중요 안전 지침
이 히터를 사용하기 전에 모든 지침을 읽으십시오. 지침을 따르지 않을 경우 화재, 감전 또는 부상을 입을 수 있습니다.
- Do not use outdoors. This heater is designed for indoor use only.
- Use only on a firm, level surface to prevent tipping.
- Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front, sides, and rear of the heater.
- Do not use in bathrooms, laundry areas, or similar damp 실내 위치. 욕조나 기타 물통에 떨어질 수 있는 곳에 히터를 두지 마십시오.
- 이 히터는 사용 중 뜨거우니 화상을 입지 않도록 주의하세요. 뜨거운 표면에 맨살이 닿지 않도록 하세요. 히터를 옮길 때는 손잡이를 사용하세요.
- 어린이 또는 환자 근처에서 히터를 사용할 경우와 히터를 작동 상태로 두고 방치할 경우에는 극히 주의가 필요합니다.
- 사용하지 않을 때는 히터의 플러그를 항상 뽑아두세요.
- 손상된 코드나 플러그가 있는 히터나 히터가 오작동하거나, 떨어뜨리거나, 어떤 식으로든 손상된 후에는 히터를 작동하지 마십시오. 히터를 공인 서비스 시설로 돌려보내 검사, 전기 또는 기계적 조정 또는 수리하십시오.
- 카펫 아래로 코드를 놓지 마십시오. 코드를 러그, 러너 또는 이와 유사한 덮개로 덮지 마십시오. 코드를 교통 구역에서 멀리하고 걸려 넘어지지 않는 곳에 정리하십시오.
- 히터를 분리하려면 컨트롤을 OFF로 돌린 다음 콘센트에서 플러그를 뽑습니다.
- 감전이나 화재가 발생하거나 히터가 손상될 수 있으므로 통풍구나 배기구에 이물질을 넣거나 이물질이 들어가지 않도록 주의하세요.
- 화재 가능성을 예방하려면 공기 흡입구나 배출구를 어떤 식으로든 막지 마십시오. 침대와 같이 구멍이 막힐 수 있는 부드러운 표면에서는 사용하지 마십시오.
- 히터는 내부에 뜨겁고 아크 또는 스파크가 발생하는 부분이 있습니다. 가솔린, 페인트 또는 인화성 액체를 사용하거나 보관하는 곳에서는 사용하지 마십시오.
- 이 히터는 이 설명서에 설명된 대로만 사용하십시오. 제조업체에서 권장하지 않는 다른 용도로 사용하면 화재, 감전 또는 인명 상해가 발생할 수 있습니다.
- This heater includes a tip-over safety switch and overheat protection. If the heater tips over or overheats, it will automatically shut off for safety.
- Ensure the power outlet is suitable for the heater's voltage (120 Volts AC) and is properly grounded.
제품 끝view
The Uthfy Space Heater (Model HPC-F2014YL) is a 32-inch electric tower ceramic heater designed for indoor use, providing efficient and rapid heating for areas up to 400 sq.ft. It features a realistic 3D flame effect, 80° oscillation, and multiple control options for personalized comfort and energy efficiency.
Image: The Uthfy Space Heater, a tall black tower unit, is shown with its remote control. The heater emits warm air, indicated by orange wavy lines, and features a realistic flame display at its base.
Image: The Uthfy Space Heater is positioned in a large room, demonstrating its ability to provide widespread heat. Text overlays highlight its 1500W power, 50°F-99°F thermostat range, and 400 sq.ft heating coverage.
구성 요소
- Heater Unit (main body)
- 받침대 (조립 필요)
- 원격 제어
- 사용 설명서 (본 문서)
설정
Follow these steps to properly set up your Uthfy Space Heater for first use:
- 풀다: 모든 구성품을 포장에서 조심스럽게 꺼내십시오. 손상된 부분이 있는지 확인하십시오. 나중에 보관하거나 운반할 수 있도록 포장을 보관하십시오.
- 베이스 조립: The heater unit comes with a detachable base. Attach the two halves of the base together, then align the assembled base with the bottom of the heater unit. Secure it firmly using the provided screws. Ensure the base is stable and the heater stands upright without wobbling.
- 놓기: Place the heater on a firm, level, and non-combustible surface. Ensure it is positioned away from walls, furniture, curtains, and any other combustible materials. Maintain at least 3 feet (0.9 meters) of clear space around the heater for proper airflow and safety.
- 전원 연결: Plug the power cord directly into a grounded 120V AC electrical outlet. Do not use extension cords, power strips, or surge protectors, as these can overheat and pose a fire hazard.
Image: A Uthfy Space Heater stands tall in a living room, with an arrow indicating its 32-inch height. Insets show its 3D flames, fast heating capability, and portable handle, illustrating its design and features.
작동 지침
Your Uthfy Space Heater can be operated conveniently using the touch control panel located on top of the unit or the included remote control.
제어판 및 원격 제어 기능
Image: A close-up of the Uthfy Space Heater's top control panel, showing touch buttons and an LED display. Text highlights its 3 heat modes, 24-hour timer, and 3D realistic flames feature, indicating ease of use.
Image: The Uthfy Space Heater is shown in a living room setting, with a remote control in the foreground, illustrating the convenience of remote operation for adjusting settings like oscillation from a distance.
| 버튼/기능 | 설명 |
|---|---|
| 전원 켜기/끄기 | 히터를 켜거나 끕니다. |
| 방법 | 고온(1500W), 저온(1000W), 그리고 에코 모드 순으로 난방 모드가 전환됩니다. |
| 온도(+/-) | Adjusts the thermostat setting from 50°F to 99°F in 1°F increments. |
| 진동 | Activates or deactivates the 80° oscillation feature for wider heat distribution. |
| 시간제 노동자 | 자동 종료 타이머를 1시간에서 24시간까지 설정합니다. |
| 3D Flame | Turns the realistic 3D flame effect on or off. |
| LED Screen On/Off | Turns the LED display on the control panel on or off for undisturbed sleep. |
히터 사용
- 전원 켜기: Press the Power button on the control panel or remote. The heater will turn on and the LED display will illuminate.
- 난방 모드 선택: Press the "Mode" button repeatedly to cycle between High (1500W), Low (1000W), and ECO modes. ECO mode automatically adjusts power consumption to maintain the set temperature efficiently.
- 설정 온도: Use the "+" or "-" buttons to set your desired room temperature. The heater will cycle on and off to maintain this temperature, saving energy.
- 진동 활성화: Press the "Oscillation" button to enable the 80° oscillation feature, which helps distribute warm air more evenly across the room. Press again to stop oscillation.
- 타이머 설정 : Press the "Timer" button repeatedly to set the desired auto-off time, ranging from 1 to 24 hours. The heater will automatically turn off after the set duration.
- 화염 효과: Press the "3D Flame" button to turn the realistic flame effect on or off independently of the heating function.
- LED 디스플레이: If desired, press the "LED Screen On/Off" button to turn off the LED display on the control panel for a darker room, especially at night.
- 전원 끄기 : Press the Power button again to turn off the heater. The heater will continue to run its fan for approximately 30 seconds to dissipate residual heat from the ceramic elements before fully shutting down, which helps prolong the product's lifespan.
Image: The Uthfy Space Heater is shown in a dimly lit bedroom, emphasizing its features for a restful night's sleep, including manual screen-off, 1-24 hour timer, and soothing white noise for quiet operation.
유지
Regular maintenance is crucial for ensuring the optimal performance, efficiency, and longevity of your Uthfy Space Heater.
청소
- 전원 분리: Always unplug the heater from the electrical outlet and allow it to cool completely for at least 30 minutes before attempting any cleaning.
- 외부 청소: 부드러운 d를 사용하세요amp cloth to wipe the exterior surfaces of the heater. For stubborn marks, a mild soap solution can be used, but ensure no liquid enters the heater. Do not use abrasive cleaners, chemical solvents, or flammable liquids, as these can damage the finish or create a fire hazard.
- 공기 흡입/배기: Use a vacuum cleaner with a brush attachment to gently remove dust and lint from the air intake and exhaust grilles. This prevents dust buildup that can impede airflow and reduce heating efficiency. Do not allow water or cleaning solutions to drip into the heater's interior.
저장
When storing the heater, especially during off-season periods, follow these guidelines:
- Unplug the heater and allow it to cool completely.
- Clean the heater thoroughly as described in the "Cleaning" section.
- Store the heater in its original packaging, if possible, to protect it from dust and damage. If original packaging is unavailable, use a sturdy box and protective materials.
- Store the heater in a cool, dry place, away from direct sunlight, excessive moisture, and extreme temperatures.
- Do not place heavy objects on top of the heater during storage, as this could cause damage to the unit.
문제 해결
If your Uthfy Space Heater is not operating correctly, consult the following table for common issues and their corresponding solutions. If the problem persists after attempting these solutions, please contact customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 히터가 켜지지 않습니다. | No power to the unit; Power button not pressed; Tip-over switch activated; Overheat protection activated. | Ensure plug is fully inserted into a working 120V AC outlet. Press the Power button firmly. Place heater on a firm, level surface. If overheat protection activated, unplug, wait 10 minutes for cooling, then plug back in. |
| 히터가 예기치 않게 꺼집니다. | Tip-over switch activated; Overheat protection activated; Timer set; Power surge. | Ensure heater is on a stable, level surface. Check for obstructions to air flow around the heater. Unplug, wait 10 minutes, then plug back in. Verify if the auto-off timer is set. |
| 열이 없거나 열이 충분하지 않습니다. | Incorrect mode selected; Thermostat set too low; Air inlets/outlets blocked; Room size exceeds heating capacity. | Select High (1500W) mode for maximum heat. Increase the thermostat setting to a higher temperature. Clear any dust or obstructions from air grilles. Ensure room size is within 400 sq.ft. |
| 진동이 작동하지 않습니다. | 진동 기능이 활성화되지 않았습니다. | Press the Oscillation button on the control panel or remote to activate the feature. |
| 리모컨이 작동하지 않습니다. | Batteries are dead or incorrectly inserted; Obstruction between remote and heater; Remote sensor blocked. | Replace batteries (ensure correct polarity). Remove any physical obstructions between the remote and the heater. Point remote directly at the heater's sensor. |
Image: An illustration demonstrating the Uthfy Space Heater's safety features, including a 45-degree tip-over protection mechanism that automatically shuts off the unit, and a temperature gauge showing overheat protection thresholds for safe operation.
명세서
Technical specifications for the Uthfy Space Heater (Model HPC-F2014YL):
| 특징 | 세부 사항 |
|---|---|
| 상표 | 우피 |
| 모델 번호 | HPC-F2014YL |
| 치수(D x W x H) | 8.58인치 깊이 x 8.58인치 너비 x 31.2인치 높이 |
| 품목 무게 | 6.64파운드 |
| 색상 | 검은색 |
| 폼 팩터 | 탑 |
| 실내/실외 사용 | 실내 |
| 난방 범위 | 300-400 Sq.ft |
| 열 출력 | 1500와트(높음), 1000와트(낮음) |
| 연료 유형 | 전기 같은 |
| 권tage | 120볼트(AC) |
| 온도 조절기 범위 | 50°F - 99°F (1°F increment) |
| 진동 | 80° |
| 시간제 노동자 | 1~24시간 후 자동 꺼짐 |
| 특별 기능 | 3D Realistic Flame, Remote & Touch Control, Delayed Heat Dissipation, Quiet Operation, Overheat and Tip-over Protection, V0 Flame-Retardant Material |
| 인증 | ETL 인증 |
| 조립이 필요합니다 | Yes (Base) |
| 필요한 배터리(리모컨용) | 예 |
보증 및 지원
For warranty information or technical support regarding your Uthfy Space Heater, please refer to the contact details provided with your product packaging or visit the official Uthfy web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하는 것이 좋습니다.
For common questions and immediate assistance, please refer to the troubleshooting section of this manual.
제품 비디오
No official product videos from the seller are available for embedding at this time. Please refer to the detailed instructions and images provided in this manual for guidance.
