Fender Bassman 딜레이 페달 모델 0234612000 사용 설명서

1. 제품 오버view

The Fender Bassman Delay Pedal is an effects unit designed for bass instruments, drawing inspiration from Fender's Bassman amplifier line. It features meticulously crafted analog and digital circuits for bass-centric tonal expansion. The pedal offers two professional DSP algorithms specifically engineered to repeat bass signals, allowing users to select between smooth analog repeats or crisp digital delay tones. Controls for time and feedback determine the delay duration and number of repeats. A 'low' switch allows shaping the low-frequency presence in delay repeats, enabling users to either keep the low end clear by fading repeats lightly or duplicate the full signal for more pronounced effects.

• Bass-tuned analog and digital delay DSP algorithms with analog dry-through.
• Low switch for sculpting low frequency presence in delay repeats.
• Internal high cut and low cut controls for fine-tuning delay repeat frequency content.
• Soft-touch switchable true or buffered bypass with trails.
• Side-mounted pad switch for compatibility with active basses.

이미지 1.1: 앞쪽 view of the Fender Bassman Delay Pedal. This image displays the pedal's control layout, including the Time, Feedback, and Level knobs, along with the Type and Low toggle switches, and the footswitch.

2. 설정

Follow these steps to properly set up your Bassman Delay Pedal:

1. 전원 연결: Connect a 9-volt DC power supply (not included) to the "9V DC IN" jack located on the top of the pedal. Ensure the power supply is center-negative.
2. 입력 연결: Connect your bass guitar or other instrument to the "IN" jack using a standard 1/4-inch instrument cable.
3. 출력 연결: "OUT" 잭을 귀하의 장치에 연결하십시오. amp표준 1/4인치 악기 케이블을 사용하여 신호 체인의 다음 페달이나 리파이어를 연결합니다.
4. 패드 스위치: If you are using an active bass with a high output, engage the side-mounted pad switch to prevent signal clipping and ensure optimal performance. This switch is located on the side of the pedal.

이미지 2.1: 맨 위 view of the Fender Bassman Delay Pedal, showing the "IN" and "OUT" 1/4-inch audio jacks and the "9V DC IN" power input.

3. 운영

The Bassman Delay Pedal features intuitive controls for shaping your delay effects:

• 시간 노브: Adjusts the delay time, controlling the interval between repeats.
• 피드백 노브: 지연 반복 횟수를 조절합니다. 값이 높을수록 반복 횟수가 많아집니다.
• 레벨 노브: Sets the volume of the delay repeats relative to your dry signal.
• 유형 스위치: Toggles between two distinct delay algorithms:
  • 비슷한 물건: Provides warm, smooth, and decaying repeats characteristic of vintag아날로그 지연 장치.
  • 디지털: Offers crisp, clear, and precise repeats.
• LOW Switch: Modifies the low-frequency content of the delay repeats.
  • 위 위치: Reduces low frequencies in the repeats, keeping the bass signal clear and preventing muddiness.
  • 아래 위치: Allows the full frequency range of the signal to be repeated, suitable for beat-repeat effects or when a fuller delay sound is desired.
• 풋스위치: Engages or bypasses the delay effect. This pedal features a soft-touch switchable true or buffered bypass with trails, meaning repeats can naturally decay even after the effect is disengaged if trails mode is active (internal setting).

이미지 3.1: 각진 view of the Fender Bassman Delay Pedal, highlighting the control knobs and toggle switches for Time, Feedback, Level, Type, and Low.

Internal Controls (High Cut and Low Cut)

The Bassman Delay Pedal includes internal high cut and low cut controls. These are trim pots located inside the pedal enclosure and are intended for advanced users to fine-tune the frequency content of the delay repeats beyond what the external LOW switch offers. Accessing these controls requires opening the pedal, which should be done with care to avoid damaging components.

4. 유지관리

To ensure the longevity and optimal performance of your Bassman Delay Pedal:

• 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
• 저장: 페달은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 사이: 주기적으로 모든 케이블 연결부의 마모 상태를 점검하십시오. 신호 손실이나 노이즈를 방지하려면 손상된 케이블은 교체하십시오.
• 전원 공급 장치: Always use a compatible 9V DC center-negative power supply. Incorrect power can damage the unit.

5. 문제 해결

If you encounter issues with your Bassman Delay Pedal, consider the following:

• 소리 없음:
  • 모든 케이블(입력, 출력, 전원)이 단단히 연결되어 있는지 확인하십시오.
  • Verify the power supply is functioning and correctly connected (9V DC, center-negative).
  • 악기와 amplifier가 올바르게 작동하고 있습니다.
  • Ensure the pedal's footswitch is engaged.
• 약하거나 왜곡된 소리:
  • Check the LEVEL knob setting; it might be too low or too high.
  • If using an active bass, ensure the side-mounted pad switch is engaged.
  • 케이블에 손상이 있는지 점검하십시오.
• Delay Not Apparent:
  • Check the TIME and FEEDBACK knob settings; they might be set too low.
  • Ensure the pedal is engaged.
• 과도한 소음:
  • 안정적인 전원 공급 장치를 사용하고 있는지 확인하십시오.
  • 설정에서 접지 루프를 확인하세요.
  • Try isolating the pedal from other electronics.

If problems persist, consult the Fender support resources.

6. 사양

7. 보증 및 지원

This Fender product is covered by a manufacturer's warranty. For detailed warranty information, product registration, or technical support, please refer to the official Fender website or contact Fender customer service directly. Keep your purchase receipt as proof of purchase.

추가 지원을 받으려면 다음을 방문하세요. 펜더 지원 페이지.