소개
This manual provides instructions for the installation, operation, and maintenance of your Xtreme Smart Wi-Fi Window & Door Sensor. This device is designed to enhance home security by detecting the opening and closing of windows and doors, sending instant notifications to your smartphone.
안전 정보
- 기기를 극한의 온도, 직사광선 또는 습기에 노출시키지 마세요.
- 기기를 직접 분해하거나 수리하지 마십시오. 보증이 무효화됩니다.
- 배터리는 어린이의 손이 닿지 않는 곳에 보관하십시오. 삼켰을 경우 즉시 의사의 진료를 받으십시오.
- 배터리는 지역 규정에 따라 폐기하십시오. 사용한 배터리와 새 배터리를 혼용하지 마십시오.
- Ensure the installation surface is clean and dry for proper adhesive attachment.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Xtreme Smart Wi-Fi Window & Door Sensor (Main Unit)
- Xtreme Smart Wi-Fi Window & Door Sensor (Magnetic Contact)
- 사용 설명서 (본 문서)
Image: The main sensor unit and the smaller magnetic contact unit.
설치 가이드
1. 배터리 설치
- Gently slide open the battery cover on the main sensor unit.
- AAA 배터리 2개(별도 구매)를 배터리 칸에 넣을 때, 극성(+/-)을 정확히 확인하십시오.
- 배터리 덮개를 단단히 닫으세요.
Image: The main sensor unit with its battery compartment open, showing where to insert two AAA batteries.
2. 앱 다운로드 및 계정 생성
- 다운로드 Xtreme Connect Home App from the Apple App Store (for iOS 11 or higher) or Google Play Store (for Android 7.0 or higher).
- 앱을 열고 화면의 지시에 따라 새 계정을 만들거나 이미 계정이 있는 경우 로그인하세요.
Image: The product box illustrating the Xtreme Connect Home App download options for both iOS and Android devices.
3. 기기 페어링
- Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The sensor does not support 5GHz networks.
- In the Xtreme Connect Home App, tap the "+" icon to add a new device.
- Select "Sensor" or "Door/Window Sensor" from the device list.
- Follow the app's instructions to put the sensor into pairing mode (usually involves pressing and holding a button on the sensor until an indicator light flashes).
- Confirm the Wi-Fi network and enter the password in the app. The sensor will then connect to your home network.
- Once successfully paired, you can name your sensor within the app (e.g., "Front Door," "Bedroom Window").
4. 물리적 설치
The sensor consists of two parts: a main unit and a smaller magnetic contact. These two parts must be installed close to each other (within 1 cm) on a door or window frame.
- Choose a clean, dry, and flat surface on your door or window frame.
- Peel off the protective backing from the adhesive on both the main unit and the magnetic contact.
- Attach the main unit to the fixed part of the door/window frame.
- Attach the magnetic contact to the moving part of the door/window (the door or window itself), aligning it with the main unit so they are no more than 1 cm apart when the door/window is closed.
- Test the installation by opening and closing the door/window. The app should register the change in status.
Image: Left: The sensor installed on a window sill with the window closed. Right: The sensor detecting an open window, with the magnetic contact separated from the main unit.
작업
Monitoring Door/Window Status
Once installed and paired, the Xtreme Smart Wi-Fi Window & Door Sensor will continuously monitor the open/closed status of your designated entry point. When the magnetic contact separates from the main unit (door/window opens), the sensor will detect this change.
즉각적인 알림
Upon detecting an open or close event, the sensor will send an instant notification to your smartphone via the Xtreme Connect Home App. Ensure app notifications are enabled in your phone's settings to receive these alerts.
원격 접속
당신은 할 수 있습니다 view the current status of your sensor (open or closed) and review event history from anywhere using the Xtreme Connect Home App, provided your smartphone has an internet connection.
Smart Scenes Integration
The Xtreme Connect Home App allows you to create "Smart Scenes" to automate actions based on sensor activity. For examp르 :
- "If door opens, then turn on living room lights."
- "If window opens after 10 PM, then send an alert to family members."
Explore the "Smart Scenes" section within the app to customize your home automation.
유지
배터리 교체
The sensor is powered by two AAA batteries. When the battery level is low, you may receive a notification via the Xtreme Connect Home App. To replace batteries:
- Gently slide open the battery cover on the main sensor unit.
- 오래된 배터리를 제거하세요.
- 극성(+/-)을 확인하여 AAA 알칼리 건전지 2개를 새로 넣으십시오.
- 배터리 덮개를 단단히 닫으세요.
Note: The sensor is designed for up to four months of battery life under normal usage conditions.
청소
센서를 부드럽고 마른 천으로 닦으십시오. 액체 세척제나 연마성 물질은 기기를 손상시킬 수 있으므로 사용하지 마십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 센서가 Wi-Fi에 연결되지 않습니다. | Incorrect Wi-Fi password; 5GHz network used; sensor too far from router. | Ensure correct 2.4GHz Wi-Fi network and password. Move sensor closer to the router. Re-attempt pairing. |
| 아무런 알림도 받지 못했습니다. | App notifications disabled; sensor offline; app not running in background. | Check phone's notification settings for the Xtreme Connect Home App. Verify sensor status in the app. Ensure app is allowed to run in the background. |
| Sensor not detecting open/close. | Sensor parts misaligned; dead batteries. | Ensure the main unit and magnetic contact are within 1 cm when closed. Replace batteries if low. |
| 배터리 수명이 짧습니다. | Frequent activations; poor quality batteries. | Use high-quality alkaline batteries. Reduce unnecessary activations if possible. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | XHS7-2001-WHT |
| 전원 | AAA 배터리 2개(포함되지 않음) |
| 배터리 유형 | 알칼리성 |
| 권tage | 1.5볼트(DC) |
| 연결성 | 2.4GHz 802.11n Wi-Fi, Bluetooth 4.0 (optional) |
| 제어 방법 | App (Xtreme Connect Home) |
| 호환 OS | Android 7.0 이상, iOS 11 이상 |
| 장착 유형 | Adhesive / Wall Mount |
| 제품 치수 | 2.7 x 2.4 x 4.6 인치 |
| 품목 무게 | 2.39 온스 |
| 색상 | 하얀색 |
| 한국어: | 805106232399 |
보증 및 지원
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Xtreme Digital Lifestyle Accessories website. Do not attempt to return the product to the retailer without first contacting customer support, as per manufacturer guidelines.
제조업체: 익스트림
상표: 익스트림 디지털 라이프스타일 액세서리
