MORNWELL 데드볼트 잠금 장치 "Cerrojo cilindro 01" 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your MORNWELL Deadbolt Lock, model "Cerrojo cilindro 01". Please read this manual thoroughly before installation and use to ensure proper function and safety.

The MORNWELL Deadbolt Lock is designed for enhanced security, featuring a solid brass pin cylinder and stainless steel knob and escutcheon. It is suitable for doors with a thickness range of 35 mm to 50 mm (1 3/8" to 2"). The reversible latch bolt is adjustable for backsets of 60mm to 70mm (2 3/8" to 2 3/4").

Figure 1: MORNWELL Deadbolt Lock (Exterior View)

This image displays the MORNWELL Deadbolt Lock, showing the exterior key cylinder and the deadbolt mechanism. The lock features a polished silver finish, indicating its stainless steel construction.

2. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Deadbolt assembly (exterior cylinder with keyway, interior thumb-turn knob)
• Adjustable latch bolt mechanism
• 스트라이크 플레이트
• 보강 판
• Mounting screws (various sizes)
• Three (3) keys

그림 2: 포함된 구성 요소

This image illustrates all the components included in the MORNWELL Deadbolt Lock package, such as the deadbolt unit, latch, strike plate, reinforcement plate, screws, and three keys.

3. 제품 사양

그림 3: 제품 치수

This image provides a detailed diagram of the MORNWELL Deadbolt Lock with key dimensions in millimeters, including the diameter of the lock body, the length of the latch, and the adjustable backset measurements.

4. 설치 지침

Installation of the MORNWELL Deadbolt Lock is designed to be straightforward. Follow these steps carefully:

1. 문 준비: Ensure your door has the necessary holes for a deadbolt. The lock fits standard door thicknesses from 35mm to 50mm.
2. Adjust the Latch Bolt: The latch bolt is reversible and adjustable for backsets of 60mm or 70mm. Adjust it to match your door's backset by twisting the mechanism as needed.
3. 래치 볼트를 설치하세요: 도어의 모서리 구멍에 래치 볼트를 삽입할 때, 경사면이 도어 프레임을 향하도록 하십시오. 제공된 나사를 사용하여 고정하십시오.
4. 외부 실린더를 설치하십시오: Place the exterior cylinder (with the keyway) through the cross bore hole on the outside of the door.
5. Install the Interior Thumb-Turn: Align the interior thumb-turn mechanism with the exterior cylinder and the latch bolt. Ensure the spindle from the exterior cylinder engages with the latch mechanism.
6. 잠금장치를 고정하세요: Fasten the interior and exterior components together using the long mounting screws provided. Tighten securely but do not overtighten.
7. 스트라이크 플레이트 설치: 걸쇠판을 문틀에 설치하고 걸쇠 볼트와 정렬한 후 나사로 고정하십시오.
8. 테스트 작업: Close the door and test the deadbolt with the key from the outside and the thumb-turn from the inside to ensure smooth operation.

Figure 4: Adjustable Door Hand

This image demonstrates how the deadbolt can be adjusted for both left-handed and right-handed door installations, ensuring versatility.

Figure 5: Exterior Installation Example

This image shows the MORNWELL Deadbolt Lock installed on the exterior side of a door, demonstrating its appearance when fitted.

Figure 6: Interior Installation Example

This image displays the MORNWELL Deadbolt Lock installed on the interior side of a door, paired with a lever handle, highlighting the thumb-turn mechanism.

5. 사용 설명서

The MORNWELL Deadbolt Lock provides secure locking with simple operation:

• 외부에서 잠그기: Insert one of the provided keys into the keyway on the exterior side of the deadbolt. Turn the key clockwise to extend the deadbolt into the strike plate, then remove the key.
• 외부에서 잠금 해제하기: Insert the key into the keyway and turn counter-clockwise to retract the deadbolt.
• Locking from the Interior: Rotate the thumb-turn knob on the interior side of the deadbolt clockwise to extend the deadbolt.
• Unlocking from the Interior: Rotate the thumb-turn knob counter-clockwise to retract the deadbolt.

Figure 7: Key and Thumb-Turn Operation

This image shows both the exterior key cylinder and the interior thumb-turn mechanism, along with the three keys provided for operation.

Figure 8: Interior Keyed Operation

Note: The MORNWELL Deadbolt Lock "Cerrojo cilindro 01" is designed with a key on the exterior and a thumb-turn on the interior for ease of exit. This image may depict a different variant or a generic representation.

6. 관리 및 유지 보수

To ensure the longevity and smooth operation of your MORNWELL Deadbolt Lock, follow these maintenance guidelines:

• 청소: 자물쇠의 외부 표면을 부드러운 천으로 닦으세요.amp 천으로 닦으십시오. 연마성 세척제나 용제는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
• 매끄럽게 하기: Periodically apply a small amount of graphite-based lubricant or a silicone-based spray lubricant into the keyway and the latch mechanism. Do not use oil-based lubricants, as they can attract dirt and dust.
• 점검: Regularly check all screws and components for tightness. Ensure the deadbolt extends and retracts smoothly without obstruction.
• 부식 저항성: The lock is made of stainless steel and copper, offering anti-corrosive properties. However, prolonged exposure to harsh weather conditions may still affect its appearance over time.

그림 9: 주요 기능

This image highlights the robust internal cylinder design and the corrosion-resistant properties of the MORNWELL Deadbolt Lock, emphasizing its durability.

7. 문제 해결

If you encounter issues with your MORNWELL Deadbolt Lock, refer to the following common problems and solutions:

• Deadbolt does not extend or retract smoothly:
  • 문틀이나 잠금장치에 장애물이 있는지 확인하십시오.
  • 장착 나사가 너무 세게 조여지지 않도록 하십시오. 과도하게 조이면 걸림 현상이 발생할 수 있습니다.
  • 걸쇠 메커니즘과 키홈에 윤활유를 바르십시오.
  • Verify that the latch bolt is correctly aligned with the strike plate.
• Key is difficult to turn or gets stuck:
  • 열쇠가 열쇠 구멍에 완전히 삽입되었는지 확인하십시오.
  • 키홈에 흑연 윤활제를 바르십시오.
  • 열쇠가 구부러졌거나 손상되었는지 확인하십시오. 여분의 열쇠가 있으면 사용하십시오.
• Thumb-turn is stiff:
  • Check for any loose components or debris around the thumb-turn mechanism.
  • Ensure the interior and exterior parts are properly aligned and not binding.
• Lock feels loose on the door:
  • 고정 나사를 조이세요. 너무 세게 조이지 마세요.
  • Ensure the lock is correctly seated in the door's bore holes.

8. 보증 및 지원

Your MORNWELL Deadbolt Lock is designed for durability and performance. For specific warranty details, please refer to the product packaging or contact the seller directly. Amazon's return policy allows returns for this product up to January 31, 2026.

For further assistance or technical support, please contact MORNWELL customer service or the retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.