AZZA CSAZ-570B Cove ATX 미드타워 컴퓨터 케이스 사용 설명서

1. 소개 및 이상view

The AZZA CSAZ-570B Cove is an ATX mid-tower computer case designed for gaming and high-performance PC builds. It features a back-connect supported design, optimizing cable management and internal aesthetics. This manual provides essential information for setting up, operating, and maintaining your computer case.

그림 1: 전면 view of the AZZA CSAZ-570B Cove computer case with RGB fans visible.

주요 특징:

• Performance Optimized: Full mesh front panel with 4 x 120 mm pre-installed addressable RGB fans for excellent airflow.
• Multifaceted Airflow Support: Supports up to 10 x 120 mm fans, including direct GPU airflow with 2 x 120 mm fans above the PSU shroud.
• 사용자 정의 가능한 조명: Controllable fan lighting via the top panel LED button, with motherboard RGB software synchronization support.
• Intuitive I/O: Top panel includes Power button, LED button, Combo HD Audio, 1 x USB 2.0, 1 x USB 3.0, and 1 x Type-C port.
• Back-Connect Supported: Designed to accommodate motherboards with back-mounted connectors for cleaner internal routing.

2. 설정 및 설치

This section outlines the steps for installing components into your AZZA CSAZ-570B Cove computer case.

2.1 마더 보드 설치

The case supports ATX (including back-connect supported), Micro ATX, and ITX motherboards. Ensure standoffs are correctly aligned for your motherboard form factor before installation.

Figure 2: Internal layout indicating motherboard support area (A), maximum CPU cooler height (B), and maximum GPU length (C).

• 마더 보드를 사전 설치된 격리 애자에 맞 춥니 다.
• Secure the motherboard using appropriate screws.
• Connect all necessary power cables (24-pin ATX, CPU 8-pin) and data cables.
• For back-connect motherboards, route cables through the designated rear channels.

2.2 냉각 시스템 구성

The CSAZ-570B offers extensive cooling options for optimal thermal performance.

Figure 3: Diagram illustrating fan mounting locations and sizes within the case.

팬 지원:

• 앞쪽: 4 x 120mm (pre-installed ARGB fans)
• 맨 위: 3 x 120mm 또는 2 x 140mm
• 뒤쪽: 1 x 120mm
• 측면(마더보드 트레이): 3 x 120mm
• 파워서플라이 덮개 위쪽: 2 x 120mm (for direct GPU airflow)

Figure 4: Diagram showing radiator compatibility for the AZZA CSAZ-570B case.

라디에이터 지원 :

• Motherboard Side: 최대 360mm
• 맨 위: Up to 280mm or 360mm

2.3 저장장치 설치

The case provides flexible options for installing 2.5" SSDs and 3.5" HDDs.

그림 5: 내부 view highlighting locations for SSD and HDD installation.

• 오른쪽 패널: Supports 2 x 2.5" SSDs or 1 x 3.5" HDD.
• 금속 트레이: Supports 1 x 2.5" SSD.

2.4 전원 공급 장치 설치

The power supply mounts at the bottom of the case.

• Slide the power supply into the designated compartment at the bottom rear of the case.
• 케이스 뒷면에서 나사를 사용하여 전원 공급 장치를 고정하십시오.

3. 사용 설명서

This section details the functionality of the front I/O panel and lighting controls.

3.1 전면 I/O 패널

상단 패널을 통해 주요 포트와 제어 장치에 편리하게 접근할 수 있습니다.

그림 6: 클로즈업 view of the top I/O panel with labeled ports and buttons.

• 전원 버튼: Press to power on or off the system.
• LED 버튼: Cycles through various pre-programmed ARGB lighting modes for the installed fans.
• Combo HD Audio: 헤드폰과 마이크를 연결합니다.
• USB 2.0 x 1: 주변기기 연결을 위한 표준 USB 포트입니다.
• USB 3.0 x 1: High-speed USB port for data transfer.
• Type-C x 1: Reversible USB-C port for modern devices.

3.2 ARGB 조명 제어

기본 설치된 ARGB 팬은 두 가지 방식으로 제어할 수 있습니다.

• LED 버튼: Use the dedicated LED button on the top panel to cycle through different lighting effects and colors.
• Motherboard RGB Software: If your motherboard supports Addressable RGB (ARGB) synchronization, connect the case's ARGB cable to the motherboard's ARGB header. This allows you to control the fan lighting directly through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Ensure the LED button is not actively overriding the motherboard control.

4. 유지관리

정기적인 유지 관리는 컴퓨터 케이스와 구성 요소의 최적 성능과 수명 연장에 도움이 됩니다.

• 먼지 청소: Periodically clean dust filters (if present) and internal components using compressed air. Dust accumulation can impede airflow and lead to overheating.
• 팬 청소: Gently clean fan blades to remove dust buildup, which can affect fan performance and noise levels.
• 케이블 관리 : Ensure cables are neatly routed and secured to prevent interference with airflow and moving parts.
• 외부 청소: 부드러운 d로 외부 표면을 닦으십시오.amp 옷감. 연마성 세제를 피하십시오.

5. 문제 해결

This section provides general troubleshooting tips for common issues.

• 시스템 전원이 켜지지 않음:
  • Check if the power supply is properly connected to the wall outlet and the motherboard.
  • 케이스에서 나오는 전원 버튼 케이블이 마더보드의 전면 패널 헤더에 올바르게 연결되어 있는지 확인하십시오.
  • 전원 스위치가 '켜짐' 위치에 있는지 확인하십시오.
• 팬이 회전하지 않음/RGB가 작동하지 않음:
  • Confirm fan power cables are securely connected to the motherboard or fan controller.
  • Check ARGB cables for proper connection to the motherboard's ARGB header or the case's ARGB controller.
  • If using motherboard software, ensure the software is running and configured correctly.
  • Try cycling the LED button on the top panel to see if the lights respond.
• USB 포트가 작동하지 않음:
  • Ensure the USB 2.0, USB 3.0, and Type-C headers from the case are correctly plugged into the corresponding headers on your motherboard.
  • Check device drivers for your motherboard's USB controllers.

6. 사양

Detailed technical specifications for the AZZA CSAZ-570B Cove computer case.

Figure 7: Product dimensions of the AZZA CSAZ-570B case.

7. 보증 및 지원

For warranty information and technical support, please contact AZZA directly.

• 제조업체: 아자
• 파는 사람: AZZA USA (via Amazon)
• 제품 보호 플랜: Additional protection plans are available for purchase separately. These plans offer extended coverage beyond the standard manufacturer's warranty.
• 3년 보호 계획
• 4년 보호 계획
• Complete Protect(월간 구독)
• 반품 정책: This product is eligible for a 30-day return policy (refund/replacement) from the date of purchase.
• Official AZZA Store: For further information and product updates, visit the AZZA Store on Amazon.