소개
This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver. Please read it thoroughly before setup and use to ensure optimal performance and safety.
Figure 1: SCULPFUN S30 Laser Engraver with various engraved samples including a wallet, business cards, and a wooden insect model.
안전 정보
Operating a laser engraver involves potential hazards. Adhere strictly to the following safety guidelines:
- 눈 보호: Always wear appropriate laser safety goggles (Laser Class IV) when the laser is active. Never look directly at the laser beam.
- 통풍: 조각 및 절단 작업 중에 발생하는 연기와 연기를 없애기 위해 통풍이 잘 되는 곳에서 조각기를 작동하세요.
- 화재 위험: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation. The S30 includes an emergency power switch for quick shutdown.
- 재료 호환성: Only engrave or cut materials safe for laser processing. Avoid PVC, vinyl, and other materials that produce toxic fumes.
- 작업 표면 보호: Use the provided A4 size steel mat or a similar fire-resistant surface to protect your workbench from laser damage.
- 어린이와 애완동물: 어린이와 애완동물을 수술 구역에 접근하지 못하게 하세요.
- 전기 안전: Ensure the power supply is correctly connected and grounded. Do not operate with wet hands or in damp 정황.
제품 특징
The SCULPFUN S30 Laser Engraver incorporates advanced features for precision and efficiency:
- 자동 공기 보조 장치: Equipped with an automatically controlled air pump. This feature intelligently manages air-assist via the M8 button in LightBurn software, directing high-pressure airflow through the metal nozzle. This significantly increases cutting speed (over 5 times faster) and improves cutting performance by clearing debris and reducing charring.
- Ultra-fine Laser Modeling Technology: Features a precise 0.005mm industrial linear guide and a laser focus of 0.06x0.06mm. This results in higher energy density, stronger cutting penetration, and enhanced engraving accuracy, eliminating wave lines in engravings.
- 안전하고 안정적인 디자인: Constructed from high-strength aluminum alloy, capable of supporting up to 50kg. Includes an emergency power switch for immediate shutdown and an A4 size steel mat to protect surfaces.
- Expandable Engraving Area: The original working area is approximately 400x400mm. It can be expanded to 935x400mm with a Y-axis extension kit, or further to 935x905mm with an XY-axis extension kit (sold separately), accommodating larger projects.
- 폭넓은 호환성: The latest 32-bit motherboard supports automatic Air-Assist control. Features Bluetooth and SD card offline printing. Compatible with LightBurn (with M8 air support), LaserGRBL, Benbox, GrblController, and LiteFire. Supports Windows and MAC systems. File 지원되는 이미지 형식에는 NC, BMP, JPG, PNG, DXF 및 기타 형식이 포함됩니다.
- 레이저 출력: Class IV laser with 5000mW output power.
Figure 2: Illustration of the S30's high-density, sharp laser beam and 5W powerful laser beam shaping technology.
Figure 3: Close-up of the S30's built-in high-pressure air assist nozzle, demonstrating airflow.
Figure 4: Diagram showing the automatic controlled air assist feature and its integration with LightBurn software (M8 Air Assist Switch).
Figure 5: Comparison illustrating the benefits of automatic air assist over traditional manual air pumps for clean edges and efficient cutting.
Figure 6: Visual representation of the high precision 0.005mm industrial grade linear rail, highlighting the improved engraving accuracy without wavy lines.
설치 가이드
Follow these steps to set up your SCULPFUN S30 Laser Engraver:
- 짐 풀기: 포장에서 모든 구성품을 조심스럽게 꺼내십시오. 포장 목록과 대조하여 모든 부품이 있는지 확인하십시오.
- 집회: Assemble the frame according to the included assembly instructions. Ensure all screws are tightened securely.
- 레이저 모듈 설치: Mount the laser module onto the gantry. Connect the laser module cable to the main control board.
- 에어 펌프 연결: Connect the air pump to the designated port on the laser module and the main control board.
- 전원 및 USB 연결: Connect the power adapter to the engraver and a power outlet. Connect the engraver to your computer via the provided USB cable.
- 소프트웨어 설치: Install the recommended software (e.g., LightBurn, LaserGRBL) on your computer. Drivers may be required.
- 초기 교정: Follow the software's instructions for initial calibration, including setting the working area and focusing the laser.
그림 7: 이상view of the SCULPFUN S30 components, including the laser module, air pump, and frame parts.
작동 지침
This section outlines the basic steps for operating your laser engraver:
- 재료 준비: Place the material to be engraved or cut on the work surface, ensuring it is flat and secure. Use the steel mat underneath.
- 소프트웨어 설정: Open your chosen laser control software (e.g., LightBurn). Import or create your design.
- 매개 변수 설정 : Adjust laser power, speed, and passes based on the material and desired effect. Refer to material test guides for optimal settings.
- 레이저를 집중시키세요: Manually or automatically adjust the laser focus for optimal performance. The S30 features a fixed-focus laser, simplifying this step.
- Enable Air Assist: For cutting operations, ensure the automatic air assist is enabled in the software (M8 command in LightBurn). For engraving, it may be turned off for finer details.
- 작업 시작: Initiate the engraving or cutting process from the software. Monitor the process closely.
- 완성: Once the process is complete, wait for the laser to stop and fumes to clear before removing the material.
Video 1: Demonstration of the SCULPFUN S30 Laser Engraver in operation, showcasing its cutting and engraving capabilities on various materials. This video highlights the precision and speed of the machine.
비디오 2: 자세한 내용view of the SCULPFUN S30/S30 Pro/S30 Pro Max laser engraver, illustrating key features and performance aspects across the series.
유지
Regular maintenance ensures the longevity and performance of your engraver:
- 렌즈 청소: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser focus and power. The S30 features a replaceable lens for easy maintenance.
- 작업 공간을 청소하세요: Remove debris and dust from the honeycomb workbed and surrounding areas after each use.
- 레일에 윤활유를 바르십시오: Apply a small amount of lubricant to the linear guide rails periodically to ensure smooth movement of the laser module.
- 연결 확인: Regularly inspect all cable connections for looseness or damage.
문제 해결
일반적인 문제 및 해결 방법:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 레이저가 발사되지 않습니다 | Power cable loose, emergency stop engaged, software error, laser module fault. | Check power connections, release emergency stop button, restart software/computer, contact support if issue persists. |
| 조각/절단 품질이 좋지 않음 | 초점 불량, 출력/속도 설정 오류, 렌즈 오염, 재질 문제. | Re-focus laser, adjust power/speed settings, clean laser lens, ensure material is suitable and flat. |
| 기계가 움직이지 않음 | Loose belt, motor cable disconnected, software communication error. | Check and tighten belts, verify motor cable connections, restart software/computer, check USB connection. |
| 에어 어시스트가 작동하지 않습니다 | Air pump not connected, M8 command not enabled in software, air hose kinked. | Ensure air pump is connected and powered, enable M8 command in LightBurn, check air hose for obstructions. |
명세서
- 모델: xxl-S30 5W
- 레이저 출력 전력: 5W
- 조각 영역: 400mm x 400mm (Expandable to 935mm x 400mm or 935mm x 905mm with extension kits)
- 레이저 초점: 0.06mm x 0.06mm
- Linear Guide Accuracy: 0.005mm
- 마더보드: Latest 32-bit with Air-Assist automatic control
- 연결성: USB, Bluetooth, SD Card (offline printing)
- 지원 소프트웨어: LightBurn, LaserGRBL, Benbox, GrblController, LiteFire
- 지원되는 운영 체제: 윈도우, 맥
- 지원됨 File 형식: NC, BMP, JPG, PNG, DXF 등
- 제품 크기: 18.11 x 18.11 x 6.69 인치
- 품목 무게: 14.17파운드
- 제조업체: 스컬펀
- 원산지: 중국
- 첫 이용 가능 날짜: 9년 2024월 XNUMX일
보증 및 지원
For warranty information and technical support, please refer to the official SCULPFUN web웹사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
SCULPFUN Official Store: Visit the SCULPFUN Store on Amazon
