GOOLOO GP3000/A3 3000A Jump Starter with 150PSI Air Compressor Instruction Manual

1. 제품 오버view

The GOOLOO GP3000/A3 is a versatile 5-in-1 device combining a powerful 3000A peak current jump starter, a 150PSI air compressor, a portable power bank, an LED flashlight, and an SOS emergency light. It is designed to provide reliable assistance for various vehicles and devices.

Figure 1: GOOLOO GP3000/A3 Jump Starter and Air Compressor unit with accessories.

2. 설정 및 충전

2.1 기기 충전

Before first use, fully charge the GP3000/A3 unit. Use the provided USB-C cable and a compatible charger (not included) to charge the device. The battery level indicator on the screen will show charging progress.

2.2 점퍼 케이블 연결하기

1. Open the protective cap on the jump starter port.
2. Insert the blue end of the smart jumper cable into the jump starter port on the GP3000/A3 unit. Ensure a secure connection.
3. The smart jumper cable features built-in safety protections against over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, 과부하, 스파크 방지 및 역충전.

2.3 Connecting Air Compressor Hose

1. Locate the air compressor hose port on the unit.
2. Screw the air compressor hose securely into the port.
3. Attach the appropriate nozzle from the accessory kit for the item you wish to inflate.

3. 사용 설명서

3.1 차량 점프 스타트

1. Ensure the GP3000/A3 unit is sufficiently charged.
2. 빨간색 cl을 연결하세요amp 차량 배터리의 양극(+) 단자에 연결합니다.
3. 검은색 cl을 연결하세요amp 차량 배터리의 음극(-) 단자에 연결합니다.
4. Check the smart jumper cable indicator light. A solid green light indicates a correct connection and the unit is ready. If the light is red or flashing, check connections for reverse polarity or other issues.
5. If the vehicle battery is completely dead or voltage is too low to detect, press the "BOOST" button on the smart jumper cable. The indicator light will turn solid green, providing maximum power for 30 seconds.
6. Start the vehicle. Once the vehicle starts, immediately remove the clamp배터리 단자로부터.

Figure 2: Jump starter connected to a vehicle battery for emergency starting.

3.2 타이어 인플레이션

1. Connect the air compressor hose to the tire valve.
2. Turn on the GP3000/A3 unit. The screen will display the current tire pressure.
3. Use the mode button to select the appropriate inflation mode (SUV, car, bike, ball, or customizable).
4. Use the +/- buttons to set the desired pressure (PSI, BAR, or KPA).
5. Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.

Figure 3: The unit inflating a vehicle tire, displaying current and target pressure.

3.3 보조 배터리 기능

The GP3000/A3 features USB-A and USB-C output ports to charge smartphones, tablets, and other USB-powered devices. Simply connect your device using a compatible USB cable.

Figure 4: The jump starter unit charging various electronic devices.

3.4 LED Flashlight and SOS Light

Press and hold the power button for 3 seconds to turn on the LED flashlight. Press the power button again to cycle through different modes: solid light, strobe, and SOS signal. Press and hold again to turn off.

Figure 5: Demonstrating the normal, strobe, and SOS modes of the integrated LED flashlight.

4. 안전 정보

The GP3000/A3 is equipped with 10 smart safety protections, including over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, and reverse-charge protection. Always follow these guidelines for safe operation:

• 본 제품을 물에 담그지 마십시오.
• 장치를 분해하지 마십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 제공된 스마트 점퍼 케이블만 사용하십시오.
• Do not jump start a vehicle with a severely damaged or frozen battery.

Figure 6: Smart jumper cable highlighting the 10 built-in safety protections.

5. 유지 관리 및 보관

The GP3000/A3 is designed for durability with over 1000+ charge cycles. To ensure longevity and optimal performance:

• 배터리 수명 유지를 위해 사용하지 않을 때에도 3~6개월에 한 번씩 기기를 충전하십시오.
• Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The operating temperature range is -4°F to 140°F (-20°C to 60°C).
• 마른 부드러운 천으로 제품을 닦으십시오. 독한 화학 약품이나 연마제를 사용하지 마십시오.

6. 문제 해결

• 장치가 켜지지 않음: 기기가 충전되어 있는지 확인하십시오. 전원 버튼을 몇 초 동안 길게 누르십시오.
• Jumper cable indicator light is red/flashing: Check for reverse polarity (red clamp on negative, black on positive) and correct the connection. If the battery is extremely low, use the BOOST function.
• 공기압축기가 작동하지 않습니다: Ensure the hose is securely attached and the desired pressure is set. Check for leaks in the hose or tire valve.
• Unit overheating: The device has built-in overheat protection. If it becomes too hot, it will temporarily shut down. Allow it to cool down before resuming use.

7. 사양

• Peak Cranking Amp나이: 3000 Amps
• 배터리 용량tage: 12 볼트
• 배터리 셀 구성: 리튬폴리머
• Max Engine Compatibility: 최대 9.0리터 가솔린, 6.5리터 디젤
• Max Tire Inflator Pressure: 150파운드
• 공기 흐름: 35L/분
• 작동 온도: -4°F ~ 140°F(-20°C ~ 60°C)
• USB 출력: USB-A (5V/3A), USB-C (5V/3A, 9V/2A, 12V/1.5A)
• 배터리 용량: 44.4Wh

8. 공식 제품 영상

Watch this official video from GOOLOO for a demonstration on how to jump start a car using a similar model.

Video 1: How to Jump Start a Car Using GOOLOO GT6000 (similar to GP3000/A3).

9. 보증 및 지원

For warranty information, technical support, or further inquiries, please refer to the official GOOLOO website or contact GOOLOO customer service directly. You can also visit the GOOLOO 스토어 아마존에서 만나보세요.