PowMr 3600W 태양광 인버터 사용 설명서

1. 제품 오버view

The PowMr 3600W Solar Inverter is a versatile off-grid solution designed to convert 24V DC power from batteries into 110V AC pure sine wave electricity. It integrates a 120A MPPT solar charge controller and an 80A AC charger, making it suitable for various solar power applications. This unit supports multiple battery types, including AGM, Gel, Lead-acid, Lithium-ion, and LiFePO4, and can operate in a batteryless mode.

그림 1.1: 전면 view of the PowMr 3600W Solar Inverter, showcasing the LCD display and control buttons.

2. 주요 특징

• 고성능 출력: Rated 3.6kW pure sine wave output, converting 24V DC to 110V AC.
• 고급 MPPT 컨트롤러: Features a 120A MPPT solar charge controller with a maximum PV input power of 4200W and 500Vdc.
• 유연한 충전: Includes an 80A AC charger, supporting a max hybrid charging current (AC + PV) of 120A.
• 배터리 호환성: Compatible with AGM, Gel, Lead-acid, Lithium-ion, and LiFePO4 batteries. Supports batteryless operation.
• 사용자 친화적인 디스플레이: LED display provides real-time system information and allows adjustment of input voltage range, battery charging current, and AC/solar charging priority.
• 종합 보호: Equipped with dual cooling fans for efficient heat dissipation and multiple protections including short circuit, over/under voltage, overload, reverse polarity, and over-temperature.
• 통신 인터페이스: Supports RS485 and RS232 communication.

Figure 2.1: Visual representation of the inverter highlighting key technical specifications such as 3.6kW/24V, 97% conversion efficiency, and 120A max solar charge current.

3. 설정 및 설치

Proper installation is crucial for the safe and efficient operation of your PowMr solar inverter. Please follow these steps carefully. It is recommended to have a qualified electrician perform the installation.

3.1 인버터 장착

1. Determine a suitable, well-ventilated installation location, away from direct sunlight, moisture, and flammable materials.
2. Secure the inverter to a sturdy wall using two screws through the mounting holes located at the top of the inverter. Ensure it is level and firmly attached.

Figure 3.1: The PowMr 3600W Solar Inverter securely mounted on a wall, ready for wiring connections.

3.2 배터리 연결

Before connecting the battery, ensure the inverter is turned off and all circuit breakers are open.

1. Connect the positive (+) and negative (-) cables from your 24V battery bank to a suitably rated DC circuit breaker.
2. Remove the port cover at the bottom of the inverter by unscrewing the four screws. This exposes the connection terminals.
3. Connect the positive (+) and negative (-) cables from the DC circuit breaker to the corresponding battery terminals on the inverter. Ensure correct polarity to prevent damage from reverse connection.
4. 배터리 용량 확인tage is within the acceptable range for the inverter (typically 24V nominal).

Figure 3.2: The inverter connected to a 24V battery, illustrating the battery terminals and the DC circuit breaker.

3.3 PV 어레이 연결

Connect your solar panels (PV array) to the inverter. Ensure the PV array's voltage와 전류는 인버터 사양 내에 있습니다.

1. Connect the positive (+) and negative (-) cables from your PV array to the positive and negative PV input ports of the inverter.
2. 모든 연결부가 단단히 조여졌는지, 그리고 극성이 올바른지 다시 한번 확인하십시오.

3.4 AC 입력 및 출력 연결

The inverter can be connected to utility power or a generator for charging and backup.

1. Connect the utility power or generator to the AC input port of the inverter.
2. Connect your loads to the main AC output port.
3. If utilizing the dual output smart management feature, connect secondary loads to the secondary AC output port. This feature allows for stable power supply to the secondary output line.

3.5 전원 켜기

1. After all connections are made and verified, replace the port cover on the inverter.
2. 배터리 회로 차단기를 닫으세요.
3. Power on the inverter using its main power switch.
4. If the inverter shows no abnormalities, sequentially activate the PV input, AC input, and AC output lines.

4. 작동 모드

The PowMr 3600W Solar Inverter offers flexible operating modes to suit various energy needs.

4.1 충전 모드

이 인버터는 세 가지 충전 모드를 지원합니다.

• 태양광 전용: 배터리 충전에 태양광 발전을 우선시합니다.
• Mains Only: Uses utility power (AC grid) for battery charging.
• 전력 및 태양광 혼합형: Combines both solar and utility power for efficient battery charging.

4.2 부하 출력 모드

The inverter provides three load output working modes:

• 유틸리티 우선순위: 부하에 전력을 공급하기 위해 전력망의 우선순위를 정합니다.
• 태양광 우선 순위: 전력 수요에 태양광 발전을 우선적으로 공급합니다.
• Solar and SBU Priority: Prioritizes solar power, then battery, then utility power for loads.

Figure 4.1: Flowchart depicting the various charging and load output priority modes available on the inverter.

5. Configurable Settings via LCD Display

The integrated LED display provides real-time system information and allows users to customize various operational parameters.

• 입력 Voltag전자 범위: Adjust the acceptable input voltage range for utility power.
• 배터리 충전 전류: Set the desired battery charging current based on your battery type and capacity.
• AC and Solar Charging Priority: Configure the priority between AC and solar charging sources.

Figure 5.1: The LCD display interface, illustrating options for adjusting AC/Solar charger priority, battery charging current, and input voltag전자 범위.

6. 응용 프로그램

The PowMr 3600W Solar Inverter is designed for a wide range of applications, providing reliable power in various settings.

• 주거용 사용: Powering homes and essential appliances.
• Commercial Photovoltaic Applications: Supporting small to medium commercial power needs.
• Agricultural Applications: Providing power for farm equipment and remote agricultural sites.
• 비상 백업: Ensuring power continuity during outages for critical systems.

그림 6.1: 예amples of the inverter's applications, including residential, commercial, agricultural, and emergency backup scenarios.

7. 기술 사양

8. 안전 정보

부상 및 인버터 또는 연결된 장비의 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.

• 모든 배선 작업은 자격을 갖춘 전문가가 수행하고 지역 전기 규정을 준수해야 합니다.
• Do not connect or disconnect wires while the system is live. Always disconnect power sources (PV, battery, AC input) before servicing.
• Avoid installing the inverter in areas with high humidity, dust, or flammable gases.
• 인버터의 접지가 적절히 되어 있는지 확인하세요.
• Do not attempt to open or repair the inverter yourself. Refer to authorized service personnel.
• Keep children away from the inverter and wiring.

Figure 8.1: The inverter's built-in protection mechanisms, including short circuit, over current, over voltag전자, 권 아래tage, overload, backfill, over-temperature, and over charge protection.

9. 유지관리

정기적인 유지보수는 인버터의 수명 연장과 최적의 성능을 보장하는 데 도움이 됩니다.

• 청소: Periodically clean the exterior of the inverter and ensure the cooling vents are free from dust and debris. Use a dry, soft cloth.
• 연결 확인: Regularly inspect all electrical connections (battery, PV, AC input/output) for tightness and signs of corrosion.
• 환경 점검: 설치 환경이 지정된 온도 및 습도 범위 내에 유지되도록 하십시오.
• 펌웨어 업데이트: 제조사 확인해보세요 website for any available firmware updates to improve performance or address issues.

10. 문제 해결

이 섹션에서는 발생할 수 있는 일반적인 문제에 대한 안내를 제공합니다. 복잡한 문제의 경우 고객 지원팀에 문의하십시오.

11. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the official PowMr website or contact their customer service directly. Keep your purchase receipt and product serial number handy for faster assistance.

제조업체: 파워미스터

Web대지: PowMr Official Store on Amazon