1. 서론
The RadioMaster Boxer Crush EdgeTX 2.4G 16CH Remote Controller with AG01 Hall Gimbals is a high-performance radio transmitter designed for remote control applications, particularly for drones and other RC vehicles. It features advanced AG01 hall effect gimbals for precise control and comes pre-installed with EdgeTX firmware and an internal ExpressLRS module. This manual provides essential information for setting up, operating, and maintaining your Boxer Crush remote controller.
이미지 1.1: 앞면 view of the RadioMaster Boxer Crush EdgeTX Remote Controller in blue.
2. 안전 정보
Please read and understand all safety warnings before operating this device. Failure to do so may result in injury or damage to the product.
- 배터리 충전: Charging the incorrect type of battery may damage the remote controller and pose a fire hazard. Always use compatible chargers and batteries as specified by the manufacturer.
- 장치를 물과 습기로부터 멀리하십시오.
- 컨트롤러를 분해하거나 개조하지 마십시오. 그렇게 하면 보증이 무효화되고 손상이 발생할 수 있습니다.
- 작동 및 충전 중에는 적절한 환기가 이루어지도록 하십시오.
3. 패키지 내용
Upon opening your RadioMaster Boxer Crush package, please verify that all the following items are included:
- Boxer Crush Radio
- 운반 케이스
- USB-C 케이블
- 배터리 트레이 (배터리는 포함되지 않음)
- 부속품
- 사용자 설명서
Image 3.1: All items included in the RadioMaster Boxer Crush package.
4. 제품 오버view 및 기능
The Boxer Crush is designed for optimal control and user experience. Its compact design ensures excellent ergonomics, making it comfortable for extended use. Key features include:
- CNC Aluminum AG01 Hall-effect Gimbals: Provides precise and smooth control inputs.
- Preinstalled EdgeTX Firmware: Advanced open-source radio firmware for extensive customization.
- Internal ExpressLRS Module: Capable of a 1,000Hz refresh rate for low-latency communication.
- New Low-Profile Latching SE Switch and Momentary SF Switch: Enhanced control options.
- Internal Module Cooling Fan: Built-in to maintain optimal operating temperature.
- 128*64 Monochrome LCD Display: Clear display for settings and telemetry.
5. 사양
Detailed technical specifications for the RadioMaster Boxer Crush:
Image 5.1: Detailed specifications of the Boxer Crush Radio.
| 특징 | 세부 사항 |
|---|---|
| 크기 | 235 x 178 x 77mm |
| 무게 | 617.1g (1.4 파운드) |
| 빈도 | 2.400GHz-2.480GHz |
| 내부 RF | ExpressLRS 2.4GHz |
| 지원되는 프로토콜 | 모듈 종속 |
| 냉각 팬 | 내장(ELRS 버전) |
| 권tag및 범위 | 6.6-8.4V DC |
| 라디오 펌웨어 | EdgeTX (Transmitter) / ExpressLRS (RF module) |
| 채널 | 최대 16개 채널(수신기에 따라 다름) |
| 배터리 | 7.4V 2셀 리튬 폴리머 / 3.7V 18650 리튬 이온 셀 XNUMX개(배터리 미포함) |
| 표시하다 | 128*64 단색 LCD 디스플레이 |
| 짐벌 | AG01 CNC Hall Gimbal |
| 외부 모듈 | JR / FrSKY / Crossfire compatible |
| 업그레이드 방법 | USB / SD card & EdgeTX Companion PC software |
| 제품 치수 | 9.3 x 7 x 3 인치 |
| 원산지 | 중국 |
| 제조업체 권장 연령 | 14세 이상 |
| 제조업체 | 라디오 마스터 |
6. 설정
Follow these steps for the initial setup of your Boxer Crush remote controller:
- 배터리 설치: Open the battery compartment on the back of the controller. Insert the recommended 7.4V 2-cell Lithium-Polymer battery or two 3.7V 18650 Lithium-Ion cells into the battery tray. Ensure correct polarity.
- 충전 중: Connect the included USB-C cable to the controller's USB-C port and to a suitable USB power source. The display will indicate charging status.
- 전원 켜기: Press and hold the power button until the display illuminates. The controller will boot into the EdgeTX firmware.
- 초기 구성: Follow the on-screen prompts for initial setup, including language selection, calibration of gimbals, and setting up basic model profiles. Refer to the EdgeTX documentation for detailed configuration steps.
- 펌웨어 업데이트(선택 사항): It is recommended to periodically check for firmware updates for both EdgeTX and the internal ExpressLRS module to ensure optimal performance and access to new features. Updates can be performed via USB and the EdgeTX Companion PC software.
7. 운영
Understanding the basic operation of your Boxer Crush controller is crucial for effective use:
- 짐발: The AG01 Hall Gimbals control the primary movements (pitch, roll, yaw, throttle) of your RC model. Practice smooth and precise movements.
- 스위치와 손잡이: Utilize the various switches (SA, SB, SC, SD, SE, SF) and knobs (S1, S2, T1, T2, T3, T4) for auxiliary functions, flight modes, and fine-tuning. Refer to your model's setup in EdgeTX for specific assignments.
- 디스플레이 및 탐색: The monochrome LCD displays telemetry data, model settings, and menu options. Use the navigation buttons and scroll wheel to move through menus and adjust parameters.
- 제본: To control an RC model, the controller must be bound to a compatible receiver. Consult your receiver's manual and the EdgeTX documentation for the binding procedure specific to your ExpressLRS setup.
8. 유지관리
Proper maintenance will extend the lifespan and ensure the reliability of your Boxer Crush controller:
- 청소: 컨트롤러 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 강한 화학 약품이나 연마성 재료는 사용하지 마십시오.
- 저장: Store the controller in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- 배터리 관리 : If storing for extended periods, ensure batteries are charged to a storage voltage (typically around 3.8V per cell for LiPo/Li-Ion) to prevent degradation.
- 짐벌 유지보수: The AG01 gimbals are designed for durability, but avoid exposing them to excessive dust or debris. If adjusting tension, proceed carefully to avoid stripping screws.
9. 문제 해결
If you encounter issues with your Boxer Crush controller, consider the following common troubleshooting steps:
- 컨트롤러 전원이 켜지지 않음: Check battery charge level and ensure batteries are correctly installed. Verify the power button is fully pressed.
- 모델로부터 응답이 없습니다. Confirm the controller is bound to the receiver. Check the model's power supply and receiver connection. Ensure the correct model profile is selected on the controller.
- 불규칙한 제어: Recalibrate the gimbals through the EdgeTX system menu. Check for any physical obstructions or damage to the gimbals.
- 디스플레이 문제: If the display is blank or flickering, try restarting the controller. Ensure the battery is adequately charged.
- 펌웨어 문제: If issues persist, consider performing a firmware re-flash using the EdgeTX Companion software. Back up your model settings first.
For more complex issues, refer to the comprehensive EdgeTX documentation online or contact customer support.
10. 보증 및 지원
The RadioMaster Boxer Crush is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official RadioMaster web자세한 보증 약관은 해당 사이트에서 확인하세요.
For technical support, firmware updates, and additional resources, please visit the official RadioMaster support website or contact their customer service department. Online communities and forums dedicated to EdgeTX and ExpressLRS can also be valuable resources for troubleshooting and advanced usage.
Manufacturer: Radiomaster
이 제품은 소규모 업체 브랜드 제품입니다. 많은 관심 부탁드립니다.
