OFFNOVA 21홀 제본기 사용 설명서

1. 서론

구매해주셔서 감사합니다asing the OFFNOVA 21-Hole Binding Machine. This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your new binding machine. Please read this manual thoroughly before use and keep it for future reference.

Figure 1: OFFNOVA 21-Hole Binding Machine. This image shows the complete binding machine with its dual-arm handle and the comb binding mechanism.

2. 안전 지침

• 항상 안정적이고 평평한 표면에서 기계를 작동하세요.
• 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
• Do not attempt to bind materials thicker than the specified maximum capacity.
• Keep the machine away from water or other liquids.
• Do not allow children to operate the machine without adult supervision.
• Ensure the punching lever is fully depressed during punching to prevent paper jams.
• Clean the machine regularly as instructed in the Maintenance section.

3. 패키지 내용

모든 품목이 들어 있는지 확인하기 위해 상자를 푼 후 패키지 내용물을 확인하세요.

• 1 x OFFNOVA 21-Hole Binding Machine (Model CD12)
• 100 x 0.95 cm (3/8 inch) Black Comb Spines
• 1 x Comb Protector
• 1 x Oil Absorbent Paper Sheet

Figure 2: Included accessories and machine dimensions. This image illustrates the machine's dimensions and shows the oil absorbent paper and the box of 100 black comb spines that are included with the product.

4. 제품 오버view

Familiarize yourself with the main components of the OFFNOVA Binding Machine:

• Dual-Arm Handle: Designed for improved efficiency and reduced effort during punching.
  

  Figure 3: Dual-Arm Handle. This image highlights the ergonomic dual-arm handle, designed for effortless punching and binding.

• Punch Margin Adjustment Knob: Allows customization of the paper margin (3mm, 4mm, 5mm) for professional-looking documents.
  

  Figure 4: Punch Margin Adjustment. This image shows the knob for adjusting the punch margin to 3mm, 4mm, or 5mm.

• Paper Slider / Edge Guide: Ensures precise alignment for Letter, A4, and A5 paper formats.
  

  Figure 5: Paper Slider and Size Lock. This image demonstrates how the paper slider locks the paper size, indicating hole counts for A5 (15 holes), Letter (19 holes), and A4 (21 holes).
• Punching Mechanism: Advanced cutting blade for effortless paper punching.
  

  Figure 6: Punching Blade Mechanism. This image provides a detailed view of the "Offset on another" blade design, which facilitates effortless punching.

• Comb Binding Mechanism: Located at the top, used to open and close comb spines for binding.
• 칩 트레이: Collects paper chads from punching.

5. 설정

The OFFNOVA Binding Machine comes fully assembled for immediate use. Follow these steps before your first binding project:

1. 기계 포장 풀기: Carefully remove the binding machine and all accessories from the packaging.
2. 초기 청소: Before first use, clean the machine with the included oil absorbent paper. Punch at least 8 times with the oil absorbent paper to remove any pre-lubrication residue and prevent staining your documents.
3. 안정된 표면에 놓으십시오: Position the machine on a flat, stable, and clean surface.

6. 사용 설명서

The binding process involves two main steps: punching and binding.

6.1 Punching Documents

1. Adjust Paper Margin: Use the punch margin adjustment knob (Figure 4) to set the desired margin depth (3mm, 4mm, or 5mm) based on your document's requirements.
2. Set Paper Size: Adjust the paper slider/edge guide (Figure 5) to align with your paper size (Letter, A4, or A5) for precise hole alignment.
3. 용지 삽입: Insert up to 10-12 sheets of 80g paper, 2 sheets of 230g cover paper, or 1 sheet of 5-12mm PVC cover into the punching slot. Ensure the paper is flush against the edge guide.
4. 펀치: Firmly press the dual-arm punching lever down completely and without pause. Releasing the lever mid-punch can cause paper jams.
5. 반복하다: Remove the punched sheets and repeat the process until all pages are punched.

Note: For optimal results and to prevent paper jams, always press the punching handle all the way down without stopping.

Figure 7: Punching and Binding Capacity. This image illustrates the maximum punch capacity of 12 sheets of 80g paper and a maximum binding capacity of 450 sheets using 2-inch comb bindings.

6.2 Binding Documents

1. Open Comb Spine: Place a comb spine onto the binding mechanism's teeth. Pull the dual-arm handle towards you to open the comb spine.
2. Insert Punched Pages: Carefully slide the punched pages onto the open comb spine, starting with the front cover, followed by the document pages, and finally the back cover. Ensure all pages are correctly aligned on the comb.
3. Close Comb Spine: Push the dual-arm handle away from you to close the comb spine, securing the document.
4. Remove Document: Carefully remove the bound document from the machine.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your binding machine:

• Empty Chip Tray: Regularly empty the chip tray located at the bottom of the machine to prevent accumulation of paper chads, which can interfere with punching.
• 깨끗한 블레이드: Periodically punch the included oil absorbent paper (or a few sheets of scrap paper) to clean the punching blades and remove any paper dust or residue.
• 닦아내다: Use a soft, dry cloth to wipe down the exterior of the machine. Do not use abrasive cleaners or solvents.
• 저장: When not in use, store the machine in a clean, dry place, away from direct sunlight and extreme temperatures.

8. 문제 해결

9. 사양

10. 보증 및 지원

Specific warranty details for this product are not provided in this manual. For warranty information, technical support, or service inquiries, please contact OFFNOVA customer service or refer to the product's purchase documentation.

일반적으로 제조업체의 공식 연락처 정보를 찾을 수 있습니다. web제품을 구매한 소매업체나 사이트를 통해서도 구매 가능합니다.