1. 서론
Thank you for choosing the Zerone S866 Electric LCD Display Panel. This manual provides essential information for the proper installation, operation, and maintenance of your new display. Please read it thoroughly before use to ensure optimal performance and longevity of the product.
그림 1.1: 전면 view of the Zerone S866 Electric LCD Display Panel, showing the screen and control buttons.
2. 제품 특징
- 쉬운 제어: Quick key functionality allows for straightforward control and parameter adjustment.
- 간단한 설치: Includes an LCD bracket for easy mounting on standard 22.2mm handlebars.
- 명확한 전시: Provides clear status and data information with a backlight feature for visibility in low-light conditions.
- 와이드볼tage 호환성: Supports 24V, 36V, 48V, and 60V electric bike systems.
- 내구성 있는 디자인: Constructed from lightweight and robust ABS material, resistant to daily impacts.
3. 사양
| 기인하다 | 값 |
|---|---|
| 품목 유형 | 전기 LCD 디스플레이 패널 |
| 재료 | ABS |
| 무게 | 대략. 104g (3.7oz) |
| 볼륨 매칭tage | 24V, 36V, 48V, 60V |
| Bracket Diameter | 22.2mm (0.9in) |
| 방수등급 | IP65 |
| 패키지 크기 | 4.33 x 3.15 x 2.76 인치 |
| 모델 번호(내부) | Zeroneg8dm6uy9fp |
4. 패키지 내용
패키지를 열 때 모든 품목이 들어 있고 상태가 양호한지 확인하세요.
- 1 x Zerone S866 Electric LCD Display Panel
- 1 x 사용 설명서(이 문서)
5. 설정 및 설치
Follow these steps to properly install your Zerone S866 LCD Display Panel on your electric bicycle:
- 핸들바 준비: Ensure the handlebar area where you intend to mount the display is clean and free of obstructions. The display is designed for 22.2mm diameter handlebars.
- 디스플레이 장착: Use the included bracket to securely attach the S866 display to your handlebar. Tighten the screws firmly but do not overtighten to avoid damage.
- 배선 연결: Carefully connect the display's cable to the corresponding port on your electric bicycle's controller or wiring harness. Ensure the connectors are fully seated and secure. Refer to your electric bike's wiring diagram if unsure.
- 케이블 관리 : Route the cable neatly along your bike frame and secure it with cable ties to prevent snagging or damage during riding.
- 초기 전원 켜기: Once installed and connected, power on your electric bike. The display should illuminate and show initial data.
Figure 5.1: The S866 display panel shown mounted on bicycle handlebars, ready for connection.
그림 5.2: 후면 view of the S866 display, highlighting the integrated connection cable.
6. 사용 설명서
The Zerone S866 LCD Display Panel provides clear information and easy control over your electric bike's functions.
그림 6.1: 클로즈업 view of the S866 display, showing the digital speed, battery indicator, assist level, and trip distance.
6.1. 버튼 기능
- 전원 버튼 (ⓘ):
- 길게 눌러서 디스플레이를 켜거나 끕니다.
- Short press to cycle through display modes (e.g., Odometer, Trip Distance).
- 위로 버튼(+):
- Short press to increase assist level or navigate menu options upwards.
- Long press (in certain modes) for specific functions (e.g., headlight control, if supported by your bike's controller).
- 아래쪽 버튼(-):
- Short press to decrease assist level or navigate menu options downwards.
- Long press (in certain modes) for specific functions.
6.2. 디스플레이 정보
LCD 화면은 실시간 데이터를 제공합니다.
- 속도: 현재 주행 속도(km/h 또는 mph).
- 배터리 수준: Graphical indicator showing remaining battery charge.
- 지원 수준: 현재 페달 보조 레벨(예: 0-5).
- 여행 거리: 이번 라이딩 중 이동 거리.
- 주행거리계: Total distance covered by the bike.
- 오류 코드: 시스템 오류가 발생하면 특정 오류 코드를 표시합니다.
6.3. 파라미터 조정
The display allows for basic parameter adjustments. Typically, this involves entering a settings menu by holding a combination of buttons (e.g., Up and Down simultaneously) for a few seconds. Common adjustable parameters may include:
- Unit System (km/h vs. mph)
- 휠 직경
- 배터리 용량tage 설정
Note: Specific parameter adjustment procedures may vary slightly. Refer to your electric bike's main controller manual for advanced settings.
7. 유지관리 및 관리
To ensure the longevity and proper functioning of your Zerone S866 LCD Display Panel, follow these maintenance guidelines:
- 청소: 디스플레이 화면과 본체는 부드러운 천으로 닦아주세요.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as they can damage the plastic and screen.
- 물 노출: While the display has an IP65 waterproof rating, avoid submerging it in water or exposing it to high-pressure water jets (e.g., from a power washer). Dry any moisture promptly.
- 온도: Avoid exposing the display to extreme temperatures, both hot and cold, for extended periods.
- 영향: Protect the display from physical impacts and drops, which can cause internal or external damage.
- 사이: 배선 연결부가 안전하고 부식되지 않았는지 주기적으로 점검하십시오.
8. 문제 해결
If you encounter issues with your Zerone S866 LCD Display Panel, try the following troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 켜지지 않습니다 | No power from bike; Loose connection; Damaged display. | Ensure bike battery is charged and turned on. Check all wiring connections. If problem persists, contact support. |
| Incorrect speed/distance reading | Incorrect wheel diameter setting; Sensor issue. | Verify wheel diameter setting in display parameters. Check speed sensor and magnet on your bike. |
| 버튼이 반응하지 않음 | 소프트웨어 오류, 물리적 손상. | Try turning the display off and on again. Inspect buttons for physical damage. |
| 디스플레이에 오류 코드가 표시됨 | System malfunction (motor, controller, battery). | Consult your electric bike's main controller manual for specific error code meanings and solutions. |
If these steps do not resolve the issue, please contact Zerone customer support or your electric bike dealer for further assistance.
9. 보증 및 지원
For specific warranty information regarding your Zerone S866 Electric LCD Display Panel, please refer to the warranty card included with your purchase or contact the seller directly. Zerone is committed to providing quality products and customer satisfaction.
For technical support or inquiries, please visit the official Zerone store on Amazon or contact their customer service channels as provided at the point of purchase.
Zerone Store Link: https://www.amazon.com/stores/Zerone/page/A619C4D9-FCE5-459B-B745-8DD2D44F2669
