1. 소개 및 안전 정보
This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your Einhell TC-SB 245 L Bandsaw. Read all instructions carefully before use to prevent injury and ensure proper function.
일반 안전 경고
- 안전 안경, 청력 보호 장비, 방진 마스크 등 적절한 개인 보호 장비(PPE)를 항상 착용하세요.
- 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.
- 작동 중인 기계에 어린이와 주변 사람들이 접근하지 못하도록 하십시오.
- Disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Never operate the bandsaw with guards removed or damaged.
- Use the provided push bar for feeding small workpieces to maintain a safe distance from the blade.
- Ensure the safety switches on the machine's access doors are functioning correctly. The machine will not start if these doors are not securely closed.
2. 제품 오버view
The Einhell TC-SB 245 L Bandsaw is designed for precise cutting of various materials, primarily wood. It features a robust induction motor and a stable design for consistent performance.
이미지 2.1: 이상view of the Einhell TC-SB 245 L Bandsaw, showcasing its red and black housing, saw table, and blade assembly.
주요 특징
- Large, Stable Desk: The aluminum work table provides a generous working surface with a 245 mm gap width, suitable for medium-sized workpieces.
- 통합 LED 조명: Illuminates the work area for improved visibility during operation.
- Infinitely Adjustable Tilting Saw Table: Allows for precise miter cuts.
- Adjustable Angled Fence: Ensures flexibility and accuracy for various cutting angles.
- Tool-Free Saw Blade Change: Simplifies blade replacement.
- Durable Induction Motor: Provides strong pulling force, operates smoothly, and requires minimal maintenance.
- Safety Push Bar: Included for safe material handling.
이미지 2.2: 상세 view of the saw table, blade, and adjustable fence, highlighting the precision components.
3. 설정
3.1 포장 풀기 및 조립
- 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
- Inspect all parts for damage. Do not use the machine if any parts are damaged.
- Assemble the stand (if applicable) and securely mount the bandsaw. Ensure the machine is stable on a level surface.
3.2 Saw Blade Installation/Change
The Einhell TC-SB 245 L features a tool-free saw blade change mechanism.
이미지 3.1: Example of bandsaw blades, illustrating the type of blade used with this machine.
- 전원 분리: Always unplug the machine before changing the blade.
- Open access doors: Unlock and open the upper and lower access doors to expose the blade wheels.
- Release blade tension: Use the tension knob (usually located at the top) to loosen the blade.
- 기존 칼날을 제거하세요: Carefully remove the old blade from the wheels and blade guides.
- 새 칼날을 설치하세요: Place the new blade onto the wheels, ensuring the teeth are pointing downwards towards the table. Guide the blade through the upper and lower blade guides.
- Tension blade: Adjust the tension knob until the blade is properly tensioned. Refer to the markings or a tension gauge if available.
- Adjust blade tracking: Rotate the upper wheel by hand to check blade tracking. Adjust the tracking knob (if present) until the blade runs centrally on the wheels.
- Close access doors: Securely close both access doors. The machine will not operate if these doors are not fully closed due to integrated safety switches.
3.3 Adjusting the Saw Table and Fence
Image 3.2: Illustration of the saw table tilting mechanism, indicating its adjustable range for miter cuts.
- Tilting Saw Table: Loosen the locking knob beneath the table to adjust the tilt angle. Use the angle scale for precise settings. Tighten the knob firmly once the desired angle is set.
- Angled Fence: The fence can be adjusted along the table for parallel cuts. Loosen its locking mechanism, slide it to the desired position, and secure it. The fence can also be angled for specific cuts.
이미지 3.3: 클로즈업 view of the adjustable angled fence, showing its positioning and locking mechanism.
4. 운영
4.1 시작 및 중지
- Ensure all safety guards are in place and access doors are closed.
- Connect the machine to a suitable power outlet.
- Press the green 'ON' button to start the bandsaw.
- Press the red 'OFF' button to stop the bandsaw.
4.2 절단 절차
Image 4.1: A user demonstrating the proper technique for cutting a wooden workpiece on the bandsaw.
- 작업물 준비: 재료에 자를 선을 명확하게 표시하세요.
- 날 가이드 조정: Position the upper blade guide assembly so it is approximately 3-6 mm (1/8-1/4 inch) above the workpiece.
- 머신 시작: Turn on the bandsaw and allow the blade to reach full speed before beginning the cut.
- Feed Material: Gently feed the workpiece into the blade, following your marked line. Use the push bar for smaller pieces or when hands are close to the blade. Maintain a steady, even pressure.
- LED 조명 활용: The integrated LED light can be switched on to improve visibility of the cutting line.
Image 4.2: The integrated LED light providing illumination to the cutting area for enhanced precision.
5. 유지관리
정기적인 유지보수는 밴드톱의 수명 연장과 안전한 작동을 보장합니다.
5.1 청소
- 전원 분리: 청소하기 전에 항상 기기의 플러그를 뽑으십시오.
- 먼지 추출: The bandsaw is equipped with a dust extraction port. Connect a suitable dust extractor or shop vacuum to this port during operation to minimize sawdust accumulation.
Image 5.1: Demonstrating the connection of a vacuum hose to the bandsaw's dust extraction port for efficient chip removal.
- 일반 청소: Use a brush or compressed air to remove sawdust and debris from the table, blade guides, and motor vents. Do not use solvents that could damage plastic parts.
5.2 날 점검 및 교체
- Regularly inspect the blade for sharpness, cracks, or missing teeth. A dull or damaged blade can lead to poor cuts and increased risk of kickback.
- Replace worn or damaged blades promptly following the instructions in Section 3.2.
6. 문제 해결
This section addresses common issues you might encounter with your bandsaw.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기계가 시작되지 않습니다 | Power cord not plugged in; Safety access doors not closed; Faulty power switch. | Check power connection; Ensure all access doors are securely closed; Contact service if switch is faulty. |
| 칼날이 흔들리거나 정확하지 않게 잘립니다. | Dull blade; Incorrect blade tension; Improperly adjusted blade guides; Incorrect blade tracking. | Replace blade; Adjust blade tension; Adjust blade guides; Adjust blade tracking. |
| 과도한 진동이나 소음 | Loose components; Damaged blade; Unbalanced wheels. | Check all fasteners; Replace damaged blade; Contact service for wheel balancing. |
여기에 나열되지 않은 문제가 발생하거나 해결 방법으로 문제가 해결되지 않으면 Einhell 고객 지원팀에 문의하십시오.
7. 사양
Technical data for the Einhell TC-SB 245 L Bandsaw (Model 4308036).
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 4308036 |
| 제조업체 | 아인헬 |
| 품목 무게 | 24.6 킬로그램 |
| 제품 치수 | 53.5 x 42 x 83.5cm |
| 전원 | 코드식 전기 |
| 손잡이 재질 | 알류미늄 |
| 블레이드 소재 | Carbon Steel (Kohlenstoffstahl) |
| 특별 기능 | Brushless (Bürstenlos) |
| 포함된 구성 요소 | 베어 도구 |
8. 보증 및 지원
보증 정보는 제품에 동봉된 보증 카드를 참조하거나 아인헬 공식 웹사이트를 방문하십시오. web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Contact details can typically be found on the Einhell web사이트나 제품 설명서에서 확인하세요.
