easy movement across various floor surfaces, including most carpets. The sturdy metal base also provides full 360-degree swivel capability.

Chair casters and armrests

Image 5.3: Detail of the elegant sloped armrests and 360° swivel casters for enhanced mobility.

6. 관리 및 유지 보수

Proper care will extend the life and appearance of your La-Z-Boy Sonata Executive Office Chair.

  • Cleaning Bonded Leather: The bonded leather upholstery is designed to be easy to care for. Wipe spills immediately with a clean, dry cloth. For general cleaning, use a soft, damp 순한 비누와 물을 묻힌 천으로 닦아주세요. 강한 화학 약품이나 연마성 세제는 소재를 손상시킬 수 있으므로 사용하지 마세요.
  • 프레임 및 베이스: Wipe the metal frame and base with a soft, damp 물 얼룩이 생기지 않도록 천으로 닦아 완전히 말리십시오.
  • 캐스터 : Periodically check casters for hair or debris that may impede smooth rolling. Clean as needed.
  • 패스너: Regularly check all screws and bolts to ensure they remain tight. Re-tighten any loose fasteners to maintain stability and safety.
  • 직사광선을 피하세요: 장시간 직사광선에 노출되면 인조 가죽의 색이 바래거나 갈라질 수 있습니다. 가능하면 의자를 직사광선을 피해 배치하십시오.

7. 문제 해결

이 섹션에서는 사무용 의자를 사용할 때 발생할 수 있는 일반적인 문제에 대해 다룹니다.

문제가능한 원인해결책
의자는 높이 조절이 되지 않습니다.가스 리프트가 작동하지 않거나 고장났습니다.Ensure the height adjustment lever is fully lifted. If issue persists, contact customer support.
의자가 흔들리거나 불안정하게 느껴집니다느슨한 잠금장치나 고르지 않은 바닥.조립 나사를 모두 확인하고 조여주세요. 의자가 평평하고 수평인 표면에 놓여 있는지 확인하세요.
바퀴가 부드럽게 굴러가지 않습니다바퀴에 이물질이 있거나 바퀴가 손상되었습니다.Inspect casters for hair, dust, or other obstructions and remove them. If damaged, contact customer support for replacements.
Chair does not reclineTilt-lock engaged or tilt tension too high.Ensure the recline lever is flipped upwards to unlock. Adjust the tilt tension knob counter-clockwise to loosen.

여기에 나열되지 않은 문제가 발생하거나 제시된 해결 방법으로 문제가 해결되지 않으면 고객 지원팀에 문의하십시오.

8. 제품 사양

특징세부 사항
상표라지보이
모델명소나타
품목 모델 번호CCHR10014E
제품 크기(D x W x H)31.5인치 깊이 x 27인치 너비 x 41.5인치 높이
최대 중량 권장 사항275파운드(125kg)
재료Bonded Leather (Faux Leather), Foam Fill
색상Dark Brown and Chrome
백 스타일터프티드 백
팔 스타일패딩
포함된 구성 요소캐스터
품목 무게37.6파운드(17.05kg)
한국어:887909220407
La-Z-Boy Sonata Chair Product Dimensions

Image 8.1: Detailed product dimensions including width, depth, back height, seat depth, chair height, and seat height range.

9. 보증 및 고객 지원

La-Z-Boy is committed to providing quality products and support.

9.1 고객 지원

For assistance with assembly, missing parts, or any product-related inquiries, please contact our dedicated U.S.-based customer support team.

헤드셋을 착용한 고객 서비스 담당자

Image 9.1: Our customer service team is ready to assist you.

9.2 보증 정보

Specific warranty details are typically included with your product documentation. Please refer to the warranty card or contact customer support for comprehensive information regarding coverage and terms.

관련 문서 - Sonata CCHR10014E

사전view 라지보이 매니저 체어: 사용 및 관리, 조립 및 보증 안내
La-Z-Boy 매니저 의자의 조립, 작동, 유지 관리 및 제한적 보증 정보를 포함한 자세한 설명서입니다. 다국어 지원이 제공됩니다.
사전view 라지보이 이그제큐티브 체어 44940 조립 및 작동 설명서
라지보이 임원용 의자(모델 44940)의 조립, 작동 및 보증에 대한 종합 안내서입니다. 의자를 조립하고, 조정하고, 관리하는 방법을 알아보세요.
사전view LA-Z-BOY 매니저 의자: 조립, 사용, 관리 및 보증 안내서
LA-Z-BOY 매니저 체어(모델 52460)에 대한 종합 안내서로, 자세한 조립 설명, 사용 및 관리 지침, 제한적 보증 정보가 포함되어 있습니다.
사전view La-Z-Boy 공기 수집기 사용 설명서: 설치, 기능 및 안전 수칙
Komflex 사의 La-Z-Boy Air Collection 인체공학 의자에 대한 종합 사용자 설명서입니다. 조립 방법, 등받이 조절, 마사지, 온열 및 메모리 기능을 위한 핸드 컨트롤러의 자세한 작동법, 그리고 필수 안전 지침이 포함되어 있습니다.
사전view LA-Z-BOY Manager Chair: Use and Care Instructions
User manual and care guide for the LA-Z-BOY Manager Chair (Model #52453), including assembly steps, operating instructions, and limited warranty details.
사전view 라지보이 리클라이닝 가구: 작동 및 조립 설명서
이 사용 설명서는 안전 지침, 기능 작동법 및 관리 요령을 포함하여 La-Z-Boy 리클라이닝 가구의 작동 및 조립에 대한 포괄적인 지침을 제공합니다.