1. 서론
The Elvie Stride 2 Double Breast Pump is a revolutionary hospital-grade, app-controlled, hands-free, and wearable electric breast pump designed to provide maximum comfort and efficiency for expressing milk. Its ultra-quiet operation and discreet design allow you to pump anytime, anywhere, seamlessly integrating into your daily life. With 10 intensity settings and smart app control, you can personalize your pumping experience and track your progress with ease.
2. 상자 안에 무엇이 들어있나요?
Your Elvie Stride 2 Double Breast Pump package includes all the essential components for a complete pumping experience:
- 1 x 허브
- 2 x 밸브
- 2 x Diaphragm and Stopper
- 2 x Cup fronts
- 2 x 28 mm soft-silicone Breast Shield
- 2 x Caps and tubes
- Nipple sizing tool with 6 nipple inserts (15 mm, 17 mm, 19 mm, 21 mm, 24 mm, 28 mm)
- 1 x Hub cover and waist clip
- 1 x USB-C 충전 케이블
3. 설정 가이드
3.1 Charging the Hub
Before first use, fully charge the Elvie Stride 2 Hub using the provided USB-C charging cable. Connect the cable to the hub and a suitable USB power source. A full charge takes approximately 95 minutes and provides power for up to 5 pumping sessions.
3.2 Assembling the Cups
Assemble the breast shields, diaphragms, valves, and cup fronts according to the instructions in the quick start guide. Ensure all parts are securely fitted to prevent leaks and maintain suction. Use the nipple sizing tool to select the correct nipple insert for optimal comfort and milk output.
3.3 앱 연결하기
Download the Elvie app from your smartphone's app store. Follow the in-app instructions to pair your Elvie Stride 2 Hub. The app allows for remote control, adjustment of intensity settings, and tracking of your pumping history.
4. Operating Your Elvie Stride 2
4.1 전원 켜기/끄기
Press and hold the power button on the hub to turn the pump on or off. The indicator lights will confirm the status.
4.2 Adjusting Suction Settings
Use the '+' and '-' buttons on the hub to adjust the suction intensity. There are 10 intensity settings available to find your most comfortable and effective level. You can also switch between Stimulation and Expression modes.
4.3 Using the App for Control
For enhanced control, use the Elvie app. You can start, pause, and stop pumping sessions, adjust intensity, switch modes, and monitor your session duration and milk volume (estimated) directly from your phone.
4.4 Pumping Session Tips
- Ensure cups are properly positioned and sealed against your breast.
- Start with a lower suction level and gradually increase to a comfortable yet effective setting.
- Pump for 15-20 minutes per session, or until milk flow significantly slows.
- Empty cups carefully after each session to avoid spills.
5. 청소 및 유지 관리
Proper cleaning and maintenance are crucial for the hygiene and longevity of your Elvie Stride 2 pump. All washable parts are dishwasher safe for convenience.
5.1 일일 청소
- After each use, disassemble all parts that come into contact with milk (cups, breast shields, valves, diaphragms).
- Wash these parts in warm, soapy water or place them on the top rack of your dishwasher.
- 깨끗한 물로 깨끗이 헹구세요.
- Air dry on a clean paper towel or drying rack. Do not use a cloth towel as it may leave lint.
5.2 살균
Sterilize parts once a day by boiling them in water for 5 minutes, using a steam sterilizer, or a microwave sterilizer bag. Ensure parts are completely cool before handling.
5.3 보관
Store clean, dry pump parts in a clean, dry place when not in use. Keep the hub clean by wiping it with a damp 옷감; 물에 담그지 마십시오.
6. 일반적인 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 흡입력이 낮거나 없음 | Improper assembly, damaged valve/diaphragm, incorrect flange size, low battery. | Ensure all parts are correctly assembled and securely fitted. Check valves and diaphragms for tears or damage and replace if necessary. Verify battery level and charge if low. Ensure correct nipple insert size is used. |
| Milk leaking from cups | Cups not sealed properly, overfilled cups, damaged cup seal. | Ensure cups are correctly assembled and form a tight seal against your breast. Do not overfill cups; empty them when full. Inspect cup seals for damage. |
| 앱 연결 문제 | Bluetooth off, app not updated, hub not powered on. | Ensure Bluetooth is enabled on your phone. Update the Elvie app to the latest version. Make sure the Elvie Stride 2 Hub is powered on and within range. Try restarting both the app and the hub. |
| 배터리가 충전되지 않음 | Faulty cable, power source issue, hub not connected properly. | Try a different USB-C cable and power adapter. Ensure the cable is securely plugged into the hub and the power source. |
7. 제품 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | EB01-22 |
| 패키지 크기 | 8.35 x 6.73 x 5.24 인치 |
| 품목 무게 | 2.43 Pounds (approx. 0.35 lbs in-bra weight per cup) |
| 배터리 | 1개의 리튬 이온 배터리(포함) |
| 충전 시간 | 완전 충전까지 약 95분 소요 |
| Sessions per Charge | 최대 5회 세션 |
| 흡입력 강도 | Up to -300 mmHG (hospital-grade) |
| 소음 수준 | 36 dB (whisper quiet) |
| 재료 | Silicone (BPA Free) |
| 특별 기능 | Double Pump, Hands Free Usage, Wearable, App-Controlled |
8. 보증 및 고객 지원
8.1 보증 정보
Elvie products are designed and manufactured to the highest quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Elvie web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
8.2 고객 지원
If you encounter any issues or have questions regarding your Elvie Stride 2 Double Breast Pump, please contact Elvie Customer Support. You can find contact information, FAQs, and additional resources on the official Elvie web대지:
Please note that statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
