소개
구매해주셔서 감사합니다asing the Mytrix M16 Leverless Arcade Controller. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly to ensure optimal performance and longevity of your controller.
패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- Mytrix M16 Leverless Arcade Controller
- USB-C 케이블
- 키캡 풀러
- 사용자 설명서
- Extra Low Profile Red Switches (x2)
- Extra Keycaps (x2)
Image: Contents of the Mytrix M16 package, including the controller, USB-C cable, keycap puller, manual, two extra switches, and two extra keycaps.
설정 및 호환성
The Mytrix M16 controller offers wide compatibility across various platforms. Ensure your device is updated to the latest firmware for best performance.
시스템 요구 사항
- PC: Windows 10 and above, Steam Deck, Raspberry Pi, MiSTer, Linux
- 콘솔: PS3, PS4, 닌텐도 스위치
- Mobile/Other: Android, iPadOS, MacOS
- 메모: For PlayStation 5 and Xbox consoles, an additional adapter is required (not included).
Image: Visual representation of the Mytrix M16 controller's compatibility with various platforms including PS5, PS4, PS3, PC, Switch, Steam, Arcade, and Xbox (with adapter).
초기 연결
- 제공된 USB-C 케이블을 컨트롤러의 USB-C 포트에 연결하십시오.
- Connect the other end of the USB-C cable to your desired gaming platform (PC, console, etc.).
- 컨트롤러는 대부분의 호환 시스템에서 자동으로 인식되어야 합니다.
작동 지침
The Mytrix M16 features a GP-2040-CE chip for ultra-low latency and various control modes.
제어 모드
The controller supports multiple input modes:
- X-입력 모드
- 스위치 모드
- PS3/D-input mode
- PS4 모드
- 키보드 모드
Button Layout and Key Values
Refer to the diagram and table below for the standard button layout and corresponding key values across different modes.
Image: Diagram showing the button layout of the Mytrix M16 controller and a table detailing key values for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes.
특수 기능
- 터보 기능 : Activates rapid fire for selected buttons. Consult the web configuration for specific setup.
- SOCD Cleaning Modes: Supports various Simultaneous Opposite Cardinal Direction cleaning modes to prevent conflicting directional inputs. Configurable via web 인터페이스.
- M1/M2 Custom Buttons: Two customizable buttons for advanced control.
RGB 조명
The controller features customizable RGB lighting with 4 preset modes.
Image: The Mytrix M16 controller displaying various RGB backlight colors, illustrating the 4 preset modes.
Custom RGB Lighting Controls
Adjust RGB lighting using the following button combinations:
- SELECT + START + X: Next Animation
- SELECT + START + Y: Previous Animation
- SELECT + START + A: 밝기 업
- SELECT + START + B: 밝기 낮추기
- SELECT + START + RB: LED Parameter Up
- SELECT + START + RT: LED Parameter Down
- SELECT + START + LB: Pressed Parameter Up
- SELECT + START + LT: Pressed Parameter Down
Image: A visual guide to customizing RGB lighting on the Mytrix M16 controller, showing various color options and control combinations.
유지 관리 및 맞춤 설정
The Mytrix M16 is designed for easy maintenance and extensive customization.
핫스왑 가능 스위치
The controller uses Gateron Low Profile Red Switches, which are hot-swappable. This allows you to replace switches without soldering.
- 스위치 유형: 게이트론 로우 프로file 빨간색 스위치
- 수명: 50만
- 작동력 : 약 45g
- 이동 거리: 3.2mm
- 작동 지점: 1.5mm
이미지: 클로즈업 view of the Gateron Low Profile Red Switches on the Mytrix M16 controller, highlighting their hot-swappable nature.
Detachable 7-Layer Design
The controller features a 7-layer detachable board design, enabling customization of the keyboard's graphics and internal components.
이미지: 폭발 view of the Mytrix M16 controller, showing its 7-layer detachable design for customization, including ABS keycaps, acrylic sheets, switches, and PCB board.
DIY Screen & Artwork Support
Personalize your controller with custom artwork and screen displays.
이미지: 전amples of custom artwork and screen displays on the Mytrix M16 controller, demonstrating DIY customization possibilities.
일반 청소
To clean your controller, use a soft, dry cloth. Avoid abrasive cleaners or solvents. For deeper cleaning, the detachable layers allow access to internal components.
문제 해결
This section addresses common issues you might encounter with your Mytrix M16 controller.
연결 문제
- Controller not detected: USB-C 케이블이 컨트롤러와 기기에 제대로 연결되어 있는지 확인하십시오. 다른 USB 포트나 케이블을 사용해 보세요.
- No data flow: If the controller powers on but is not recognized by any system (Windows, PopOS, consoles), attempt to access the web 구성자.
Web Configuration Access
The Mytrix M16 features a built-in embedded web configuration interface for advanced settings and firmware updates.
- 잡아라 시작 button while plugging the device into your computer.
- The controller should enter a special mode, often displaying an IP address on its small screen.
- 열기 web browser on your computer and navigate to the displayed IP address.
- If the browser times out or no device is connected, ensure your computer's network settings allow connection to local devices.
Double Inputs or Unresponsive Buttons
- Double inputs: This can sometimes be caused by outdated firmware. Access the web configurator to check for and install the latest firmware updates.
- 응답하지 않는 버튼: The controller supports hot-swappable switches. If a specific button is unresponsive, try replacing its switch with one of the included spares using the keycap puller.
펌웨어 업데이트
Firmware updates are crucial for optimal performance and resolving potential issues. The Mytrix M16 uses an open-source GP2040-CE firmware.
- 업데이트하기 전에: It is highly recommended to back up your current settings and take screenshots of all web configurator pages. Firmware updates can sometimes reset settings or change interface elements.
- Post-update issues: If LEDs or the screen are deactivated after an update, you may need to re-enable them through the web configurator, as default firmware settings might disable these features.
- Refer to the official GP2040-CE documentation for detailed instructions on firmware updates and configuration.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | M16 |
| 치수(길이 x 너비 x 높이) | 27cm x 20cm x 1cm (10.63" x 7.87" x 0.39") |
| 무게 | 1.92파운드(약 0.87kg) |
| 칩셋 | GP-2040-CE (40nm process technology) |
| 숨어 있음 | 최소 1ms |
| 스위치 | 게이트론 로우 프로file Red Switches (Hot-swappable) |
| RGB 조명 | 4 preset modes, customizable colors |
| 사용자 정의 | 7-layer detachable design, DIY artwork support |
| 제어 모드 | X-input, Switch, PS3/D-input, PS4, Keyboard |
| 특별 기능 | Turbo function, SOCD cleaning, M1/M2 custom buttons, embedded web 구성 |
Image: Diagram illustrating the physical dimensions of the Mytrix M16 controller: 27 cm (10.63") length, 20 cm (7.87") width, and 1 cm (0.39") thickness.
보증 및 지원
Mytrix is committed to providing quality products and customer satisfaction. For technical support, warranty claims, or any inquiries, please contact Mytrix customer service.
- 고객 서비스: Refer to the Mytrix official web연락처 정보는 해당 사이트 또는 구매 플랫폼에서 확인하세요.
- 보증: Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty services.
