1. 서론
Thank you for choosing the OFFNOVA Hat Heat Press Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heat press. Designed for both sublimation and HTV iron-on projects, this machine offers precise temperature and time control, ensuring consistent and professional results for various cap styles.
Figure 1.1: OFFNOVA Hat Heat Press Machine (Handle-Blue) with example hats.
주요 특징:
- Rapid & Even Heating: One-piece cast aluminum heating plate with Teflon coating for uniform heat distribution up to 400°F (204°C).
- Easy & Stable Operation: Ergonomic handle and four-bar linkage system, combined with anti-slip silicone suction cups for stability.
- Dual Cap Platens: Includes 2 interchangeable hat bases with different curvatures to fit 99% of cap styles, plus a built-in hat stretcher.
- Adjustable Pressure Control: Easy-to-turn pressure knob for fine-tuning pressing force.
- Smart Auto Countdown: Automatic timing initiation upon handle pull-down and audible alert upon completion.
2. Components and Setup
2.1 풀기 및 검사
Carefully remove all components from the packaging. Inspect the machine for any signs of damage during transit. Retain the original packaging for future storage or shipping.
2.2 구성 요소 식별
Familiarize yourself with the main parts of your heat press machine:
- Heating Platen (Upper)
- Lower Platen (Interchangeable)
- Control Panel (Digital Display, Temp/Time Buttons)
- 압력 조절 노브
- 작동 핸들
- 전원 스위치
- 전원 코드 인렛
Figure 2.1: Machine dimensions and interchangeable platens (4x3 inch and 5.5x3.7 inch).
2.3 초기 설정
- Place the heat press on a stable, heat-resistant surface. Ensure adequate ventilation around the machine.
- Connect the power cord to the machine's power inlet and then to a grounded electrical outlet (AC110V/60Hz).
- 전원을 연결하기 전에 전원 스위치가 OFF 위치에 있는지 확인하세요.
- Select and install the appropriate lower platen for your cap size. The machine comes with two interchangeable platens to accommodate various cap styles.
3. 사용 설명서
3.1 제어판 이상view
Figure 3.1: Digital Control Panel for Temperature and Time.
- 디지털 디스플레이: Shows current temperature and set time.
- 온도 조절: Adjustable from 0-400°F (0-204°C).
- 시간 제어: Adjustable from 0-999 seconds.
- 힘: 500와트.
- 권tage: AC110V/60Hz.
- Time Up Alarm: Alerts when the set time is complete.
- 자동 카운트다운: Initiates automatically when the handle is pressed down.
3.2 압력 조절
The pressure adjustment knob, located on top of the heating platen, allows you to fine-tune the pressing force. Turn clockwise to increase pressure and counter-clockwise to decrease pressure. Adjust based on the thickness of the cap and transfer material for optimal results.
3.3 단계별 작동 방법
Figure 3.2: Four-step operation guide.
- Prepare the Hat: Place your hat on the lower platen. Adjust the pressure knob as needed to ensure a snug fit and even contact.
- 온도 및 시간 설정: Turn on the power switch. Use the control panel to set your desired temperature and time according to your transfer material's specifications. The machine will begin to heat up.
- Initiate Pressing: Once the machine reaches the set temperature, place your transfer design on the hat. Pull the operating handle down firmly to engage the heating platen. The automatic countdown will begin.
- Complete Transfer: When the set time expires, an alarm will sound. Release the handle and carefully remove the hat. Allow the transfer to cool if required by the material's instructions.
Figure 3.3: Machine in use, demonstrating versatile application.
4. 유지관리
4.1 청소
- 청소하기 전에는 항상 기계의 플러그를 뽑고 완전히 식히십시오.
- Wipe the Teflon-coated heating platen with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as they can damage the coating.
- Clean the lower platen and exterior surfaces with a damp 옷감.
- Ensure no liquids enter the control panel or electrical components.
4.2 보관
Store the heat press in a dry, dust-free environment. If possible, use the original packaging for protection. Keep out of reach of children.
5. 문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제를 다룹니다. 여기에 나열되지 않은 문제는 고객 지원팀에 문의하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기계의 전원이 켜지지 않습니다. | 전원 코드가 연결되어 있지 않음; 전원 스위치가 꺼져 있음; 콘센트 문제. | Ensure power cord is securely plugged in. Turn power switch ON. Test outlet with another device. |
| 온도가 설정값에 도달하지 않습니다. | Incorrect temperature setting; Heating element issue. | Verify temperature setting. Allow sufficient time for preheating. If issue persists, contact support. |
| Uneven heat transfer or poor adhesion. | Uneven pressure; Incorrect temperature/time; Material not suitable. | Adjust pressure knob for even contact. Verify temperature and time settings for your material. Ensure material is compatible with heat pressing. |
| Automatic countdown not starting. | Handle not fully pressed down. | Ensure the operating handle is fully depressed to activate the sensor for the automatic countdown. |
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | HPM-H0 |
| 상표 | 오프노바 |
| 상한 온도 등급 | 화씨 400도(섭씨 204도) |
| 힘 | 500와트 |
| 권tage | 교류110V/60Hz |
| 제품 치수 | 12.6인치 길이 x 6.7인치 너비 x 13.6인치 높이 |
| 품목 무게 | 15.57파운드 |
| 재료 | 알류미늄 |
| 추천 용도 | 모자, 모자 |
7. 보증 정보
The OFFNOVA Hat Heat Press Machine (Model HPM-H0) comes with a 1년 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생한 제조상의 결함 및 고장에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official OFFNOVA web대지.
8. 고객 지원
If you have any questions, require technical assistance, or need to report an issue with your OFFNOVA Hat Heat Press Machine, please contact our customer support team.
Please have your model number (HPM-H0) and purchase information ready when contacting support to expedite assistance.
더 자세한 정보와 자료를 원하시면 다음 웹사이트를 방문하세요. OFFNOVA Store on Amazon.
