1. 서론
This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your Loom Solar Fusion 3kW, 1Phase On-Grid Solar Inverter. Please read this manual thoroughly before installation and operation, and keep it for future reference.
Figure 1: Loom Solar Fusion 3kW On-Grid Solar Inverter, front view.
2. 안전 정보
Safety is paramount when dealing with electrical equipment. Adhere to all local and national electrical codes. Only qualified personnel should perform installation and maintenance.
- Intelligent AFCI (Arc-fault Circuit Interrupter) Protection: The inverter is equipped with AFCI protection that cuts off DC arcs within 0.5 seconds to prevent potential fire hazards.
- AC/DC 서지 보호: Integrated lightning protection safeguards the inverter and connected systems from electrical surges.
- IP65 보호 : The inverter's robust design ensures it is dustproof, waterproof, and anti-salt fog, providing durability in various environmental conditions.
- Always disconnect all power sources (DC and AC) before performing any service or maintenance.
- 인버터를 직접 열거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
뛰어난 안전성
서지 보호
3. 제품 특징
The Loom Solar Fusion 3kW On-Grid Solar Inverter is designed with advanced technology to provide reliable and efficient solar power conversion for residential applications.
- 고효율성: Achieves an industry-leading conversion efficiency of 98% through advanced power electronics technologies.
- 원격 모니터링: Supports remote monitoring via GPRS/Wifi Kit, WLAN, and Ethernet, allowing you to track performance from anywhere.
- Wide MPPT Voltag전자 범위: Features an extra-wide Maximum Power Point Tracking (MPPT) voltage range for optimized energy harvesting.
- 견고한 디자인: Built to withstand extreme weather conditions including high temperatures, snow, sandstorms, and rain.
- 스마트한 디자인: Easy to install with an intuitive LED display for local monitoring.
Figure 2: Key features of the Loom Solar On-Grid Solar Inverter.
4. 설정 및 설치
Installation of the Loom Solar Fusion inverter should only be performed by certified and qualified solar professionals. Improper installation can lead to equipment damage, personal injury, or voiding of warranty.
- 사이트 선택: Choose a well-ventilated area, protected from direct sunlight and excessive moisture. Ensure adequate clearance around the inverter for heat dissipation.
- 설치: Securely mount the inverter to a sturdy wall or frame using appropriate hardware.
- 전기 연결: Connect the DC input from the solar panels and the AC output to the grid according to the wiring diagram provided in the full installation guide (not included in this manual). Ensure all connections are tight and correctly polarized.
- 접지: Properly ground the inverter as per local electrical codes.
5. 사용 설명서
Once installed and connected, the Loom Solar Fusion inverter operates largely automatically. It will convert DC power from your solar panels into AC power for your home and the grid.
- 초기 시작: After all connections are verified, switch on the DC isolator and then the AC breaker. The inverter will perform self-tests and begin operation.
- LED 디스플레이: The front panel features an LED display that provides real-time operational status, power output, and error codes. Refer to the full manual for a detailed explanation of display messages.
- 원격 모니터링: For detailed performance tracking, connect the inverter to your network using the GPRS/Wifi Kit, WLAN, or Ethernet. Download the Loom Solar mobile application to monitor your system remotely.
Figure 3: Remote monitoring via the Loom Solar mobile application.
6. 유지관리
정기적인 유지보수는 태양광 인버터의 수명 연장과 최적의 성능을 보장합니다.
- 청소: 부드럽고 마른 천으로 인버터 외부를 정기적으로 청소하십시오. 통풍구에 먼지나 이물질이 없는지 확인하십시오. 액체 세제는 사용하지 마십시오.
- 시각적 검사: Regularly check for any visible damage to the casing, cables, or connections.
- 성과 모니터링: Utilize the remote monitoring system to track the inverter's performance and identify any anomalies early.
- 전문가 검진: It is recommended to have a qualified technician perform a comprehensive inspection and maintenance check annually.
7. 문제 해결
This section provides general guidance for common issues. For complex problems, contact Loom Solar customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 인버터가 전력을 생산하지 않습니다 | No sunlight, DC isolator off, AC breaker off, grid outage, error code displayed. | Check sunlight conditions. Ensure DC isolator and AC breaker are ON. Verify grid status. Check inverter display for error codes and consult the full manual. |
| 낮은 전력 출력 | Partial shading on panels, dirty panels, suboptimal weather, system fault. | Clear any shading. Clean solar panels. Monitor weather conditions. If issue persists, contact support. |
| 디스플레이의 오류 메시지 | Internal fault, grid issue, connection problem. | Note down the error code. Refer to the detailed error code section in the comprehensive manual or contact Loom Solar support. |
8. 사양
Detailed technical specifications for the Loom Solar Fusion 3kW On-Grid Solar Inverter.
Figure 4: Detailed technical specifications for Fusion 31 inverter.
| 기인하다 | 값 |
|---|---|
| 제조업체 | LOOM 태양광 PVT. 주식회사 |
| 품목 모델 번호 | 퓨전 |
| 제품 크기(L x W x H) | 28 x 18.5 x 31cm |
| 품목 무게 | 6kg |
| 순량 | 1 카운트 |
| 일반 이름 | 인버터 |
| 상표 | Loom Solar |
| 제품의 권장 용도 | 집 |
| 전원 | 태양열 전원 |
| 왓tage | 3000 와트 |
| 모델명 | 퓨전 31 |
| 최대 입력 전력 | 3000W + 10% |
| Max. DC I/P (Vdc) | 550V |
| Max. MPPT Voltag및 범위 | 70-550V |
| 최대 입력 전류 | 20A |
| 정격 AC 전원 | 3000와트 |
| 정격 그리드 주파수 | 50Hz (±5%) |
| 정격 그리드 볼륨tage | 230V |
| 정격 출력 전류 | 14.3 Amp |
| 역률 | 0.8 |
| 침투 방지 | IP65 |
| 작동 주변 온도 | -25°C ~ +65°C |
9. 보증
The Loom Solar Fusion 3kW On-Grid Solar Inverter comes with a 5년 보증안심하고 안정적인 성능을 누릴 수 있도록 보장합니다.
To log a complaint or register your warranty, please visit the official Loom Solar warranty registration portal:
10. 지원
For any technical assistance, queries, or support regarding your Loom Solar Fusion inverter, please contact us:
- 고객 지원 연락처: 8447921124
- 이메일: sales@loomsolar.com
- Web대지: www.loomsolar.com
- 제조업체 주소: LOOM SOLAR PVT. LTD., Plot no. 14/8, Mathura Road, Sector - 27B, Faridabad - 121003
