Gevi V2.0 Countertop Nugget Ice Maker Instruction Manual

1. 서론

Thank you for choosing the Gevi V2.0 Countertop Nugget Ice Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.

Important Note on Dimensions: The Gevi Nugget Ice Maker dimensions are 17.3" L x 9.7" W x 16.7" H. Please ensure your countertop has adequate space before ordering or placing the unit.

2. 제품 특징

• Gemi Nugget Ice: Produces chewable, crunchable nugget ice, also known as pellet or chewblet ice.
• 높은 얼음 생산: Capable of producing up to 38 pounds of fresh ice in 24 hours with a 2.8L large capacity water reservoir. First ice batch ready in 10 minutes or less.
• Upgraded System: Features an upgraded system designed to reduce scale buildup by 50%, promoting cleaner ice and extending machine lifespan.
• Dual Water Filling Options: Offers both manual water filling for quick refills and automatic water filling for continuous operation (10ft 1/4" hose included).
• Double Layer Material Insulation: Advanced 2-layer insulation retains ice for up to 12 hours, maintaining up to 85% of its original temperature.
• 조용한 작동: Equipped with a high-performance compressor and muffled exhaust fan, operating at approximately 50dB, quieter than a normal conversation.
• Smart Auto & Self-Cleaning: Includes an ice-full infrared sensor to stop production when the basket is full and a built-in descaling system for automatic internal cleaning.

3. 상자 안에 무엇이 들어있나요?

포장을 뜯으실 때 모든 물품이 있는지 확인해 주세요.

• Gevi V2.0 조리대 너겟 아이스 메이커
• 얼음 국자
• 얼음 바구니
• 10ft 1/4" Hose (for automatic water filling)
• 사용자 설명서

4. 설정

1. 짐 풀기: 제빙기를 포장에서 조심스럽게 꺼내십시오. 추후 운반 또는 보관을 위해 포장재를 보관해 두십시오.
2. 놓기: Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit. Refer to the product dimensions (17.3" L x 9.7" W x 16.7" H) to confirm fit under cabinets.
3. 초기 청소: Before first use, it is recommended to run the self-cleaning cycle. Fill the water reservoir with clean water and initiate the cleaning function as described in the 'Maintenance and Cleaning' section. Drain the water after the cycle.
4. 물 충전:
   • 수동 입력: Open the top lid and pour clean, potable water directly into the water reservoir up to the MAX fill line.
   • 자동 채우기: Connect the provided 10ft 1/4" hose to a potable water supply line and to the designated inlet on the back of the ice maker. Ensure all connections are secure to prevent leaks.
5. 전원 연결: 제빙기를 접지된 전기 콘센트에 꽂으세요.

5. 사용 설명서

1. 전원 켜기: Press the 'On/Off' button on the control panel to start the ice maker. The 'Making' indicator light will illuminate.
2. 얼음 생산: The machine will begin producing ice. The first batch of nugget ice typically takes 5-10 minutes.
3. 얼음 가득 센서: The ice maker is equipped with an infrared sensor. When the ice basket is full, the 'Ice Full' indicator light will turn on, and the machine will automatically stop producing ice. Remove ice from the basket to resume production.
4. 물 표시기 추가: If the water reservoir is low, the 'Add Water' indicator light will illuminate. Refill the reservoir manually or ensure the automatic water supply is connected and functioning.
5. 전원 끄기 : Press the 'On/Off' button to turn off the ice maker.

그림 1: 제어판view

그림 2: 상세 View of Control Panel Indicators

6. 유지관리 및 청소

Regular cleaning and maintenance are crucial for optimal performance and longevity of your ice maker.

1. 자체 청소 주기: The ice maker features a built-in self-cleaning system. To activate, ensure the water reservoir is filled, then press the 'Clean' button. The machine will run a cycle to clean internal components.
2. 석회질 제거 : To minimize limescale buildup, descale your machine once a month. If you live in an area with hard water, descaling every two to three weeks is recommended.
3. Water Scale Inhibitor: For best results and to further reduce scale buildup, use a water scale inhibitor. Contact customer service for a complimentary sample after purchase.

Figure 3: Descaling Frequency Guide based on Water Hardness

4. 배수하는 물: The machine has a drainage hose on the back. To drain water, pull out the tube bracket from the back of the machine and allow all water to drain into a sink or container.

Figure 4: Drainage Hose Location

Figure 5: Automatic Water Refill Connection

7. 문제 해결

If you encounter issues with your Gevi Nugget Ice Maker, please refer to the following common solutions:

• False Low-Water Alarm: If the 'Add Water' indicator light is on despite the water tank being full, this may be a false alarm.

1. Turn off the ice maker for 30 minutes.
2. Open the door and remove the ice bin.
3. Pull out the tube bracket from the back of the machine and drain all water from the tank.
4. Remove the filter from the water inlet area and clean it thoroughly with a brush to remove any clogs or debris.
5. Use a toothpick to gently rotate the water inlet area to check if the pump is blocked.
6. Reinstall the cleaned filter.
7. Refill the water tank with clean water to the recommended level.
8. Restart the ice maker. If the alarm disappears, the problem is resolved.

• 특이한 소음: If the machine produces loud rattling or squeaking noises, ensure it is placed on a stable surface and that no internal components are obstructed. If the issue persists, contact customer support.

8. 사양

9. 보증 및 지원

공식 또는 공인 채널을 통해 구매한 모든 Gevi 제품은 다음과 같은 혜택을 받을 수 있습니다. 12개월 보증 그리고 평생 기술 지원. If you encounter any issues with your Gevi ice maker, please feel free to contact Gevi customer service for assistance.

For tutorial videos and additional support, please visit the Gevi Official Store on Amazon.