소개
Thank you for choosing the Vrabocry DC 5V/12V/24V 17 Key RF Wireless Remote LED Controller. This device is designed to provide versatile control over your 5050, 3528, and 5630 LED strip lights, offering a range of static colors and dynamic modes. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
안전 정보
- 입력 볼륨을 확인하세요tage (5V, 12V, or 24V) matches your LED strip lights and power supply. Incorrect voltage can damage the controller and LED strips.
- Do not expose the controller or remote to moisture or extreme temperatures.
- 연결 또는 분리 작업을 하기 전에 전원을 차단하십시오.
- 본 제품은 실내에서만 사용하도록 설계되었습니다.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
패키지에는 다음 품목이 포함됩니다.
- 1 x RF Mini RGB Controller
- 1 x 17-Key RF Wireless Remote (CR2025 battery not included)
- 1 x 사용자 설명서
설정
1. 컨트롤러 연결
- Connect your LED strip light to the 4-pin output connector of the RF Mini RGB Controller. Ensure the polarity is correct (usually indicated by arrows or markings).
- Connect a compatible DC 5V/12V/24V power supply to the input jack of the RF Mini RGB Controller.
- 전원을 연결하기 전에 모든 연결이 안전한지 확인하세요.
Image: The Vrabocry RF Mini RGB Controller connected to its 17-key wireless remote. The controller has a white cable with a 4-pin connector for LED strips and a power input jack.
2. 리모컨 배터리 설치
The 17-key RF Wireless Remote requires one CR2025 button battery (not included).
- Locate the battery tray on the back of the remote control.
- Gently push the small tab and pull out the battery tray.
- 새 CR2025 배터리를 양극(+)이 위를 향하게 하여 삽입하세요.
- 배터리 트레이를 딸깍 소리가 나면서 제자리에 고정될 때까지 리모컨 안으로 다시 밀어 넣으세요.
Image: The back of the 17-key RF Wireless Remote, illustrating the battery compartment for a CR2025 battery. Instructions for opening and inserting the battery are visible.
작동 지침
The 17-key RF Wireless Remote allows for comprehensive control of your LED strip lights. The remote operates using a 433MHz wireless signal, providing control without direct line-of-sight.
이미지: 앞면 view of the 17-key RF Wireless Remote Control, displaying all buttons and their labels for various functions.
원격 제어 기능:
| 단추 | 기능 |
|---|---|
| 대기 | Turns the LED lights on or switches to standby mode. |
| MODE+ / MODE- | Switches between 9 dynamic modes or transitions from static lighting to dynamic modes. |
| 속도+ / 속도- | 다이내믹 모드의 속도를 조절합니다(5단계). |
| BRIGHT+ / BRIGHT- | Adjusts the brightness of static colors or dynamic modes. |
| COLOR+ / COLOR- | Cycles through 20 static colors. Can also switch from dynamic mode to a static color. |
| SINGLE COLOR SELECT | Directly selects specific static colors: White, Red, Green, Blue, Yellow, Cyan, Pink. |
| 데모 | Activates a demonstration mode cycling through various dynamic effects. |
동적 모드:
The controller offers 9 dynamic modes, including effects such as strobe, breathing, fading in and out, slow flashing, and flickering. Use the 모드+ 그리고 방법- buttons to cycle through these effects.
정적 색상:
There are 20 static colors available. Use the COLOR+ 그리고 COLOR- buttons to select your desired color, or use the dedicated single color buttons for quick access to primary colors.
유지
- 청소: Use a soft, dry cloth to clean the controller and remote. Do not use liquid cleaners or solvents.
- 배터리 교체: Replace the CR2025 battery in the remote control when its range decreases or it stops responding. Refer to the "Remote Control Battery Installation" section for instructions.
- 저장: 장기간 사용하지 않을 때는 기기를 서늘하고 건조한 곳에 보관하세요.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| LED strip lights do not turn on. | 컨트롤러에 전원이 공급되지 않습니다. 잘못된 연결. 리모컨 배터리가 방전되었습니다. | 전원 공급 장치 연결을 확인하세요. Verify LED strip and power supply connections are secure and correct polarity. 원격 배터리를 교체하십시오. |
| 리모컨이 작동하지 않습니다. | 배터리가 방전되었거나 잘못 설치되었습니다. 리모컨이 컨트롤러에서 너무 멀리 떨어져 있습니다. | Replace CR2025 battery, ensuring correct polarity. Move closer to the controller. The RF signal has a typical range, but obstacles can reduce it. |
| LED colors are incorrect or flickering. | 연결이 느슨함. Incompatible LED strip type. | Check all 4-pin connections for the LED strip. Ensure your LED strip is a common anode RGB type compatible with this controller. |
명세서
- 권tage: 5V - 24V 직류
- 작동 전류: 12A / 3 channels (4A per channel)
- 작동 온도: -20°C ~ 60°C (-4°F ~ 140°F)
- 컨트롤러 크기: 약 1.6 x 0.5 x 0.2mm(40 x 12.7 x 5인치)
- RGB 제어: 3 output channels, common anode+
- 정적 색상: 20
- 동적 모드: 9
- 속도 레벨: 5
- 제어 방법: 433MHz RF Wireless
- Remote Battery Type: CR2025(포함되지 않음)
보증 및 지원
Vrabocry products are designed for reliability and performance. For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official Vrabocry web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
본 설명서에 나와 있지 않은 문제가 발생할 경우 고객 지원팀에 문의하여 도움을 받으십시오.
