1. 제품 오버view
The CYCLAMI Bike Speed/Cadence Sensor is a versatile device designed to track your cycling performance. It supports both speed and cadence measurements, connecting wirelessly via ANT+ and Bluetooth to a wide range of cycling computers and fitness applications. Its compact and lightweight design, combined with IPX6 waterproofing, makes it suitable for various riding conditions.
Image 1.1: The CYCLAMI Bike Speed/Cadence Sensor, a compact device for tracking cycling data.
주요 특징:
- 듀얼 모드: Functions as either a speed sensor or a cadence sensor. Note: Two sensors are required for simultaneous speed and cadence data.
- 무선 연결 : Supports ANT+ and Bluetooth protocols for broad compatibility.
- 폭넓은 호환성: Works with popular apps like Zwift, Rouvy, Xoss, Blackbird, Samsung Health, Apple Watch, TrainingPeaks, Navihood, Keep, Nike+, Gudong, and more.
- 간편한 설치: Simple attachment to the wheel hub for speed or crank arm for cadence using rubber bands.
- 내구성 있는 디자인: IPX6 waterproof rating and lightweight (8.1g).
- 긴 배터리 수명: 최대 270시간 연속 사용이 가능합니다.
2. 설정 및 설치
2.1 배터리 활성화
Before first use, remove the insulating sheet located underneath the battery. This activates the sensor for operation.
Image 2.1: Locate and remove the insulating sheet from the battery compartment before use.
2.2 Switching Between Speed and Cadence Modes
The sensor features a one-touch switch to toggle between speed and cadence modes. Press the small button on the sensor to switch modes. The LED indicator will change color to confirm the active mode:
- 녹색불: 속도 모드
- 백색광: 케이던스 모드
After switching modes, you may need to reconnect the sensor to your receiving device or application.
Image 2.2: The sensor's LED indicator shows green for speed mode and white for cadence mode.
2.3 속도 모드 설치
- Switch the sensor to Speed Mode (Green LED).
- Snap the curved rubber patch onto the back of the sensor.
- Tie the sensor securely to the front or rear wheel hub using the provided rubber band.
- Open your mobile riding app or cycling computer to search for the device.
Image 2.3: Step-by-step guide for installing the sensor in speed mode on the wheel hub.
2.4 케이던스 모드 설치
- Switch the sensor to Cadence Mode (White LED).
- Snap the curved rubber patch onto the back of the sensor.
- Tie the sensor securely to the pedal crank arm using the provided rubber band.
- Open your mobile riding app or cycling computer to search for the device.
Image 2.4: Step-by-step guide for installing the sensor in cadence mode on the crank arm.
3. 사용 설명서
3.1 기기 및 애플리케이션과의 페어링
The CYCLAMI sensor supports both Bluetooth and ANT+ protocols, allowing it to connect with a wide range of cycling computers, smartwatches, and fitness applications. Ensure your device's Bluetooth or ANT+ is enabled and follow its instructions to search for and pair with the sensor.
Image 3.1: The sensor is compatible with numerous applications and devices via BLE 5.0 and ANT+ protocols.
3.2 데이터 전송
Once paired, the sensor will automatically transmit real-time speed or cadence data to your connected device. Ensure the sensor is within range of your device for continuous data reception.
4. 유지관리
4.1 방수
The sensor has an IPX6 waterproof rating, meaning it is protected against powerful water jets. It can withstand rain and splashes during cycling. However, it is not designed for submersion in water for extended periods.
Image 4.1: The sensor's IPX6 rating ensures protection against water splashes during rides.
4.2 배터리 교체
The sensor is powered by a replaceable battery, offering up to 270 hours of battery life. When the battery is low, the sensor's performance may degrade or it may stop transmitting data. Refer to the sensor's casing for battery type and replacement instructions. Ensure proper polarity when inserting a new battery.
4.3 청소
Clean the sensor periodically with a soft, damp 천을 사용하세요. 연마성 세제나 용제를 사용하면 천이 손상될 수 있으니 사용하지 마세요.asing 또는 전자 부품.
5. 문제 해결
5.1 Sensor Not Activating/No LED Light
- Check Battery Insulation: Ensure the plastic insulating sheet has been removed from under the battery.
- 배터리 수준: 배터리가 방전된 경우 교체하십시오.
- 배터리 방향: 배터리가 올바른 극성으로 삽입되었는지 확인하십시오.
5.2 Difficulty Pairing with Device
- 센서 모드: Confirm the sensor is in the correct mode (speed or cadence) for the data you wish to receive.
- Device Bluetooth/ANT+: 수신 장치에서 블루투스 또는 ANT+가 활성화되어 있는지 확인하십시오.
- 근접성: Keep the sensor close to your receiving device during the pairing process.
- 간섭: 간섭을 일으킬 수 있는 다른 전자 장치에서 멀리 떨어지세요.
- 재부팅: 센서(배터리를 제거했다가 다시 삽입하여)와 수신 장치를 모두 재시작해 보세요.
5.3 부정확한 판독값
- 설치: Verify the sensor is securely mounted and correctly positioned according to the installation instructions for the chosen mode (speed on hub, cadence on crank arm).
- Tire Size Calibration (Speed Mode): Ensure your cycling computer or app has the correct wheel circumference entered for accurate speed readings.
- 장애물: Check for any physical obstructions between the sensor and the magnet (if applicable, though this sensor is magnet-less) or the receiving device.
6. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 사이클라미 |
| 모델명 | CYCLAMI C1 |
| 제품 치수 | 1.3인치 길이 x 0.39인치 너비 x 1.1인치 높이 |
| 품목 무게 | 8.1그램 |
| 센서 유형 | 속도 센서, 케이던스 센서 |
| 연결 기술 | ANT+, 블루투스 |
| 국제 보호 등급 | IPX6 |
| 배터리 수명 | 최대 270시간 |
| 휴먼 인터페이스 입력 | 버튼 |
| 포함된 구성 요소 | Bike sensor |
7. 보증 및 지원
7.1 보증 정보
이 제품에는 다음이 포함되어 있습니다. 1 년 warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
7.2 고객 지원
For technical assistance, troubleshooting, or warranty inquiries, please refer to the seller's contact information on the platform where the product was purchased. You may also visit the official CYCLAMI brand store for additional resources and support.
CYCLAMI Store: https://www.amazon.com/stores/CYCLAMI/page/A2CA0EF8-4594-4102-A438-7FBC9833393A
