TRITON-D10 통합 진단 시스템용 IPG ProActive 화면 보호기 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, care, and maintenance of your IPG ProActive Screen Protector for the TRITON-D10 Integrated Diagnostic System 10.1-inch display. This screen protector is engineered with 9H hardness nano ceramic film, offering ultra-responsive touch, high clarity, and protection against scratches, smudges, and shocks.

The IPG ProActive screen protector package shown alongside the protector applied to a TRITON-D10 diagnostic system.

클로즈업 view of the IPG ProActive screen protector seamlessly applied to the 10.1-inch display of the TRITON-D10 Integrated Diagnostic System.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• IPG ProActive Screen Protector (for TRITON-D10 10.1-inch display)
• 청소용 천
• Installation Card / Squeegee
• Dust-removal Stickers
• 가이드 스티커
• Handle Sticker

3. 설정 및 준비

Before beginning the installation process, ensure you have a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the screen or protector.

3.1 추천 도구

• Small bowl of water mixed with a drop of dishwashing detergent (for wet application)
• Soft, lint-free cloth (included)
• Installation card / squeegee (included)

3.2 Screen Protector Layers

This diagram details the five protective layers of the IPG ProActive screen protector: Anti-Fingerprint, Hydraulic Layer, Impact Resistant, HD Glass Layer, and Adhesive Layer.

The IPG ProActive screen protector features multiple layers for enhanced durability and performance. These include an anti-fingerprint coating, a hydraulic layer, an impact-resistant layer, an HD glass layer, and a strong adhesive layer.

3.3 Flexibility

The image shows the screen protector being bent, highlighting its flexible and durable nano ceramic film construction.

The nano ceramic film construction provides significant flexibility, making the protector resistant to cracking and shattering, unlike traditional tempered glass protectors.

4. 설치 지침

Follow these steps carefully for optimal installation. A wet application method is recommended for best results.

4.1 비디오 가이드

4.2 단계별 가이드

A visual guide outlining the six key steps for proper installation of the IPG ProActive screen protector on a device display.

1. 표면 청소: Use the provided IPG cloth to thoroughly clean the TRITON-D10 display. Ensure there is no dust, smudges, or fingerprints remaining.
2. 솔루션 준비: In a small bowl, mix water with a tiny drop of dishwashing detergent. This solution will help with positioning and bubble removal.
3. Wet Fingertips: Lightly wet your fingertips with the prepared solution.
4. Peel from Backing: Carefully peel the IPG screen protector from its backing. Avoid touching the adhesive side with dry fingers.
5. 젖은 접착면: Spray or dab the prepared solution onto the adhesive side of the screen protector. This allows for repositioning.
6. 정렬 및 적용: Carefully align the screen protector with the TRITON-D10 display. Once aligned, gently lay it down onto the screen.
7. 거품을 스퀴지로 제거하세요: Use the provided installation card (squeegee) to gently push out any water and air bubbles from the center towards the edges. Wrap the squeegee in the cleaning cloth to prevent scratching the protector.
8. 최종 초기화: Once all bubbles are removed, use the IPG cloth to wipe off any excess solution from the screen protector and the device.

팁: If any bubbles remain, you can gently lift the nearest edge of the IPG protector and reapply, then squeegee again. Allow 12-24 hours for the protector to fully adhere and any remaining moisture to evaporate, which may initially appear as a slight haze.

5. 관리 및 유지 보수

To ensure the longevity and clarity of your IPG ProActive Screen Protector, follow these care guidelines:

• 청소: Use a soft, lint-free cloth (like the one provided) to gently wipe the screen. For stubborn smudges, lightly damp천에 물이나 화면에 안전한 세척제를 묻혀 닦아주세요. 강한 화학 물질이나 연마재는 사용하지 마세요.
• 날카로운 물체를 피하십시오: While the protector is scratch-resistant, extreme pressure from sharp objects can still cause damage.
• 온도: Avoid exposing the device to extreme temperatures, as this can affect the adhesive.

A split image showcasing the exceptional high clarity of the screen protector, allowing for an unobstructed view of the display content.

6. 문제 해결

6.1 일반적인 문제 및 해결 방법

• Bubbles or Haze After Installation:
      해결책: Small bubbles or a slight haze are normal immediately after wet application. These typically disappear within 12-24 hours as the solution dries. For larger bubbles, gently lift the nearest edge of the protector and re-squeegee the area.
• Dust Particles Under the Protector:
      해결책: This usually occurs if the screen was not perfectly clean before application. If noticeable, you may need to carefully lift the protector, use a dust-removal sticker to pick up the particle, re-wet the adhesive side, and reapply.
• 가장자리가 잘 붙지 않음:
      해결책: Ensure enough solution was applied to the edges during installation. After squeegeeing, press down firmly on the edges with your finger or the cloth-wrapped squeegee for a few minutes to help them adhere. Allow sufficient drying time.
• 터치 감도 저하:
      해결책: The IPG ProActive protector is designed for ultra-responsive touch. If you experience reduced sensitivity, ensure the protector is fully adhered and dry. If the issue persists, verify that the protector is correctly installed and not interfering with the device's sensors.

7. 사양

8. 보증 및 지원

IPG ProActive products are designed for quality and durability. For specific warranty information regarding your screen protector, please refer to the documentation included with your product or visit the official IPG website. For technical support, installation assistance, or any product-related inquiries, please contact IPG customer service through their official channels.

You can visit the IPG Store for more information: IPG Store on Amazon