1. 서론
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the BDPQKPDV Motorized Brass Valve, including models VC6013 and VC4013. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and to prevent damage or injury.
1.1 안전 정보
- 설치, 유지관리 또는 문제 해결을 하기 전에 항상 전원을 분리하세요.
- 모든 전기 연결이 해당 지역의 법규와 규정을 준수하는지 확인하세요.
- 설치는 자격을 갖춘 사람이 수행해야 합니다.
- 지정된 볼륨을 초과하지 마십시오tage or pressure ratings.
- 설치 및 유지관리 시에는 적절한 개인 보호 장비(PPE)를 착용하세요.
2. 제품 오버view
The BDPQKPDV Motorized Brass Valve is designed for controlling the flow of water in various applications. It features a durable brass body and an electric actuator for reliable operation. This series includes 2-way and 3-way configurations, with models like VC6013 (three lines, two controls) and VC4013 (three lines, one control), operating on 220VAC power.
그림 1: BDPQKPDV Motorized Brass Valve body. This image shows the robust brass construction of the valve, with the spring-loaded mechanism visible at the top, indicating its motorized function. Ports are visible on the sides for connection to plumbing.
3. 사양
| 모델 번호 | VC6013 (3 lines, 2 controls), VC4013 (3 lines, 1 control) |
| 제어 방법 | 스위치 유형 |
| 권tage | 220VAC (±10%) |
| 전력 소비 | 6 watts (during actuation) |
| 액션 시간 | 6 seconds (at 60Hz) |
| 케이블 연결 | 0.5m 케이블 포함 |
| Port Size (Current Variant) | DN15 (1/2인치) |
| 메디아 | 물 |
| 재료 | 놋쇠 |
| 매체의 온도 | 평온 |
| 압력 | 저기압 |
| 품목 무게 | 1.76온스(약 50g) |
| 패키지 크기 | 1.18 x 0.79 x 0.39인치(약 3 x 2 x 1cm) |
4. 설정 및 설치
4.1 Mounting the Valve Body
- Ensure the system is depressurized and drained before installation.
- Identify the inlet and outlet ports on the valve body. An arrow on the valve body typically indicates the direction of flow.
- Thread the valve into the plumbing system. Use appropriate thread sealant (e.g., PTFE tape) to ensure a watertight connection. Do not overtighten.
- 밸브는 향후 유지보수를 위해 접근하기 쉬운 위치에 설치해야 합니다.
4.2 전기 배선
The valve operates on 220VAC. Wiring configurations vary between VC6013 (three lines, two controls) and VC4013 (three lines, one control). Refer to the specific wiring diagram provided with your valve model for precise connections.
- General Wiring Precaution: Always ensure power is OFF at the circuit breaker before making any electrical connections.
- Connect the power supply (220VAC) to the designated terminals on the actuator.
- For switch-type control, connect the control wires to a suitable switch or control system.
- 모든 연결 부분이 안전하고 절연되어 있는지 확인하여 단락을 방지하세요.
5. 사용 설명서
The BDPQKPDV Motorized Brass Valve uses a switch-type control method. When the control signal is applied, the actuator will move the valve to its open or closed position. The action time for a full cycle (open to close or close to open) is approximately 6 seconds at 60Hz.
- To Open/Close the Valve: Activate the connected switch or control system. The actuator will energize and move the valve to the commanded position.
- The valve will hold its position once the actuation is complete and power is removed from the motor (power is only consumed during the 6-second actuation period).
- Observe the flow indicator (if present) or listen for the change in flow to confirm valve operation.
6. 유지관리
Regular maintenance ensures the longevity and reliable operation of your motorized brass valve.
- 연례 검사: 밸브에 누출, 부식 또는 물리적 손상 징후가 있는지 정기적으로 점검하십시오.
- 전기 연결: Check electrical connections for tightness and signs of wear or overheating.
- 액추에이터 기능: Test the valve's operation periodically to ensure the actuator moves smoothly and completes its full travel.
- 청소: Keep the exterior of the valve and actuator clean and free from dust or debris. Do not use harsh chemicals that could damage the brass or plastic components.
- 사용자가 수리할 수 없는 부품: The internal components of the actuator and valve body are not designed for user servicing. Do not attempt to disassemble the unit beyond what is described in this manual.
7. 문제 해결
If you encounter issues with your BDPQKPDV Motorized Brass Valve, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Valve does not operate (no movement) | No power to actuator; faulty wiring; actuator failure. | Check power supply (220VAC). Verify all wiring connections are secure. If power is present and wiring is correct, the actuator may need replacement. |
| Valve operates slowly or partially | 낮은 볼륨tage; obstruction in valve; actuator malfunction. | Verify stable 220VAC supply. Check for debris in the pipeline (requires system shutdown and valve removal). If issues persist, actuator may be faulty. |
| 밸브 본체에서 누출 | Improperly sealed connections; damaged valve body. | Ensure pipe threads are properly sealed with PTFE tape and tightened correctly. If the valve body is damaged, it must be replaced. |
문제 해결 단계를 수행해도 문제가 해결되지 않으면 고객 지원팀에 문의하여 추가 지원을 받으세요.
8. 보증 및 지원
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact BDPQKPDV customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
연락처 정보: 자세한 내용은 제조사 공식 웹사이트를 참조하십시오. web최신 연락처 정보는 웹사이트 또는 제품 포장에서 확인하실 수 있습니다.
