1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your APC Smart-UPS SMT750RM2UC. This Uninterruptible Power Supply (UPS) is designed to provide reliable power and surge protection for critical electronic equipment.
2. 안전 정보
Read these instructions carefully before attempting to install, operate, service, or maintain this equipment. Adhere to all warnings and operating instructions.
- This UPS contains internal batteries and may present a shock hazard even when disconnected from the AC power source.
- 배터리 서비스는 배터리 및 필요한 예방 조치에 대해 잘 아는 사람이 수행하거나 감독해야 합니다.
- 배터리를 불 속에 버리지 마십시오. 배터리가 폭발할 수 있습니다.
- 배터리를 열거나 훼손하지 마십시오. 방출된 전해질은 피부와 눈에 해롭습니다. 독성이 있을 수 있습니다.
- 배터리는 감전 및 높은 단락 전류의 위험을 초래할 수 있습니다.
- UPS는 항상 접지된 콘센트에 연결하세요.
- UPS를 의료 또는 생명 지원 장비에 사용하지 마세요.
3. 패키지 내용
Verify that all components are present upon receipt. Contact your dealer if any items are missing or damaged.
- APC Smart-UPS SMT750RM2UC Unit
- 16GB USB 3.0 Drive
- Rackmount installation hardware
- 문서 CD
- USB 통신 케이블
- 직렬 통신 케이블
- 전원 코드
4. 제품 특징
The APC Smart-UPS SMT750RM2UC offers advanced features for power protection and management:
- Efficient Power Protection: Provides 750VA/500W of line-interactive pure sine wave power in a 2U rackmount design, suitable for servers, storage systems, network closets, and POS systems.
- 권tage Stability Assurance: 자동 볼륨tage Regulation (AVR) corrects utility voltage fluctuations, ensuring a stable power supply to connected devices.
- 원격 모니터링 기능: Features a SmartConnect Ethernet Port for cloud-based remote power monitoring, firmware upgrades, diagnostics, and email notifications.
- Flexible Shutdown Options: Supports graceful shutdown via serial or USB cables using PowerChute Serial Shutdown software, or through an optional Network Management Card for seamless shutdown of physical and virtual servers.
- Included 16GB USB Drive: A 16GB USB drive is included for data storage or file 이전.
5. 설정
5.1 물리적 설치
The SMT750RM2UC is a 2U rackmount unit. Ensure proper ventilation and secure mounting within a standard 19-inch rack.
1단계: Install the rackmount rails (if not pre-installed) into your server rack according to the rail manufacturer's instructions.
2단계: Carefully slide the UPS unit onto the installed rails until it clicks into place. Secure the front of the UPS to the rack using the provided screws.
3단계: Ensure adequate clearance for airflow around the front and rear of the unit.
5.2 연결
Connect your equipment to the UPS as follows:
- 입력 전력: Connect the UPS input power cord (NEMA 5-15P) to a grounded utility power outlet.
- 출력 연결 : Connect your critical equipment (servers, network devices, etc.) to the 6 x NEMA 5-15R output receptacles on the rear of the UPS.
- 통신 포트:
- USB 포트: Connect the provided USB cable from the UPS to your computer for local monitoring and graceful shutdown via PowerChute software.
- 시리얼 포트 : Connect the provided serial cable for local monitoring and graceful shutdown via PowerChute software.
- SmartConnect Ethernet Port: Connect an Ethernet cable to this port for cloud-based remote monitoring and management.
- SmartSlot: An optional slot for installing accessories like a Network Management Card for advanced network-based management.
5.3 초기 전원 켜기
모든 연결이 완료된 후:
- Press the power button on the front panel of the UPS.
- The LCD display will illuminate, and the UPS will perform a self-test.
- Allow the UPS to charge its batteries for at least 24 hours before relying on it for extended backup power.
6. 운영
6.1 LCD 디스플레이 및 제어
The front panel LCD provides real-time status information and allows for configuration of UPS settings. Use the navigation buttons (Esc, Up, Down, Enter) to browse menus and adjust parameters.
- 상태 표시기 : Display battery charge, load level, and operational mode.
- 구성: 출력 볼륨 조정tage, sensitivity, alarm settings, and more.
- 자가 진단: Initiate a battery self-test to check battery health.
6.2 자동 볼륨tage 규정(AVR)
UPS는 미미한 전압 변동을 자동으로 보정합니다.tage fluctuations (sags and surges) without switching to battery power, preserving battery life and ensuring a stable power supply to connected equipment.
6.3 SmartConnect Port
The SmartConnect port enables cloud-based monitoring of your UPS. Once connected to your network and registered, you can access UPS status, receive alerts, and perform basic management tasks from a web 브라우저 또는 모바일 앱.
6.4 정상적인 종료
전원이 확장된 경우tage, the UPS can initiate a graceful shutdown of connected servers and virtual machines using PowerChute software (via USB or Serial) or an optional Network Management Card (via SmartSlot). This prevents data loss and ensures system integrity.
7. 유지관리
7.1 배터리 관리 및 교체
The UPS contains a sealed, maintenance-free lead-acid battery. Batteries typically last 3-5 years under normal operating conditions. Replace batteries when the UPS indicates a battery fault or when runtime significantly decreases.
- Refer to the full user manual for detailed battery replacement instructions.
- Always use genuine APC replacement battery cartridges (RBCs) to ensure compatibility and optimal performance.
- 오래된 배터리는 책임감 있게 재활용하세요.
7.2 청소
Periodically clean the exterior of the UPS with a soft, damp cloth. Ensure ventilation openings are free from dust and debris to maintain proper airflow.
8. 문제 해결
This section provides solutions to common issues. For more complex problems, consult the full user manual or APC technical support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| UPS가 켜지지 않습니다. | Not connected to utility power; Battery not connected; Low battery charge. | Ensure power cord is securely plugged in; Check internal battery connections; Allow UPS to charge for several hours. |
| UPS에서 계속해서 경고음이 울립니다. | 배터리 전원 사용 중; 과부하 상태; 배터리 부족. | Check utility power; Reduce connected load; Allow battery to charge or replace if faulty. |
| "Replace Battery" indicator is on | 배터리 수명이 다했거나 고장났습니다. | Perform a battery self-test; Replace the battery cartridge if necessary. |
9. 사양
Key technical specifications for the APC Smart-UPS SMT750RM2UC:
- 모델: SMT750RM2UC
- 폼 팩터: 2U 랙마운트
- 출력 전력 용량: 750VA / 500와트
- 출력 연결 : 6 x NEMA 5-15R
- 입력 연결: NEMA 5-15P
- 공칭 입력 Voltage: 120V
- 공칭 출력 볼륨tage: 120V
- 토폴로지: 라인 인터랙티브
- 파형 유형: 사인파
- 치수(높이 x 너비 x 깊이): 3.39인치(8.6cm) x 17.01인치(43.2cm) x 16.10인치(40.9cm)
- 순중량: 39.02파운드(17.7kg)
- 포함된 액세서리: 16GB USB 3.0 Drive
10. 보증 및 지원
APC는 본 제품에 대해 표준 보증을 제공합니다. 구체적인 보증 조건은 제품에 동봉된 보증 카드를 참조하거나 APC 공식 웹사이트를 방문하십시오. web대지.
For technical support, product registration, or to download the latest software and documentation, please visit the APC support portal or contact APC customer service.
온라인 리소스: APC 지원 Web대지
