1. 서론
The Pedrollo TOP 2 submersible pump is designed for pumping clear water without abrasive particles. This 0.5 HP, 115 Volt pump is engineered for ease of use and reliable operation, featuring total motor cooling and a double mechanical seal on the shaft for enhanced safety and durability.
It is particularly suitable for emergency draining of small flooded areas such as basements, garages, and fountains, as well as for emptying containers or water tanks, and draining water from dishwashers and washing machines.
2. 안전 정보
Always prioritize safety when operating electrical equipment, especially with water. Read and understand all instructions before installation and use.
- 전기 연결: Ensure the power supply matches the pump's specifications (115 Volts). Connect the pump to a properly grounded outlet with a residual current device (RCD) for protection against electric shock.
- 물의 질: This pump is designed for clear water. Do not use it for pumping flammable liquids, corrosive chemicals, or water containing large abrasive particles.
- 온도 제한: The maximum liquid temperature for continuous operation is +40 °C. For intermittent use, the pump can handle temperatures up to +40 °C for a maximum period of 3 minutes.
- 손질: Always use the integrated handle for lifting and lowering the pump. Never pull the pump by its power cable or discharge hose.
- 어린이와 애완동물: Keep children and pets away from the pump and the area of operation.
- 유지: 유지보수 또는 청소를 하기 전에 펌프의 전원을 차단하십시오.
3. 설정 및 설치
펌프의 성능과 수명을 위해서는 적절한 설치가 중요합니다.
3.1 풀기 및 검사
Carefully remove the pump from its packaging. Inspect the pump for any signs of damage during transit. Ensure all components, including the 5-meter power cable and integrated float switch, are present.
Pedrollo TOP 2 Submersible Pump packaging and unit.
3.2 배출 호스 연결하기
Attach a suitable discharge hose to the pump's outlet. Ensure the connection is secure to prevent leaks during operation. The pump is designed to accommodate standard hose sizes.
3.3 펌프 위치 선정
Place the pump on a stable, flat surface in the area to be drained. Ensure the pump is fully submerged in the water before starting. The maximum immersion depth for the TOP 2 model is 3 meters.
Pedrollo TOP 2 Submersible Pump showing the integrated handle and float switch.
3.4 플로트 스위치 조정
The pump features an integrated float switch for automatic start and stop. The float switch activates the pump when the water level rises and deactivates it when the water level drops to a certain point. Ensure the float switch can move freely without obstruction to function correctly.
4. 운영
Once installed, operating the Pedrollo TOP 2 pump is straightforward.
4.1 펌프 시동
After ensuring the pump is correctly positioned and submerged, plug the power cable into a suitable electrical outlet. The integrated float switch will automatically start the pump when the water level reaches the activation point.
4.2 자동 작동
The float switch will automatically turn the pump on and off based on the water level. This feature is ideal for continuous monitoring and draining of fluctuating water levels. The pump will continue to operate until the water level drops to the minimum emptying level of 14 mm from the bottom.
4.3 펌프 정지
To manually stop the pump, simply unplug it from the power outlet. The pump will also stop automatically once the water level falls below the float switch's deactivation point.
5. 유지관리
정기적인 유지관리를 통해 최적의 성능을 보장하고 펌프의 수명을 연장할 수 있습니다.
- 청소: Periodically clean the pump's exterior to remove any debris or sediment. Ensure the intake area is clear of obstructions.
- 플로트 스위치 점검: Regularly check that the float switch moves freely and is not obstructed by debris.
- 임펠러 검사: If the pump's performance decreases, inspect the impeller for blockages. The pump can handle solid particles up to Ø 10 mm. Larger particles may cause damage or blockages.
- 저장: If storing the pump for an extended period, especially in freezing conditions, ensure it is completely drained of water to prevent damage. Store in a dry, protected area.
6. 문제 해결
This section addresses common issues you might encounter with your Pedrollo TOP 2 pump.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | 전원 공급이 없습니다 Float switch not activated 모터 과부하 | 전원 연결 및 회로 차단기를 확인하세요 Ensure water level is high enough to activate float 모터가 식을 때까지 기다린 후 막힘이 있는지 확인하십시오. |
| 물의 흐름이 적거나 없음 | Discharge hose kinked or blocked Pump intake blocked Impeller damaged or clogged | 호스를 확인하고 청소하세요 Clean pump intake screen Disconnect power and inspect/clean impeller |
| 펌프가 지속적으로 작동 | Float switch stuck in 'on' position 지속적인 물 유입 | Check float switch for obstructions Verify the source of water inflow |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 자격을 갖춘 서비스 담당자에게 문의하세요.
7. 사양
Technical details for the Pedrollo TOP 2 Submersible Pump.
클로즈업 view of the Pedrollo TOP 2 Submersible Pump, highlighting the technical label.
- 모델: 상위 2위
- 힘: 0.5마력
- 권tage: 115 볼트
- 최대 침수 깊이: 3 미터
- 최대 액체 온도: +40 °C (for max 3 minutes)
- Sphere Passage (Max Particle Size): 직경 10mm
- Maximum Emptying Level: 14 mm from the bottom
- 재료: 주철
- 전원: Electric cable (5m length supplied)
- 포함된 구성 요소: Integrated float for automatic start/stop
- 크기(패키지): 31.6 x 20.9 x 19.5cm
- 무게(패키지): 5.32kg
- 최대 리프트 높이: 3 미터
8. 공식 제품 영상
No official product videos specifically for the Pedrollo TOP 2 submersible pump from a 'Seller' creator type were found in the provided data. The available video is for a different product (Truper submersible pump) and is therefore not included.
9. 보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Pedrollo customer service directly. Keep your purchase receipt as proof of purchase.
