1. 서론
Thank you for choosing the SilverStone NovaPeak 240 ARGB All-in-one Liquid Cooler. This product is designed to provide efficient cooling for your Intel or AMD processor while offering customizable ARGB lighting effects. This manual provides essential information for proper installation, operation, and maintenance of your liquid cooler.
Image 1.1: SilverStone NovaPeak 240 ARGB Liquid Cooler with two ARGB fans and pump head.
2. 안전 정보
Please read and understand the following safety precautions before installation and operation:
- 설치하기 전에 시스템의 전원이 꺼져 있고 벽면 콘센트에서 플러그가 뽑혀 있는지 확인하십시오.
- 손상을 방지하기 위해 구성품을 조심스럽게 다루십시오.
- Do not attempt to open or modify the liquid cooler components.
- 제품을 습기와 극한의 온도에 노출시키지 마십시오.
- If any leakage is observed, immediately power off your system and contact support.
3. 패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- NovaPeak 240 ARGB Liquid Cooler (Radiator, Pump, Tubing)
- 2x 120mm ARGB Radiator Fans
- Mounting Hardware for Intel LGA 115x/1200/1700/1851/2011/2066 sockets
- Mounting Hardware for AMD AM5/AM4 sockets
- ARGB 컨트롤러
- 열전도 페이스트
- 사용자 설명서
4. 설치 가이드
Follow these steps carefully for proper installation. Refer to your motherboard and PC case manuals for specific guidance on component placement.
4.1. 라디에이터와 팬을 준비하세요
- Attach the two 120mm ARGB fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically exhausting air out of the case).
- Connect the fan PWM and ARGB cables. The NovaPeak fans feature a modular cabling design for streamlined connectivity, allowing daisy-chaining.
Image 4.1: Fans connected via daisy-chain for simplified cable management.
4.2. 라디에이터 설치
- Mount the radiator assembly into your PC case. Common mounting locations include the top or front of the case. Secure it with the appropriate screws.
이미지 4.2: 측면 view of the radiator with fans attached.
4.3. Prepare the CPU and Pump
- Clean the CPU surface thoroughly to remove any old thermal paste or debris.
- CPU의 통합 방열판(IHS) 중앙에 소량의 써멀 페이스트(완두콩 크기 정도)를 바르십시오.
Image 4.3: The pump's copper baseplate, designed for firm contact with the processor.
4.4. Mount the Pump to the CPU
- 사용 중인 CPU 소켓(인텔 또는 AMD)에 맞는 장착 브래킷을 선택하십시오.
- Attach the chosen bracket to the pump head.
- Carefully place the pump head onto the CPU, aligning the mounting holes.
- Secure the pump head to the motherboard using the provided screws and backplate (if required for your socket type). Tighten screws in a diagonal pattern until snug.
4.5. 케이블 관리
- Connect the pump's 3-pin power cable to an available fan header on your motherboard (often labeled 'AIO_PUMP' or 'CPU_OPT').
- Connect the ARGB cables from the fans and pump to the included ARGB controller.
- Connect the ARGB controller to a SATA power connector from your power supply and to a 3-pin 5V ARGB header on your motherboard (if you wish to control lighting via motherboard software).
- Organize all cables to ensure proper airflow and a clean build.
5. 운영
Once installed, the NovaPeak 240 ARGB Liquid Cooler operates automatically based on your system's thermal load. The pump and fans will adjust their speed to maintain optimal CPU temperatures.
5.1. ARGB 조명 제어
The included ARGB controller allows you to cycle through 10 lighting modes, adjust brightness, and change light speed. Alternatively, if connected to a compatible motherboard ARGB header, you can control the lighting effects using your motherboard's synchronization software.
이미지 5.1: 펌프 헤드의 클로즈업 사진asing ARGB lighting.
6. 유지관리
정기적인 유지관리를 통해 액체 쿨러의 최적의 성능과 수명을 보장할 수 있습니다.
- 먼지 청소: 압축 공기나 부드러운 브러시를 사용하여 라디에이터 핀과 팬 날개의 먼지를 주기적으로 청소하십시오. 청소하는 동안 팬이 회전하지 않도록 하십시오.
- 튜빙 검사: Visually inspect the tubing for any signs of kinks, damage, or leaks.
- 펌프 소음: The pump is designed for quiet operation. If unusual noises occur, ensure proper mounting and contact support if the issue persists.
7. 문제 해결
문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 높은 CPU 온도 | Improper thermal paste application, loose pump mounting, insufficient airflow, pump failure. | Reapply thermal paste, check pump mounting, ensure fans are correctly oriented, verify pump is powered. |
| 팬이 회전하지 않음 / ARGB 조명이 켜지지 않음 | Incorrect cable connections, faulty ARGB controller, insufficient power. | Check all PWM and ARGB connections, ensure SATA power is connected to the controller, test with different ARGB header if possible. |
| 펌프에서 이상한 소음이 납니다 | 순환 회로에 기포가 생겼거나 펌프가 고장났습니다. | Orient the radiator higher than the pump if possible to allow air to collect in the radiator. If noise persists, contact support. |
8. 사양
Key technical specifications for the SilverStone NovaPeak 240 ARGB Liquid Cooler:
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | SST-NP240-ARGB |
| 라디에이터 재질 | 알류미늄 |
| 펌프베이스소재 | 구리 |
| 팬 속도 | 500 - 2,200 RPM (PWM 제어) |
| 소음 수준 | 12.1dB(최소) |
| 호환 소켓 | Intel LGA 115x/1200/1700/1851/2011/2066, AMD AM5/AM4 |
| 배관 길이 | 460mm |
| 펌프 설계 | Three-phase, six-pole motor |
Image 8.1: The pump's three-phase, six-pole motor design for smooth and quiet operation.
9. 보증 및 지원
SilverStone Technology provides a limited warranty for this product. Please refer to the official SilverStone web자세한 보증 약관은 웹사이트 또는 제품 포장을 참조하십시오.
For technical support, troubleshooting assistance, or warranty claims, please visit the official SilverStone Technology support page or contact their customer service directly. You can find contact information on their web대지: www.silverstonetek.com
