LEDVANCE Flash Car Emergency Light User Manual

1. 제품 오버view

The LEDVANCE Flash Car Emergency Light is a versatile mobile lighting device designed for outdoor use, particularly in emergency situations. It features a robust aluminum housing and integrates essential tools for roadside safety.

Key features include a glass hammer for breaking windows and a seat belt knife for cutting seat belts, enhancing its utility in critical moments. The light offers multiple operating modes for various lighting needs.

This product is classified as a surrounding product, meaning its included light source(s) can be disassembled for separate verification. The light source within this device is of energy efficiency class G.

Image: The LEDVANCE Flash Car Emergency Light, a compact, black, cylindrical device with a light at one end and a textured grip, designed for emergency use.

2. 안전 정보

• 배터리 안전: Use only the specified battery type (4 AAA batteries). Do not mix old and new batteries, or different types of batteries. Ensure correct polarity when inserting batteries. Remove batteries if the device will not be used for an extended period.
• 비상 도구: The glass hammer and seat belt knife are sharp and designed for emergency use only. Handle with extreme care to prevent injury. Keep out of reach of children.
• 빛의 출처: Do not look directly into the light beam, as it may cause temporary vision impairment.
• 환경 조건: This device is designed for outdoor use but should not be submerged in water. Avoid extreme temperatures.

3. 패키지 내용

다음 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 x LEDVANCE Flash Car Emergency Light (Model: FLASHL CAR BTRY EM FS1 LEDV)

4. 설정

4.1 배터리 설치

1. Locate the battery compartment. This is typically found by twisting or unscrewing a section of the light's body.
2. Insert 4 AAA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
3. 배터리 칸을 단단히 닫으세요.

5. 사용 설명서

5.1 스위칭 모드

The LEDVANCE Flash Car Emergency Light features a convenient button for switching between its four operating modes:

• 첫 번째 보도: Activates bright light mode (100 lumens).
• 두 번째 누르기: Switches to soft light mode (70 lumens).
• 세 번째 누르기: Activates SOS mode (Morse code for SOS).
• 네 번째 보도: Activates flashing mode.
• Subsequent presses will cycle through the modes or turn the light off, depending on the model's specific sequence.

5.2 Adjusting Light Beam Angle

The angle of the light beam can be adjusted by turning the lens of the device. Rotate the lens clockwise or counter-clockwise to achieve the desired focus or spread of light.

5.3 배터리 수명

The light provides approximately 1.5 hours of operation at full brightness (100 lumens) with fresh batteries.

6. 유지관리

• 청소: 부드러운 천으로 장치를 닦으십시오. damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 배터리 교체: Replace all 4 AAA batteries when the light output diminishes or the device stops functioning. Refer to Section 4.1 for battery installation.
• 저장: Store the light in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

7. 문제 해결

• 표시등이 켜지지 않음:
  • 배터리가 극성에 맞게 올바르게 삽입되었는지 확인하십시오.
  • 오래되었거나 소모된 배터리는 새 배터리로 교체하세요.
  • 배터리함이 단단히 닫혀 있는지 확인하십시오.
• 빛이 어둡거나 깜빡거립니다.
  • 배터리가 부족할 수 있습니다. 새 배터리로 교체하세요.

8. 사양

9. 보증 및 지원

For warranty information or technical support, please refer to the documentation provided with your purchase or contact LEDVANCE customer service directly. Keep your proof of purchase for warranty claims.