Mesqool CR1025 Alarm Clock Radio with Bluetooth Speaker and FM Radio

제품 끝view

The Mesqool CR1025 is a versatile alarm clock radio designed to provide multiple functionalities in a compact form factor. It integrates an alarm clock, Bluetooth speaker, FM radio, LED night light, and dual USB charging ports for convenience.

그림 1: 전면 view of the Mesqool CR1025 Alarm Clock Radio, displaying the digital time and control layout.

Figure 2: Key features of the Mesqool CR1025, highlighting its multi-functional design.

설치 가이드

1. 전원 연결

• 제공된 전원 어댑터를 알람시계 뒷면의 DC IN 포트에 연결하십시오.
• Plug the adapter into a standard electrical outlet. The clock will power on and the display will illuminate.

Figure 3: The alarm clock radio connected to power, ready for use.

2. 배터리 백업 설치

• The unit includes a CR2032 lithium battery for backup. This battery retains alarm settings and time during a power outage, but the display will not show the time and the alarm will not sound until power is restored.
• 장치 하단에서 배터리 칸을 찾으세요.
• Insert the CR2032 battery with the correct polarity (+ side up).
• 배터리 칸을 단단히 닫으세요.

3. 초기 시간 설정

1. 를 누르세요 시간 12/24 단추. 시간 숫자가 깜박입니다.
2. 회전하다 주사 knob (right knob) to adjust the hour.
3. 를 누르세요 시간 12/24 버튼을 다시 누르세요. 분 숫자가 깜빡입니다.
4. 회전하다 주사 분을 조정하는 손잡이.
5. 를 누르세요 시간 12/24 button once more to confirm and exit time setting.

4. 12/24 시간 형식

• To switch between 12-hour and 24-hour time formats, press and hold the 시간 12/24 버튼을 2초간 누르세요.
• In 12-hour format, 'AM' or 'PM' indicators will appear on the display.

Figure 4: Display options for 12-hour and 24-hour time formats.

5. Daylight Saving Time (DST) Mode

• To activate or deactivate Daylight Saving Time, press and hold the Dimmer DST 버튼을 2초간 누르세요.
• The time will adjust by one hour forward or backward, and the 'DST' indicator will appear or disappear.

작동 지침

1. 알람 설정

1. 를 누르고 계세요 경보 버튼을 2초 동안 누르세요. 시 숫자가 깜빡입니다.
2. 회전하다 볼륨 -/+ knob (left knob) to adjust the alarm hour.
3. 를 누르세요 경보 버튼을 다시 누르세요. 분 숫자가 깜빡입니다.
4. 회전하다 볼륨 -/+ knob to adjust the alarm minute.
5. 를 누르세요 경보 button again. The alarm source icon will flash. Rotate the 볼륨 -/+ knob to select between buzzer or FM radio as the alarm sound.
6. 를 누르세요 경보 button again. The volume level will flash. Rotate the 볼륨 -/+ knob to adjust the alarm volume (L01-L16).
7. 를 누르세요 경보 button once more to confirm and activate the alarm. The alarm icon will appear on the display.

알람 취소

• To cancel the alarm, press the 경보 button. The alarm icon will turn off, indicating the alarm has been deactivated.

스누즈 기능

• 알람이 울리면 버튼을 누르세요. 스누즈 / 라이트 버튼을 눌러 스누즈 기능을 활성화하세요. 알람은 9분간 멈췄다가 다시 울립니다.
• This can be repeated up to 9 times. To stop the alarm for the day, press the 경보 단추.

Figure 5: The alarm clock radio offers two alarm sound options: radio or buzzer.

2. 블루투스 스피커 작동

1. 를 누르세요 전원 모드 button repeatedly until 'bt' appears on the display and the Bluetooth icon starts flashing. This indicates the clock is in Bluetooth pairing mode.
2. On your mobile device, enable Bluetooth and search for available devices. Select 'CR1025' from the list.
3. Once connected, the Bluetooth icon on the clock's display will stop flashing and remain solid. You can now play audio from your device through the clock's speaker.

Figure 6: Bluetooth 5.0 connectivity for wireless audio streaming.

3. FM 라디오 작동

1. 를 누르세요 전원 모드 button repeatedly until the radio icon lights up on the display, indicating FM radio mode.
2. 자동 스캔: 를 누르세요 주사 button to automatically search for and store up to 20 FM radio stations. The clock will cycle through frequencies and save strong signals as presets (P01, P02, etc.).
3. 수동 검색: 회전하다 주사 knob to manually browse FM frequencies.
4. 사전 설정 저장 : To save a manually found station, press and hold the Preset Pair button for 2 seconds. The preset number will flash. Rotate the 주사 knob to select a preset slot, then press Preset Pair 다시 저장합니다.
5. 프리셋 불러오기: FM 모드에서 짧게 누르세요 Preset Pair 저장된 역들을 순환하며 볼 수 있는 버튼입니다.
6. 볼륨 조절: 회전하다 볼륨 -/+ knob to adjust the radio volume (16 levels).

Figure 7: Enjoying FM radio with a wide frequency range and 20 presets.

4. Night Light and Brightness Dimmer

• The clock features a built-in LED night light.
• 를 누르세요 스누즈 / 라이트 button to cycle through 5 adjustable brightness levels for the main display and the night light.
• The lowest setting is suitable for sleeping, while the brightest is for daytime visibility.

Figure 8: The 5-level brightness dimmer allows customization for various lighting conditions.

5. Phone Charging Ports

• The Mesqool CR1025 is equipped with two USB charging ports: one USB-C and one USB-A.
• Connect your devices (e.g., smartphone, smartwatch) to these ports using appropriate charging cables.
• The clock must be powered via its AC adapter for the charging ports to function.

Figure 9: Dual USB charging ports for convenient device power.

6. Sleep Timer Setting

• When using the FM radio or Bluetooth speaker, you can set a sleep timer to automatically turn off playback after a set duration.
• 를 누르세요 슬립 타이머 button (left knob) to access the settings.
• 회전하다 슬립 타이머 knob to select the desired duration: 15, 30, 60, 90, or 120 minutes, or OFF.
• The display will show the selected duration, and then return to the current time. The music/radio will play for the set time and then automatically turn off.

교육 비디오

유지

• 청소: 알람시계 표면을 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세제나 연마성 재료는 사용하지 마십시오.
• 배터리 교체: If the battery backup is no longer retaining settings during power outages, replace the CR2032 battery in the compartment on the bottom of the unit. Ensure correct polarity.
• 저장: 장기간 보관할 경우 전원을 차단하고 백업 배터리를 제거하십시오.

문제 해결

• 전원/디스플레이 꺼짐: Ensure the power adapter is securely connected to both the clock and a working electrical outlet. Check if the outlet has power.
• 알람이 울리지 않음: Verify that the alarm is set correctly (time, source, volume) and that the alarm icon is visible on the display. Ensure the alarm volume is not set to L00.
• FM 라디오 수신 불량: Extend the FM antenna fully. Try repositioning the clock to improve signal reception. Perform an auto-scan to find stronger stations.
• 블루투스가 연결되지 않음: Ensure the clock is in Bluetooth pairing mode (flashing 'bt' icon). Make sure your device's Bluetooth is enabled and within range. Forget the device on your phone and try pairing again.
• USB 충전이 작동하지 않습니다. Confirm the clock is connected to AC power. Check if the charging cable is functional and properly connected to both the clock and your device.
• 화면 밝기가 너무 밝거나 어둡습니다. 를 누르세요 스누즈 / 라이트 밝기 수준을 조절하는 버튼입니다.

명세서

보증 및 지원

For warranty information, technical support, or further assistance, please refer to the contact details provided with your product packaging or visit the official Mesqool web대지.