소개
This manual provides essential information for the safe and efficient operation of your MEFERI ME10 Wearable Computer. Please read these instructions thoroughly before using the device to ensure proper setup, usage, and maintenance.
Figure 1: MEFERI ME10 Wearable Computer mounted on a wrist strap, displaying its user interface.
설정
1. 디바이스 오버view
Familiarize yourself with the physical components of the ME10 device.
Figure 2: Detailed diagram illustrating the location and function of buttons, ports, and other features on the MEFERI ME10 Wearable Computer.
- 터치 스크린: 상호작용을 위한 메인 디스플레이.
- 전원 버튼: 측면에 위치하며 전원 켜기/끄기 및 화면 잠금에 사용됩니다.
- 기능 버튼(F1-F6): Programmable buttons for quick access to features.
- 메뉴 버튼: Accesses application menus.
- 뒤로가기 버튼: Navigates back in applications.
- 홈 버튼: 홈 화면으로 돌아갑니다.
- 마이크로폰: 오디오 입력용.
- 스피커: 오디오 출력용.
- POGO PIN: For charging and data transfer with compatible docks.
- C형 커넥터: Standard USB-C port for charging and data.
- 이어폰 포트 : 오디오 출력용 3.5mm 잭.
- 배터리: Removable battery compartment.
- 배터리 잠금: 배터리를 고정합니다.
- SD Card Cover Lock: Secures the SD card slot.
- NFC : Near Field Communication module.
- 카메라: 후면 카메라.
- 플래시: Camera flash.
- Wrist Mount Ring: 손목 스트랩 부착 지점.
2. 배터리 설치 및 충전
The ME10 uses a 3400mAh Lithium Ion battery. Ensure the battery is fully charged before first use.
- 장치 뒷면에서 배터리 구획을 찾으세요.
- Unlock the battery lock and insert the 3400mAh battery, ensuring correct orientation.
- Secure the battery by engaging the battery lock.
- Connect the device to a power source using the provided Type-C cable or a compatible POGO PIN charging dock.
- 충전 표시등이 켜집니다. 표시등이 완충을 나타낼 때까지 기기를 충전하십시오.
Figure 3: The MEFERI ME10 demonstrating its hot-swap battery feature, showing a 3400mAh battery being inserted or removed.
3. 전원 켜기 / 끄기
- 전원을 켜려면: 누르고 계세요 전원 버튼 until the MEFERI logo appears.
- 전원을 끄려면: 길게 누르세요. 전원 버튼, then select "Power off" from the options on the screen.
- To lock/unlock screen: Briefly press the 전원 버튼.
4. Network Connectivity (Wi-Fi 6)
The ME10 supports Wi-Fi 6 for fast and reliable wireless data connectivity.
- 로 이동 설정 > 네트워크 및 인터넷 > 와이파이.
- Toggle Wi-Fi to the On 위치.
- 목록에서 원하는 Wi-Fi 네트워크를 선택하세요.
- 메시지가 표시되면 네트워크 비밀번호를 입력하고 탭하세요. 연결하다.
Figure 4: The MEFERI ME10 device actively connected to a Wi-Fi 6 network, indicated by the Wi-Fi icon.
5. 블루투스 및 NFC 페어링
The ME10 supports Bluetooth 5.2 and NFC for pairing with accessories like the MS300R ring scanner.
Figure 5: The MEFERI ME10 Wearable Computer shown in conjunction with an MS300R ring scanner, illustrating a typical pairing scenario.
Pairing Modes for MS300R Scanner:
- HID Mode (Bluetooth & NFC): Connects the scanner as a human interface device, allowing direct text input into any cursor-positioned input box.
- BLE Mode (Bluetooth Low Energy via MS300R APP): Offers fast connection, low power consumption, and high reliability for data transmission. Pairing is typically done by scanning a QR code within the MS300R application.
- SPP Mode (Serial Port Profile via MS300R APP): Provides fast transmission speed and short response time, also typically paired by scanning a QR code within the MS300R application.
Figure 6: The MEFERI ME10 screen showing the HID pairing mode option, indicating connection via Bluetooth and NFC.
Figure 7: The MEFERI ME10 screen showing the BLE pairing mode, typically initiated by scanning a QR code with the MS300R application.
Figure 8: The MEFERI ME10 screen showing the SPP pairing mode, also typically initiated by scanning a QR code with the MS300R application.
작동 지침
1. Android 13 Navigation
The ME10 runs on Android 13, providing a familiar and intuitive user experience. Navigate using the touch screen and physical buttons:
- 터치 스크린: 탭하여 선택하고, 스와이프하여 스크롤하고, 핀치하여 확대/축소합니다.
- 홈 버튼: Returns to the main home screen from any application.
- 뒤로가기 버튼: Navigates to the previous screen or closes the current application.
- 메뉴 버튼: Accesses context-sensitive menus within applications.
- 기능 버튼(F1-F6): These can be configured for specific tasks or application shortcuts. Refer to your application's settings for customization options.
2. 카메라 사용
The ME10 is equipped with a 13MP rear camera that supports PDAF (Phase Detection AutoFocus) and 1080p video shooting.
- 홈 화면이나 앱 서랍에서 카메라 앱을 엽니다.
- Frame your subject using the 4-inch IPS display.
- Tap the screen to focus, or allow PDAF to automatically focus.
- Press the capture button on the screen to take a photo or start/stop video recording.
Figure 9: A user operating the MEFERI ME10, with the screen displaying the camera application interface and a 13MP rear camera module visible.
3. Data Collection with MS300R Scanner
Once the MS300R ring scanner is paired (refer to Setup section), it can be used for efficient barcode data collection.
- Ensure the MS300R scanner is powered on and successfully paired with the ME10.
- Open the relevant data collection application on the ME10.
- Point the MS300R scanner at the barcode you wish to scan and activate the scan trigger.
- The scanned data will appear in the designated field within your application.
유지
1. 장치 청소
The ME10 has an IP65 sealing rating, indicating resistance to dust and water jets. However, proper cleaning is still important.
- 청소하기 전에 장치의 전원을 끄십시오.
- 부드러운 d를 사용하세요amp cloth with mild soap or a screen cleaner to wipe the display and exterior.
- 연마성 세척제, 용제 또는 강한 화학 물질의 사용을 피하세요.
- IP65 등급을 유지하려면 모든 포트 덮개가 단단히 닫혀 있는지 확인하십시오.
- 장치를 물에 담그지 마십시오.
Figure 10: The MEFERI ME10 showcasing its industrial-grade durability with IP65 sealing and a 1.5-meter drop resistance rating.
2. 배터리 관리
배터리 수명과 성능을 극대화하려면:
- 장치를 극한의 온도에 노출시키지 마십시오.
- 배터리를 정기적으로 충전하고, 완전히 방전되는 것을 자주 피하십시오.
- The ME10 features a 50mAh hot-swap battery, allowing the main 3400mAh battery to be replaced without powering down the device, minimizing downtime.
- Use only MEFERI-approved batteries and charging accessories.
문제 해결
This section addresses common issues you might encounter with your MEFERI ME10. For more complex problems, contact customer support.
일반적인 문제 및 해결책:
- 장치가 켜지지 않음:
- 배터리가 올바르게 설치되고 충전되었는지 확인하세요.
- Connect the device to a charger and attempt to power on.
- Wi-Fi 연결 문제:
- Verify Wi-Fi is enabled in settings.
- Check if the Wi-Fi network is operational and within range.
- 네트워크를 잊고 다시 연결하세요.
- 장치를 다시 시작합니다.
- 블루투스 페어링 문제:
- 두 장치 모두에서 Bluetooth가 활성화되어 있는지 확인하십시오.
- Place devices close to each other.
- Check if the accessory is in pairing mode.
- Clear previous pairings and attempt to pair again.
- 애플리케이션이 정지되거나 충돌함:
- 응용 프로그램을 닫고 다시 시작합니다.
- Clear the application's cache (Settings > Apps > [App Name] > Storage & cache > Clear cache).
- 장치를 다시 시작합니다.
- 느린 성능:
- 불필요한 백그라운드 애플리케이션을 닫습니다.
- 충분한 저장 공간을 확보하세요.
- 장치를 다시 시작합니다.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | ME10 |
| 운영 체제 | Android 13 (GMS, Verified Boot) |
| 프로세서 | Qualcomm Octa-core (QCM4490, 2.4GHz) |
| 메모리 | 4GB RAM + 64GB 플래시 메모리 |
| 표시하다 | 4.0-inch IPS, 800 x 480 WVGA Resolution, Corning Gorilla Glass III |
| 무선 연결 | Wi-Fi 6, 블루투스 5.2, NFC |
| 카메라 | Rear 13MP with PDAF, 1080p video shooting |
| 내구성 | IP65 Sealing, 1.5m (4.9 ft) Drop Resistance |
| 배터리 | 3400mAh Lithium Ion (Replaceable), 50mAh Hot-Swap Battery, 12+ hours Work Time |
| 포트 | Type-C Connector, POGO PIN, Earphone Port |
| 치수(패키지) | 8.07 x 3.94 x 3.54 인치 |
| 품목 무게 | 8.1 온스 |
| 제조업체 | 메페리 |
| 인증 | AER, GMS, CE, ROHS, FCC, MSDS, UN38.3, ICE, ISO9001 |
보증 및 지원
1. 제품 보증
The MEFERI ME10 Wearable Computer comes with a 12개월 수리 기간 after shipment. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
2. Technical Support and SDK
MEFERI provides technical support for its devices. If you require assistance or have questions regarding the device's functionality, please contact MEFERI customer service.
For developers, a Software Development Kit (SDK) is available for all MEFERI devices. Please contact MEFERI directly to obtain the SDK and related documentation for custom application development.
