MAIDeSITe JC35M3

MAIDESITe JC35M3 전동 휠체어 리프트 카펫 발판 사용 설명서

Model: JC35M3

1. 서론

Thank you for choosing MAIDeSITe Electric Chair Lift Carpet Foot Pads. This manual provides essential instructions for the proper installation, use, and maintenance of your new foot pads. Designed for the JC35M3 chair lift, these pads enhance stability on various surfaces, including carpets and hard floors. Please read this manual thoroughly before installation and retain it for future reference.

2. 안전 정보

3. 패키지 내용

패키지에는 다음 항목이 포함되어 있어야 합니다.

4. 설정 및 설치

Installation of the MAIDeSITe JC35M3 foot pads is designed to be straightforward and requires no special tools.

  1. Prepare the Chair Lift: Ensure your MAIDeSITe JC35M3 chair lift is turned off and positioned securely to prevent accidental movement during installation.
  2. 부착 지점 찾기: Identify the threaded attachment points on the bottom of your chair lift legs. These are where the foot pads will be secured.
  3. 발 패드 부착: Take one foot pad. Align the threaded screw on the foot pad with an attachment point on the chair lift leg. Gently rotate the foot pad clockwise until it is securely fastened. No tools are required; hand-tightening is sufficient.
  4. Repeat for All Pads: Repeat step 3 for all six foot pads, ensuring each is firmly attached to a chair lift leg.
  5. 안정성 확인: Once all pads are installed, gently test the stability of the chair lift before use. Ensure there is no wobbling and all pads are making firm contact with the floor.
Diagram showing how to install the MAIDeSITe JC35M3 foot pad onto a chair lift leg by rotating it.
Image 1: Foot Pad Installation Diagram. This image illustrates the simple rotation method for attaching the MAIDeSITe JC35M3 foot pad to the base of a chair lift leg. An arrow indicates the upward direction of attachment, showing the threaded screw on the pad aligning with the chair's base. Below, six individual foot pads are shown, representing the complete set.

5. 사용

The MAIDeSITe JC35M3 Electric Chair Lift Carpet Foot Pads are designed to provide enhanced stability for your chair lift on various floor types.

6. 유지관리

To ensure the longevity and continued performance of your foot pads, follow these simple maintenance guidelines:

7. 문제 해결

문제가능한 원인해결책
Chair lift feels unstable or wobbly after installation.Foot pads are not securely tightened. One or more foot pads are damaged.Ensure all foot pads are hand-tightened firmly. Inspect each pad for damage and replace if necessary.
Foot pad does not attach properly.Incorrect alignment of threads. Damage to the foot pad's screw or chair lift's attachment point.Re-align the foot pad carefully and try rotating again. If threads appear damaged, contact customer support.

8. 사양

모델JC35M3
재료플라스틱
색상파란색
모양둥근
표면 추천단단한 바닥, 카펫
항목 수6
제품 치수3.9 x 3.9 x 2 인치
제품 무게 (패드당)Approximately 1.07 ounces (6.4 ounces / 6 pads)

9. 보증 및 지원

For warranty information or technical support regarding your MAIDeSITe Electric Chair Lift Carpet Foot Pads, please contact MAIDeSITe customer service. Refer to your original purchase documentation or the MAIDeSITe official web연락처 정보 사이트.

MAIDeSITe Official Web대지: Visit MAIDeSITe Store on Amazon

관련 문서 - JC35M3

사전view 메이데사이트 체어리프트 사용 설명서: 안전, 작동 및 유지 관리 가이드
메이데사이트 체어리프트에 대한 종합적인 사용 설명서로, 안전 지침, 충전기 및 컨트롤러 작동, 제품 구조, 기술 사양 및 유지 관리에 대한 내용을 담고 있습니다. 가정 재활용으로 설계되었습니다.
사전view MAIDeSITe AX05 전동 리프트 의자 사용 설명서
MAIDeSITe 전동 리프트 의자 - AX05의 포괄적인 사용 설명서로, 제품 설명, 안전 경고, 조립 설명서, 사용 지침, 유지 관리, 보관, 운반 및 애프터서비스에 대한 자세한 정보를 제공합니다. 노약자와 장애인의 앉고 일어서는 동작을 돕기 위해 설계되었습니다.
사전view MAIDESITE T1 Pro 스탠딩 데스크 프레임 사용 설명서
이 사용 설명서는 MAIDESITE T1 Pro 스탠딩 데스크 프레임에 대한 조립 단계, 부품 목록 및 제품 사양을 포함하여 조립 방법 및 안전 정보를 제공합니다.
사전view Maidesite 인체공학적 사무실 의자: 설치 및 조정 가이드
Maidesite 인체공학적 사무용 의자 조립 및 조정에 대한 자세한 설명서입니다. 부품 목록, 하드웨어 가이드, 단계별 조립 과정, 그리고 최적의 편안함과 인체공학적 설계를 위한 기능 조정 방법이 포함되어 있습니다.
사전view Maidesite 전동 높이 조절 책상 사용 설명서
조립, 작동, 문제 해결 방법을 다루는 메이데사이트 전동 높이 조절 책상 사용 설명서입니다.
사전view 메이데사이트 스탠딩 데스크 T2 Pro/T2 Pro Plus 사용 설명서
Maidesite Standing Desk T2 Pro 및 T2 Pro Plus에 대한 포괄적인 사용자 가이드로, 안전, 조립, 제어판 지침 등이 포함되어 있습니다.