1. 서론
The ELKO EP RFSAI-62B-SL/MT is a state-of-the-art switching actuator designed for smart home environments. This unit features two output relays, making it suitable for controlling various consumer appliances and lighting systems. It integrates seamlessly into Matter-compatible ecosystems through the Thread protocol, ensuring broad interoperability with other Matter-certified devices.
Beyond traditional switches and buttons, the RFSAI-62B-SL/MT can also be controlled using wireless wall switches like the RFGB-40-MT. Its robust design allows for a range of up to 200 meters in open air, providing flexible installation options. The device supports a maximum switching capacity of 2000 W (8 A) and utilizes an AgSnO2 + Zero Cross relay contact, optimized for switching lighting loads efficiently.
2. 안전 정보
Please read this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- 설치는 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 기기를 설치하거나 수리하기 전에 회로 차단기에서 전원을 차단하십시오.
- 기기를 습기, 극한의 온도 또는 직사광선에 노출시키지 마세요.
- 장치가 지정된 볼륨 내에서 사용되었는지 확인하십시오.tage and current ratings (AC 230 V, 8 A).
- 장치를 수리하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1x ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator
- 1x 사용자 매뉴얼(이 문서)
4. 제품 오버view
The RFSAI-62B-SL/MT is a compact unit designed for flush mounting. Below is an image of the device with key components highlighted.
Figure 4.1: ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator.
This image shows the ELKO EP RFSAI-62B-SL/MT Matter Switching Actuator. The device is white with black screwless terminals at the bottom. The top surface features the 'iNELS' logo, 'Switch unit', 'RFSAI-62B-SL/MT', and the 'matter' logo. There are labels for 'LED' and 'PROG' indicating an LED indicator and a program button. Wiring diagrams are printed above the terminals, labeled S1, S2, N, L, V2, and V1.
주요 구성 요소:
- LED 표시등: 상태 피드백을 제공합니다.
- PROG (Program/RESET) Button: Used for pairing, resetting, and other programming functions.
- Screwless Terminals: For secure and easy wiring connections.
- S1, S2: Input terminals for external switches/buttons.
- N: 중성선 연결.
- L: Live wire connection (AC 230V).
- V1, V2: Output terminals for controlled loads (e.g., lighting, appliances).
5. 설정 및 설치
설치를 진행하기 전에 메인 회로 차단기에서 전원이 차단되었는지 확인하십시오.
5.1 배선 지침
- 전원 차단: Turn off the main power supply to the circuit where the actuator will be installed. Verify with a voltag전자 테스터.
- 전원 연결:
- 연결하다 라이브(L) wire (AC 230V) to the 'L' terminal on the actuator.
- 연결하다 중립(N) wire to the 'N' terminal on the actuator.
- 부하 연결:
- Connect the load (e.g., light fixture) to the V1 그리고/또는 V2 terminals. Ensure the neutral wire of the load is connected to the main neutral line.
- 외부 스위치 연결(선택 사항):
- If using external push-buttons or switches, connect them to the S1 그리고 S2 terminals. These inputs can be configured for various control modes.
- 안전한 설치: Place the actuator securely within a suitable electrical box or enclosure.
- 복원력 : 모든 연결이 안전하게 확인되면 회로 차단기에서 전원을 복구하십시오.
5.2 Matter Network Integration
To integrate the RFSAI-62B-SL/MT into your smart home system, you will need:
- One or more Thread Border Routers connected to your Wi-Fi network.
- A Matter-compatible hub (e.g., Home Assistant, Apple HomeKit, Google Home, Amazon Alexa).
- The associated mobile application for your chosen Matter hub.
Follow the pairing instructions provided by your Matter hub's application. Typically, this involves putting the device into pairing mode (often by pressing the PROG/RESET button for a specified duration) and scanning a QR code or entering a pairing code provided with the device.
6. 사용 설명서
Once successfully integrated into your Matter network, the RFSAI-62B-SL/MT can be controlled in several ways:
- Via Matter Hub Application: Use your preferred Matter controller application (e.g., Home Assistant, Apple Home, Google Home) to remotely switch the connected loads ON or OFF.
- Via External Switches: If wired, the S1 and S2 inputs allow control via traditional wall switches or push-buttons. The functionality of these inputs can be configured within your Matter ecosystem.
- Via Wireless Wall Switches: Compatible wireless wall switches, such as the ELKO EP RFGB-40-MT, can be paired with the actuator for convenient local control without additional wiring.
- PROG/RESET Button: While primarily for pairing and resetting, the PROG button may also offer basic toggle functionality depending on the specific firmware and Matter configuration.
7. 유지관리
The ELKO EP RFSAI-62B-SL/MT is designed for maintenance-free operation. However, consider the following:
- 청소: If necessary, gently wipe the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- 펌웨어 업데이트: Periodically check your Matter hub's application for available firmware updates for the actuator to ensure optimal performance and security.
- 환경 조건: Ensure the device remains within its specified operating environment (temperature, humidity) to prevent damage.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치가 응답하지 않습니다. | No power; Not paired; Out of Thread network range. | Check power supply; Re-pair the device; Ensure it's within range of a Thread Border Router. |
| Cannot connect to Matter network. | Incorrect pairing procedure; Matter hub issue; Thread Border Router issue. | Refer to your Matter hub's pairing guide; Restart Matter hub and Thread Border Router; Try factory resetting the actuator (long press PROG/RESET button). |
| 연결된 부하가 전환되지 않습니다. | Incorrect wiring; Overload; Faulty load. | Verify wiring connections; Check load's power consumption against actuator's max rating (2000W/8A); Test the load independently. |
| External switch (S1/S2) not working. | Incorrect wiring; Switch type not compatible; Configuration issue in Matter app. | Check wiring to S1/S2; Ensure switch is compatible (e.g., momentary push-button vs. toggle); Verify input configuration in your Matter hub. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 제품 크기(L x W x H) | 4.3 x 4.4 x 2.2cm(1.69 x 1.73 x 0.87인치) |
| 제조업체 | 엘코 EP |
| 모델 번호 | 8975 (Internal), RFSAI-62B-SL/MT (Product) |
| 작동 모드 | 전기 같은 |
| 현재 평가 | 8A(최대 2000W) |
| 운영 볼륨tage | 230볼트(AC) |
| 연락처 유형 | Normally Closed (AgSnO2 + Zero Cross relay) |
| 커넥터 유형 | 플러시 마운트 |
| 스위치 유형 | Dimmer (Note: Product description indicates a switching unit, not a dimmer) |
| 터미널 유형 | Wago (Screwless terminals) |
| 재료 | 플라스틱 |
| 통신 프로토콜 | Matter (Application Protocol), Thread (Communication Protocol) |
| 스위치 수 | 2 (8 A/AC1) |
| 범위 | 최대 200m (야외) |
10. 보증 및 지원
ELKO EP products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ELKO EP web사이트를 방문하거나 현지 유통업체에 문의하세요.
추가 지원을 받으려면 다음을 방문하세요. www.elkoep.com
