1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO N5 NAS PC Case. The JONSBO N5 is designed for multi-drive NAS storage and high-performance computing hosts, featuring a robust structure and extensive compatibility for various components. Please read this manual thoroughly before proceeding with any installation or operation.
Image 1.1: JONSBO N5 12-drive bay NAS Chassis overview.
2. 제품 오버view
The JONSBO N5 chassis is engineered for versatility and performance, supporting a wide range of hardware configurations. Its design incorporates an upper and lower compartment structure, optimizing space for components and airflow.
주요 특징:
- 드라이브 베이 : Supports 12x 3.5-inch hot-swappable HDDs in the front and 4x 2.5-inch SSDs on the side.
- 마더보드 호환성: Compatible with ITX, M-ATX, ATX, and E-ATX motherboards.
- GPU 지원: Accommodates up to 4 graphics cards.
- 냉각 시스템: Features extensive fan support (Front 120mm*2 or 140mm*2, Right 120mm*3, Rear 120mm*3 (standard), Left 120mm*3) and front AIO support (240mm/280mm).
- 전원 공급 장치: Supports ATX power supplies (170mm-240mm).
- 전면 인터페이스: Includes USB 3.2 Gen2 Type-C*1 and USB 3.0*(2IN1) for high-speed data transfer.
- 재료: Constructed from steel plate, aluminum plate, and features North American black walnut veneer.
Image 2.1: JONSBO N5 NAS PC Case in a typical desktop environment.
3. 설정 및 설치
Follow these steps for proper assembly and installation of components into your JONSBO N5 case.
3.1 섀시 준비
- Carefully unpack the chassis and all accessories.
- Remove the top cover and side panels to access the internal compartments. The top cover is designed for easy removal.
Image 3.1: Front panel of the JONSBO N5 case opened to reveal drive bays.
3.2 마더 보드 설치
- Identify the correct standoff locations for your motherboard size (ITX, M-ATX, ATX, E-ATX).
- Install the necessary standoffs and carefully place your motherboard, securing it with screws.
Image 3.2: Diagram illustrating motherboard compatibility (ITX, M-ATX, ATX, E-ATX) within the chassis.
3.3 드라이브 설치(HDD/SSD)
- 3.5인치 HDD: The front compartment supports 12 hot-swappable 3.5-inch HDDs. Slide each HDD into its designated bay until it clicks into place.
- 2.5인치 SSD: The case supports 4x 2.5-inch SSDs for side installation. Secure these drives in their respective mounting locations.
- Connect the SATA data and power cables to the drives and the server-grade hot-swappable backplane.
이미지 3.3: 내부 view highlighting the 12x 3.5-inch HDD bays and 4x 2.5-inch SSD mounting locations.
Image 3.4: Server-grade hot-swappable backplane for reliable drive connections.
3.4 전원 공급 장치(PSU) 설치
- The case supports ATX power supplies ranging from 170mm to 240mm.
- If using a PSU ≤ 170mm, all 12 front HDD slots can be utilized.
- If using a PSU ≥ 170mm, the front compartment can accommodate 8 HDD slots (requires removal of a side movable hard drive compartment).
- Mount the PSU in its designated area and connect all necessary power cables to the motherboard, drives, and other components.
Image 3.5: Diagram showing PSU installation and its impact on HDD bay availability.
3.5 그래픽 카드(GPU) 설치
- The JONSBO N5 supports up to 4 graphics cards.
- Ensure your GPU length is within the supported limits: <325mm with front AIO, or <350mm with front fans.
- Install GPUs into the available 8 PCI expansion slots.
이미지 3.6: 내부 view demonstrating graphics card installation and clearance.
3.6 냉각 시스템 설정
- The case comes standard with 3x 120mm fans installed at the rear.
- Additional fan support: Front (2x 120mm or 2x 140mm), Right (3x 120mm), Rear (3x 120mm, Standard), Left (3x 120mm).
- For water cooling, the front supports 240mm or 280mm integrated AIO solutions.
- CPU cooler height is limited to <160mm.
Image 3.7: Diagram showing various fan and cooling configurations within the chassis.
Image 3.8: Illustration of AIO water cooling radiator placement in the front of the case.
3.7 전면 패널 연결
- Connect the front panel cables (USB 3.2 Gen2 Type-C, USB 3.0, audio, power, reset) to their corresponding headers on your motherboard.
Image 3.9: Detail of the front panel interfaces, including USB 3.2 Gen2 Type-C and USB 3.0 ports.
4. 사용 설명서
모든 구성 요소가 설치 및 고정되고 모든 케이블이 연결되면 시스템 전원을 켤 수 있습니다.
- 전원 공급 스위치가 'ON' 위치에 있는지 확인하세요.
- Press the power button on the front panel of the chassis.
- Monitor system boot-up and ensure all drives are detected by your operating system or NAS software.
5. 유지관리
Regular maintenance helps ensure the longevity and optimal performance of your JONSBO N5 PC Case and its components.
5.1 청소
- Periodically clean dust from the case's ventilation areas, especially the top and side panels. Use compressed air or a soft brush.
- The front dust filter is located behind a grate and is not easily removable. Use a vacuum cleaner with a brush attachment to clean it.
- For the wooden veneer, wipe gently with a dry, soft cloth. Avoid harsh chemicals.
5.2 팬 교체
- If a fan becomes noisy or fails, it may need replacement. Refer to the fan support specifications for compatible sizes.
- Disconnect power before attempting any internal component replacement.
6. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
6.1 시스템 전원이 켜지지 않음
- Check if the power supply is properly connected to the wall outlet and the PSU switch is ON.
- 파워서플라이의 모든 전원 케이블이 마더보드 및 구성 요소에 제대로 연결되어 있는지 확인하십시오.
- 전면 패널 전원 버튼 케이블이 마더보드 헤더에 올바르게 연결되어 있는지 확인하십시오.
6.2 Drives Not Detected
- Confirm that SATA data and power cables are securely connected to both the drives and the hot-swappable backplane.
- Check the backplane connections to the motherboard (if applicable, via a SATA controller card).
- 드라이브가 베이에 완전히 장착되었는지 확인하십시오.
- If using a PSU ≥ 170mm, confirm that the correct number of HDD slots are being used (max 8 in front).
6.3 과도한 소음
- Inspect all fans (CPU, case, GPU, PSU) for obstructions or loose mounting.
- The included case fans may be audible; consider replacing them with quieter aftermarket fans if noise is a concern.
- Ensure all panels are securely closed to prevent rattling.
7. 사양
| 특징 | 사양 |
|---|---|
| 모델명 | N5 |
| 제품 크기(LxWxH) | 15.8 x 13.9 x 13.8 inches (W355*D403*H350mm) |
| 품목 무게 | 20.6파운드(9.37킬로그램) |
| 재료 | Steel plate, Aluminum plate, Wood (North American black walnut veneer) |
| 하드 드라이브 베이 | 12x 3.5" HDD (hot-swappable), 4x 2.5" SSD |
| 마더보드 호환성 | ITX, M-ATX, ATX, E-ATX (up to 330mm) |
| PCI 확장 슬롯 | 8개 슬롯 |
| 전면 포트 | USB 3.2 Gen2 Type-C*1, USB 3.0*(2IN1) |
| 전원 공급 지원 | ATX 170mm-240mm (≤170mm for 12 HDDs, ≥170mm for 8 HDDs) |
| CPU 쿨러 높이 제한 | <160mm |
| GPU 길이 제한 | <325mm (with front AIO), <350mm (with front fans) |
| 냉각 시스템(팬 지원) | 전면: 120mm 2개 또는 140mm 2개 Right: 3x 120mm Rear: 3x 120mm (Standard) Left: 3x 120mm |
| 워터쿨링 지원 | Front: 240mm or 280mm AIO |
Image 7.1: JONSBO N5 NAS PC Case with key dimensions (W355*D403*H350mm) indicated.
Image 7.2: Detailed product specifications for the JONSBO N5 NAS PC Case.
8. 공식 제품 영상
Video 8.1: Official JONSBO N5 PC NAS Case product video, demonstrating features and internal layout.
9. 보증 및 지원
보증 정보 및 기술 지원에 대해서는 JONSBO 공식 웹사이트를 참조하십시오. web해당 웹사이트를 방문하거나 판매점에 문의하십시오. 구체적인 보증 조건은 지역 및 판매점에 따라 다를 수 있습니다.
For additional protection, extended protection plans may be available for purchase separately. Please consult your retailer for details on available protection plans.
