소개
Thank you for choosing the Milex 2 Burner Gas Braai. This manual provides essential information for the safe assembly, operation, and maintenance of your new gas braai. Please read these instructions thoroughly before use and retain them for future reference.
The Milex 2 Burner Gas Braai features powerful burners for precise heat control, a sleek design, and high-quality materials for durability. It includes convenient features such as a warming rack, automatic ignition, and a gas bottle hook.
중요한 안전 정보
- 야외 사용 전용: 본 제품은 실외 전용으로 설계되었습니다. 실내에서 사용하지 마십시오.
- 통풍: Ensure adequate ventilation. Do not operate in an enclosed area.
- 기체 실린더: Store gas cylinders in a well-ventilated area, away from heat sources.
- 인화성 물질: Keep flammable materials, liquids, or aerosols away from the appliance.
- 누출 테스트: Always perform a leak test on all gas connections before first use and after any gas cylinder change.
- 어린이와 애완동물: 어린이와 애완동물을 뜨거운 기기에서 멀리하십시오.
- 감독: 사용 중에는 절대로 기기를 방치하지 마십시오.
- 지침을 읽어보세요: Always read and follow all instructions in this booklet before operating the appliance.
설정 및 조립
Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the included assembly diagram for detailed steps.
- Assemble the Main Body: Follow the instructions to connect the base and main grill housing.
- 측면 선반 부착: Secure the side shelves to the main body using the provided hardware. These shelves offer convenient space for utensils and platters.
- 바퀴를 설치하십시오: Attach the wheels to the designated locations on the base for easy mobility.
- Place Cooking Grills and Warming Rack: Position the black matte enamel cast iron cooking grill and the iron wire warming rack inside the braai.
- Connect Gas Regulator and Hose: The braai comes with a ZA regulator and 60cm PVC hose. Connect the hose to the braai's gas inlet and the regulator to your gas bottle. Ensure all connections are tight.
- 누출 테스트를 실시하십시오: Before first use, apply a soapy water solution to all gas connections. Bubbles indicate a leak. Tighten connections or replace parts as necessary. Do not use the braai if a leak is detected.
그림 1: 전면 view of the Milex 2 Burner Gas Braai, illustrating its compact design and side shelves.
작동 지침
버너 조명:
- 뚜껑 열기: Always open the braai lid before lighting.
- 가스 공급을 켜세요: 가스통 밸브가 완전히 열려 있는지 확인하십시오.
- Ignite First Burner: Push and turn the control knob for the left burner to the "HIGH" position. Immediately push and hold the ignitor button for 3-5 seconds. You should hear a click and see the burner ignite.
- Ignite Second Burner: Once the left burner is lit, turn its control knob to "HIGH". The right burner will automatically ignite from the flame of the left burner.
- 열 조절: Once both burners are lit, adjust the control knobs to your desired heat level (LOW to HIGH).
- 점화 장치 문제 해결: If a burner does not light within 5 seconds, turn off the gas supply, wait 5 minutes, and repeat the lighting procedure. If ignition issues persist, refer to the Troubleshooting section.
Cooking with Your Braai:
- 예열: Close the lid and allow the braai to preheat for 10-15 minutes on medium heat before placing food on the grill.
- 온도 조절: Use the control knobs to adjust the flame intensity for different cooking requirements. The integrated thermometer in the hood allows for accurate temperature monitoring.
- 온난화 랙: Utilize the warming rack to keep cooked food warm or to gently toast buns.
- 균일한 요리: The black matte enamel cast iron cooking grill ensures even heat distribution for consistent results.
Figure 2: The Milex 2 Burner Gas Braai in use, demonstrating the cooking surface and side shelves.
제품 끝view 동영상
이 영상은 시각적으로 다음을 제공합니다.view of the Milex 2 Burner Gas Braai, showcasing its design, features, and ease of use, including the push-button ignition and cooking capabilities.
유지 보수 및 관리
- 그릴 그릴 청소: After each use, once the braai has cooled, clean the black matte enamel cast iron cooking grill. The product care instructions specify "Hand Wash Only" for these components. Use a grill brush to remove food residue.
- 외부 청소: Wipe down the steel hood and front panel with a damp 천과 순한 세제. 마감을 손상시킬 수 있는 연마성 세척제는 피하세요.
- 버너 유지관리: Periodically check burner ports for blockages (e.g., from food debris or insects). Clean with a wire brush if necessary.
- 저장: When not in use for extended periods, store the braai in a dry, protected area. Disconnect the gas bottle.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 버너가 켜지지 않음 | Gas bottle empty or valve closed; Ignitor not sparking; Blocked burner ports. | Check gas level and open valve; Check ignitor battery (if applicable) or connection; Clean burner ports. |
| 불균일한 가열 | Blocked burner ports; Incorrect gas pressure. | Clean burner ports; Ensure regulator is correctly attached and gas flow is adequate. |
| 가스 누출 감지됨 (비눗물 테스트) | Loose connections; Damaged hose or regulator. | Tighten all gas connections; Replace damaged hose or regulator immediately. Do not use the braai until the leak is fixed. |
제품 사양
- 상표: 밀렉스
- 모델: 2 Burner Gas Braai
- 색상: 검은색
- 재료: Stainless Steel (Burner, Thermometer, Handle), Steel (Hood & Front Panel), Cast Iron (Cooking Grill), Iron Wire (Warming Rack)
- 패키지 크기: 79 x 58 x 44cm
- 품목 무게: 13kg
- 버너 : 2, #409 Stainless Steel
- 점화: 자동 점화
- 포함된 구성 요소: Gas Braai, ZA Regulator, 60cm PVC Hose
- 권장 사용: Outdoor Home Use
보증 및 지원
For warranty information or technical support, please contact Milex customer service. Spare part information is not available or provided directly in this manual. Please refer to the official Milex website or your retailer for further assistance.
You can visit the official Milex store for more products and information: Milex Store on Amazon.co.za
