1. 서론
This manual provides detailed instructions for the safe and effective use of the Aideepen 1800W DC-DC Boost Converter. This module is designed to step up a direct current (DC) input voltage from 10V-60V to an adjustable output voltage of 12V-90V, with a maximum output power of 1800W and output current up to 22A. It features robust protection mechanisms and an efficient cooling system, making it suitable for various high-power applications.
2. 안전 정보
- Always ensure correct input and output polarity. Reverse connection can damage the module and connected devices.
- 최대 입력량을 초과하지 마십시오.tage (60V) or output current (22A).
- This is a non-isolated module. If connecting in series or parallel, use independent power sources for each module.
- Before applying power, double-check all wiring connections to prevent short circuits.
- Operate in a well-ventilated area. The module generates heat during operation, especially under high loads.
- Avoid touching the module components during operation, as they may become hot.
- In case of any abnormality, immediately disconnect power and inspect the connections.
- Conduct simulation testing with a resistive load before connecting sensitive or critical equipment.
3. 제품 특징
- 넓은 입력 볼륨tag전자 범위: 10V ~ 60V DC.
- 조정 가능한 출력 볼륨tag전자 범위: 12V ~ 90V DC.
- 높은 출력 전력: 최대 1800와트.
- High Output Current: Adjustable from 1.5A to 22A.
- 통합 보호: Input overcurrent protection, short circuit protection, input reverse connection protection, and low battery protection.
- 효율적인 냉각 시스템: Features an air-blade type cooling fan with hydraulic bearing for balanced noise and heat dissipation. The fan activates automatically when the load temperature reaches approximately 60 degrees Celsius.
- Multi-turn Potentiometers: Ensures precise and stable voltage 및 현재 조정.
4. 사양
| 매개변수 | 값 |
|---|---|
| 입력 Voltag및 범위 | 10V - 60V 직류 |
| 출력 볼륨tag및 범위 | 12V - 90V DC (Adjustable) |
| 최대 출력 전력 | 1800와트 |
| 입력 전류 | 최대 40A |
| 출력 전류 | 1.5A - 22A (Adjustable) |
| 능률 | 최대 98.1% |
| 작동 온도 | Industrial grade (ensure heat dissipation above 40°C ambient) |
| 치수 | 크기는 약 13cm x 5cm (5.1인치 x 1.97인치)입니다. |
| 무게 | 14.4온스(약 412.5g) |
| 모델 번호 | 2_GXJA0008-007 |
5. 제품 오버view 및 구성 요소
The Aideepen 1800W DC-DC Boost Converter features clearly labeled terminals and adjustment potentiometers for ease of use. Below is an illustration of the main components and their functions.
Image 1: Product Wiring Diagram. 이 이미지는 상단을 표시합니다. view of the boost converter module, highlighting key connection points and adjustment components. These include the Input+ and Input- terminals, Output+ and Output- terminals, fuse wire, output voltage regulation potentiometer, output current regulation potentiometer, input indicator light, overcurrent indicator, undervoltage indicator light, and input low cell protective regulation.
Image 2: Temperature Control Fan. This image shows the underside of the boost converter, revealing the integrated cooling fan. The fan is designed to activate automatically when the module's load temperature reaches approximately 60 degrees Celsius, ensuring optimal heat dissipation and extending product lifespan.
6. 설정 지침
Follow these steps to set up your Aideepen 1800W DC-DC Boost Converter:
- 볼륨 확인tage 호환성: Confirm that your input power supply's voltage is within the 10V-60V range and that your desired output voltage is achievable within the 12V-90V range.
- 도구 준비: Gather necessary tools such as wire cutters, wire strippers, insulation tape, and a multimeter for testing.
- 입력 배선: Connect the positive (+) and negative (-) terminals of your power supply to the module's input terminals (labeled VIN or Input+ / Input-). Ensure correct polarity.
- 출력 배선: Connect your load to the module's output terminals (labeled VOUT or Output+ / Output-). For initial testing, it is recommended to use an appropriate resistive load to prevent damage to sensitive equipment from incorrect settings.
- Initial Wiring Check: Before applying power, meticulously verify all wiring connections. Ensure there are no loose wires or potential for short circuits. Keep wiring neat and organized.
7. 사용 설명서
Once the module is wired, proceed with operation and adjustment:
- Power-Up Test: Slowly increase the input power. Observe the module's working status. Use a multimeter to measure the output voltage to confirm it reaches the expected value. If any abnormality is detected, immediately turn off the power for inspection.
- 출력 볼륨 조정tage: 볼륨이 있는 경우tage adjustment is required, use the multi-turn potentiometer labeled for output voltage regulation. Turn clockwise to increase voltage, counter-clockwise to decrease. Adjust gradually while monitoring with a multimeter.
- Adjust Output Current (if applicable): If constant current operation is desired, use the multi-turn potentiometer labeled for output current regulation. Adjust to set the desired current limit.
- 부하 테스트: After confirming correct voltage and current settings, connect your actual load. Monitor the load's operation and the module's temperature rise to ensure stable performance. The integrated fan will activate automatically if the module's temperature reaches approximately 60°C.
8. 유지관리
The Aideepen 1800W DC-DC Boost Converter is designed for durability. Regular maintenance is minimal but important for longevity:
- 깨끗하게 유지하십시오: Periodically inspect the module for dust accumulation, especially on the heatsink and fan. Use compressed air or a soft brush to gently clean.
- 환기를 보장하십시오: Always operate the module in an environment with adequate airflow to facilitate heat dissipation. Avoid enclosing it in tight spaces without ventilation.
- 온도 모니터링: While the fan is automatic, it is good practice to monitor the module's temperature during prolonged high-load operation. If temperatures consistently exceed safe limits, consider additional cooling.
- 연결 무결성: 정기적으로 모든 배선 연결부의 조임 상태와 마모 또는 부식 여부를 점검하십시오.
9. 문제 해결
이 섹션에서는 여러분이 겪을 수 있는 일반적인 질문과 문제에 대해 설명합니다.
Image 3: Frequently Asked Questions. This image presents a table of common questions and answers regarding the boost converter's operation, efficiency, protection features, and adjustment.
- 모듈의 전원이 켜지지 않음:
- 입력 볼륨 확인tage: Ensure it is within 10V-60V.
- Verify input polarity: Incorrect polarity will prevent operation.
- Check fuse: A blown fuse indicates an overcurrent event or short circuit. Replace if necessary.
- 출력 볼륨tage is Incorrect or Unstable:
- 출력 볼륨 조정tag전위차계를 조심스럽게 다루세요.
- Ensure the load is not drawing excessive current beyond the module's capacity (22A max).
- 느슨한 연결이나 잘못된 배선을 확인하세요.
- 모듈 과열:
- 적절한 환기를 확인하십시오.
- Verify the cooling fan is operating when the module is under load and warm.
- Reduce the load if operating continuously at maximum power, especially in ambient temperatures above 40°C.
- Short Circuit Protection Activated:
- The module has short-circuit protection. If activated, the fuse may blow. Replace the fuse and identify the cause of the short circuit before re-applying power.
- 입력 역방향 연결 보호:
- The module is designed with reverse connection protection. If input polarity is reversed, the module will not operate but should not be damaged. Correct the polarity.
10. 응용 프로그램
The Aideepen 1800W DC-DC Boost Converter is versatile and can be used in various applications, including:
- High-power solar street lamp 운전.
- Various LED lighting constant voltage (CV) driving.
- Vehicle-mounted and mobile device power supplies.
- DIY adjustable constant voltage (CV) and constant current (CC) power supplies.
- Solar power charging systems.
- Charging various types of batteries.
11. 보증 및 지원
Each Aideepen product comes with a 24개월 서비스 보증. If you encounter any quality issues with your item, you are eligible for a new replacement. For assistance with application, troubleshooting, or any other inquiries, please feel free to contact Aideepen customer support.
