1. 이상view
The TOPPING E2X2 is a high-performance USB audio interface designed for recording and mixing on various platforms including PC, Mac, iPhone, and Android devices. It features an ultra-linear microphone preamp, 48V phantom power, low-noise circuitry, and real-time monitoring capabilities, making it suitable for music production and podcasting.
주요 특징
- Ultra-Linear Microphone Preamp: Equipped with a self-developed preamp module, offering an Equivalent Input Noise (EIN) as low as -130.5dBu for minimal background noise.
- 48V 팬텀 파워: Supports both condenser and dynamic microphones.
- Low Noise Reference Voltage Module (LNRD): Provides a stable power supply for the AD/DA chip, ensuring pure audio transmission with high Input DNR (ADC) of 118dB and Output DNR (DAC) of 115dB.
- 강력한 헤드폰 Amp정수기: Features the NFCA-LE module with a noise floor of 0.9uVrms and 1-ohm output impedance, offering two gain adjustments (up to +17dBu) and 580mW x 2 @ 32 Ohm output for professional headphones.
- Real-Time Monitoring & Mixer Control: Zero-latency hardware monitoring system and four 8-channel input mixers, 6 DAW channels, and 4 LoopBack channels for efficient audio management.
- 다양한 호환성: Compatible with Windows, Mac, iOS, and Android via Type-C connection.
2. 설정
2.1 패키지 내용
시작하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.
2.2 장치에 연결하기
- 전원 및 데이터 연결: Connect the E2X2 to your computer (PC or Mac) or mobile device (iPhone or Android) using the provided USB Type-C cable. The E2X2 draws power and transmits data through this single connection.
- 마이크/악기 연결: Plug your microphone into the XLR/TRS combo inputs (IN1 L or IN2 R) on the front panel. If using a condenser microphone, activate the 48V phantom power by pressing the corresponding 48V button. For instruments, use a 1/4-inch TS cable and press the "INST" button for instrument-level input.
- 헤드폰 연결: 전면 패널에 있는 6.35mm 헤드폰 잭에 헤드폰을 연결하세요.
- 스피커 연결: Connect your studio monitors or speakers to the Line Out (1L and 2R) jacks on the rear panel using 1/4-inch TRS cables.
2.3 드라이버 및 소프트웨어 설치
For Windows users, it is recommended to install the dedicated TOPPING control software and drivers for optimal performance. Mac and iOS devices typically offer class-compliant operation, meaning no additional drivers are required, though the control software may provide enhanced functionality. Refer to the official TOPPING web최신 드라이버 및 소프트웨어 다운로드 사이트입니다.
3. 운영
3.1 전면 패널 컨트롤
- MON(모니터) 노브: 각 입력 채널의 모니터링 레벨을 조정하십시오.
- 48V 버튼: Activate phantom power for condenser microphones. An indicator light will illuminate when active.
- INST(악기) 버튼: Switch the input to instrument level for direct connection of guitars or other instruments.
- 입력/출력 레벨 미터: LED 표시등은 입력 및 출력 신호 레벨을 표시하여 클리핑 현상을 방지하는 데 도움을 줍니다.
- 모니터 노브: 스튜디오 모니터로 출력되는 전체 출력 레벨을 조절합니다.
- 게인 노브: 각 마이크/악기 채널의 입력 게인을 조정하십시오.
- INPUT/PLAYBACK Button: Toggles between monitoring the input signal directly (zero-latency) or the playback signal from your computer/DAW.
- 헤드폰 출력: 6.35mm jack for connecting headphones. The headphone volume is controlled by the MONITOR knob when in playback mode, or by the individual MON knobs for direct monitoring.
3.2 실시간 모니터링
The E2X2 features a zero-latency hardware monitoring system. This allows you to hear your input signal directly through your headphones or speakers without any delay, which is crucial for recording. Use the INPUT/PLAYBACK button to switch between monitoring your live input and the audio playing back from your software.
3.3 Mixer Control
The E2X2 includes a comprehensive mixer control system accessible via its dedicated software. This allows for advanced audio routing and mixing, featuring four 8-channel input mixers, 6 DAW channels, and 4 LoopBack channels. This functionality provides flexibility for diverse recording and streaming scenarios.
4. 유지관리
To ensure the longevity and optimal performance of your TOPPING E2X2, follow these maintenance guidelines:
- 청소: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners, aerosols, or solvents, as these can damage the finish or internal components.
- 저장: Store the E2X2 in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- 손질: 물리적 손상을 방지하기 위해 기기를 조심스럽게 다루십시오. 떨어뜨리거나 강한 충격을 주지 마십시오.
- 통풍: 과열을 방지하기 위해 장치 주변의 환기를 잘 하세요. 환기구를 막지 마세요.
5. 문제 해결
If you encounter issues with your TOPPING E2X2, refer to the following common troubleshooting steps:
- 전원 없음: Ensure the USB-C cable is securely connected to both the E2X2 and your computer/power source. Try a different USB port or cable.
- 소리 없음(입력):
- Check if the microphone/instrument is properly connected to the correct input.
- Verify that the GAIN knob for the respective channel is turned up.
- 콘덴서 마이크를 사용하는 경우 48V 팬텀 전원이 활성화되어 있는지 확인하십시오.
- Check your computer's sound settings to ensure the E2X2 is selected as the input device.
- 소리 없음(출력):
- Ensure headphones or speakers are correctly connected to the output jacks.
- Adjust the MONITOR knob to increase output volume.
- Check your computer's sound settings to ensure the E2X2 is selected as the output device.
- If using the INPUT/PLAYBACK button, ensure it is set to PLAYBACK for DAW audio.
- 과도한 소음/험:
- 모든 케이블이 적절하게 차폐되어 있고 단단히 연결되어 있는지 확인하십시오.
- Check for ground loops. Try connecting the computer and E2X2 to the same power outlet.
- Reduce input gain if the signal is too hot (clipping).
- Software Not Recognizing E2X2:
- Restart your computer and the E2X2.
- Reinstall the latest drivers and control software from the TOPPING web대지.
- 운영 체제가 최신 상태인지 확인하세요.
If problems persist, contact TOPPING customer support for further assistance.
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 이2X2 |
| 품목 무게 | 1.17파운드(약 0.53kg) |
| 제품 치수 | 3.94 x 3.94 x 0.98인치(약 10 x 10 x 2.5cm) |
| 연결 기술 | USB 타입-C |
| 채널 수 | 2(입력) |
| 마이크 사전amp | Ultra-Linear, EIN as low as -130.5dBu |
| 팬텀 파워 | 48V (전환 가능) |
| 입력 DNR(ADC) | 118데시벨 |
| 출력 DNR(DAC) | 115데시벨 |
| ADC THD+N | <0.0003% |
| DAC THD+N | <0.001% |
| 헤드폰 Amp 산출 | 580mW x 2 @ 32옴 |
| 헤드폰 Amp 소음 바닥 | 0.9uVrms |
| 지원 Sample Rates/Bit Depth | 44.1kHz/24bit to 192kHz/24bit |
| 운영 체제 호환성 | 윈도우, 맥, iOS, 안드로이드 |
| 지원 소프트웨어 | Avid Pro Tools, Ableton Live, Steinberg Cubase, Studio One, Logic Pro, Nuendo, Reaper, Audacity, Adobe Audition 등 |
7. 보증 정보
The TOPPING E2X2 USB Audio Interface comes with a standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or visit the official TOPPING web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
8. 지원
For technical support, driver updates, or further inquiries about your TOPPING E2X2, please visit the official TOPPING web해당 웹사이트를 방문하거나 고객 서비스 부서에 문의하십시오. 추가 자료 및 FAQ는 웹사이트에서 찾아보실 수 있습니다. TOPPING Store on Amazon.
