DYNASTY PROAUDIO TMP-1 Professional Vacuum Tube Microphone Preamp리미터가 있는 liifier

소개

The DYNASTY PROAUDIO TMP-1 is a professional vacuum tube microphone preamplifier designed to enhance audio signals with warmth and clarity. It features a 12AX7 vacuum tube, 48V phantom power, and a built-in limiter, making it suitable for a variety of recording and live sound applications with both condenser and dynamic microphones, as well as instruments.

안전 지침

• 작동하기 전에 모든 지침을 주의 깊게 읽으십시오.
• 본 제품을 비나 습기에 노출시키지 마십시오.
• c를 열지 마세요asing. 모든 서비스는 자격을 갖춘 담당자에게 의뢰하세요.
• 과열을 방지하려면 적절한 환기를 유지하세요.
• Use only the specified power adapter (AC 9V).
• Disconnect power before cleaning or when not in use for extended periods.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• TMP-1 Professional Vacuum Tube Microphone Preamp리퍼
• Power Adapter (AC 9V)
• 사용 설명서 (본 문서)

제품 끝view

The TMP-1 features a robust design with intuitive controls for optimal audio processing.

이 이미지는 각도를 보여줍니다 view of the DYNASTY PROAUDIO TMP-1 Professional Vacuum Tube Microphone Preamplifier. The front panel with controls and indicators is visible, along with the sturdy black casing.

이 이미지는 클로즈업을 제공합니다 view of the TMP-1's front panel. It clearly displays the "OUTPUT LEVEL" LED indicators, "Gain Input" and "Drive" rotary knobs, and push-buttons for "Phantom Power", "Limit", "Phase", and "Gain".

This image shows the rear panel of the TMP-1, highlighting the input and output connections. It includes XLR and 1/4-inch (6.35mm) input jacks, XLR and 1/4-inch (6.35mm) output jacks, and the AC 9V power input.

전면 패널 컨트롤 및 표시기

• OUTPUT LEVEL LEDs: Indicators for signal level (-10, -5, 0, +3, +6dB Peak).
• Gain Input Knob: Adjusts the input gain from minimum to maximum.
• Drive Knob: Controls the amount of tube saturation/drive.
• Phantom Power Button (ON/OFF): 콘덴서 마이크용 48V 팬텀 전원을 활성화/비활성화합니다.
• Limit Button (ON/OFF): Engages/disengages the built-in limiter to prevent clipping.
• Phase Button (Reverse/Normal): Reverses the phase of the input signal.
• Gain Button (+20dB/Normal): Provides an additional +20dB gain boost.

후면 패널 연결

• INPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) inputs for microphones or instruments.
• OUTPUT (XLR & 1/4-inch): Balanced XLR and unbalanced 1/4-inch (6.35mm) outputs for connecting to mixers, audio interfaces, or other audio devices.
• 교류 9V: 동봉된 AC 어댑터의 전원 입력부입니다.

설정

1. 전원 연결: Connect the supplied AC 9V power adapter to the "AC 9V" input on the rear panel of the TMP-1, then plug the adapter into a suitable power outlet.
2. 입력 연결:
   • For microphones: Connect your microphone to either the XLR or 1/4-inch INPUT jack on the rear panel.
   • For instruments: Connect your instrument (e.g., guitar, bass) to the 1/4-inch INPUT jack.
3. 출력 연결: Connect the TMP-1's XLR or 1/4-inch OUTPUT to your mixer, audio interface, or recording device's input.
4. 초기 설정: Before powering on, ensure the "Gain Input" and "Drive" knobs are set to their minimum positions. Ensure "Phantom Power" is OFF unless using a condenser microphone.

This image shows the TMP-1 preamplifier with various audio cables connected to its input and output jacks, demonstrating a typical setup.

작동 지침

전원 켜기

Once all connections are made, power on the TMP-1. The "Power" LED on the front panel will illuminate.

팬텀 파워 사용

If you are using a condenser microphone, press the 팬텀 파워 button to activate 48V phantom power. The corresponding LED will light up. Warning: Do not activate phantom power when using dynamic microphones or ribbon microphones, as this can cause damage.

입력 게인 조정

천천히 돌리세요 게인 입력 knob clockwise to increase the input signal level. Monitor the "OUTPUT LEVEL" LEDs. Aim for the signal to primarily light up the -5 and 0 dB LEDs during normal operation, with occasional peaks into the +3 dB LED. Avoid consistently hitting the +6dB Peak LED, which indicates clipping.

Applying Drive (Tube Saturation)

그만큼 운전하다 knob controls the amount of tube saturation. Turn it clockwise to add warmth and harmonic richness to your signal. Experiment with this control to find the desired sonic character.

Using the Limiter

를 누르세요 한계 button to engage the built-in limiter. This helps prevent signal peaks from exceeding a certain level, protecting your recording equipment from clipping and providing a more consistent output level.

위상 반전

그만큼 단계 button allows you to reverse the phase of the input signal. This can be useful in multi-microphone setups to correct phase cancellation issues or for creative effects.

Additional Gain Boost

If your input signal is very low, you can press the 얻다 button to apply an additional +20dB gain boost. Use this judiciously to avoid introducing unwanted noise or distortion.

This image shows a close-up of a glowing vacuum tube, representing the 12AX7 tube inside the TMP-1 that provides its characteristic warmth.

This image features a professional condenser microphone in a studio environment, illustrating the type of microphone that benefits from the TMP-1's phantom power and preamp합리화.

This image shows hands playing a bass guitar, demonstrating the TMP-1's versatility in handling instrument-level signals.

유지

• 청소: 부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 액체 세척제나 용제는 사용하지 마세요.
• 저장: 본 제품은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 튜브 교체: The 12AX7 vacuum tube has a finite lifespan. If you notice a degradation in sound quality or increased noise over time, the tube may need replacement. This should be performed by qualified service personnel.

문제 해결

명세서

• 모델: TMP-1
• 튜브 타입 : 12AX7 Vacuum Tube
• 팬텀 파워 : +48V(전환 가능)
• 입력: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
• 출력: XLR Balanced, 1/4-inch (6.35mm) Unbalanced
• 전원 공급 장치: AC 9V (included adapter)
• 제품 크기: 9.5 x 6 x 3.5인치(24.13 x 15.24 x 8.89cm)
• 품목 무게: 2.6파운드(1.18kg)
• 제조업체: Dynasty Proaudio
• 첫 이용 가능 날짜: 19년 2024월 XNUMX일

보증 및 지원

For warranty information and technical support, please contact DYNASTY PROAUDIO directly.

Visit the official DYNASTY PROAUDIO Store on Amazon for more information: DYNASTY PROAUDIO Store

보증 청구를 위해 구매 증명서를 보관하십시오.